Introduzione
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Honeywell Home Friedland D814 Sesame Bell Push. Please read these instructions carefully before use and retain them for future reference.
The Friedland D814 is a slim, white plastic bell push designed for surface mounting. Its decorative and compact design makes it suitable for narrow door frames. It is weather-resistant for outdoor use and features an easy-to-install, surface-mounted design.
Informazioni importanti sulla sicurezza
- Scollegare l'alimentazione: Before installation, ensure the power supply to the doorbell system is disconnected at the mains to prevent electrical shock.
- Wired System: This product is designed for wired doorbell systems. Do not attempt to connect it to wireless systems unless explicitly stated as compatible by the manufacturer.
- Verifica della compatibilità: Before proceeding with installation, check the compatibility of this bell push with your existing doorbell chime and wiring system.
- Resistenza alle intemperie: The bell push is rated IP44, indicating protection against solid objects larger than 1mm and splashing water from any direction. While weather-resistant, avoid direct high-pressure water jets.
- Installazione professionale: Installation should be performed by a competent individual. If in doubt, consult a qualified electrician.
- Viti di fissaggio: Use only the supplied fixing screws or appropriate alternatives for secure mounting.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione.
- 1 x Friedland D814 Sesame Bell Push (White)
- Fixing Screws (Quantity as supplied by manufacturer)
Configurazione e installazione
The Friedland D814 bell push is designed for easy surface mounting.
- Scegli la posizione: Select a suitable location near your door frame. The slim design is ideal for narrow door frames. Ensure the surface is flat and clean.
- Scollegare l'alimentazione: Turn off the power to your existing doorbell system at the main circuit breaker.
- Segnare i punti di foratura: Hold the bell push in the desired position and mark the screw hole locations on the wall or door frame.
- Praticare i fori pilota: Drill small pilot holes at the marked locations. Use a drill bit appropriate for your wall material.
- Collegare il cablaggio: Carefully connect the existing doorbell wires to the terminals on the back of the D814 bell push. Ensure a secure connection. Refer to your existing doorbell chime's wiring diagram if unsure.
- Mount Bell Push: Align the bell push with the pilot holes and secure it using the supplied fixing screws. Ensure the bell push is firmly attached to the surface. The design allows for screws to be concealed for a neat finish.
- Ripristina alimentazione: Once installation is complete and all connections are secure, restore power to your doorbell system at the main circuit breaker.
- Funzionalità di prova: Press the bell push to ensure your doorbell chime rings correctly.
Image: Friedland D814 Sesame Bell Push showing its compact dimensions of 55mm height, 24mm width, and 18mm depth. The bell push is white with a central black-ringed button.
Istruzioni per l'uso
The Friedland D814 Sesame Bell Push operates as a standard wired doorbell button.
- Premendo il pulsante: To activate your doorbell chime, simply press the central button firmly.
- Pubblicazione: Release the button once the chime has sounded.
This bell push is designed for reliable, straightforward operation with compatible wired doorbell chimes.
Manutenzione
The Friedland D814 bell push requires minimal maintenance.
- Pulizia: Pulire la superficie con un panno morbido, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the plastic finish.
- Ispezione: Periodically check the bell push for any signs of damage or loose connections, especially if exposed to harsh weather conditions.
- Resistenza alle intemperie: The IP44 rating ensures protection against splashing water. However, prolonged exposure to extreme weather or direct high-pressure water should be avoided to maximize product lifespan.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Doorbell does not ring when button is pressed. | No power to the doorbell system. | Controllare l'interruttore automatico e assicurarsi che l'alimentazione venga ripristinata. |
| Collegamenti elettrici allentati o errati. | Disconnect power, then check and re-secure all wiring connections at the bell push and chime. | |
| Faulty doorbell chime or transformer. | Test the chime and transformer independently if possible, or consult a qualified electrician. | |
| Il pulsante del campanello sembra duro o bloccato. | Accumulo di sporcizia o detriti. | Gently clean around the button with a soft, dry brush or cloth. Avoid using lubricants. |
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti o un elettricista qualificato.
Specifiche
- Modello: D814
- Marca: Casa Honeywell
- Produttore: Friedland
- Tipo: Pulsante del campanello cablato
- Materiale: Plastica
- Colore: Bianco
- Fine: Matt Bianco
- Stile: Classico
- Tipo di montaggio: Montaggio a parete in superficie
- Dimensioni (A x L x P): 55 mm x 24 mm x 18 mm (circa 5.5 x 2.4 x 1.8 cm)
- Peso: 16 grammi
- Grado di protezione IP (Ingress Protection): IP44 (Weather resistant)
- Tipo di sorgente luminosa: LED (Not bright)
- Batterie: Non richiesto
- Fonte di energia: Cablato
Garanzia e supporto
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Honeywell Home websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
For technical assistance or further inquiries, please contact Honeywell Home customer service.