1. Introduzione
This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Sennheiser MD 46 cardioid interview microphone. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Prodotto finitoview
The Sennheiser MD 46 is a high-quality dynamic microphone specifically designed for interview and reporting applications. Its cardioid pickup pattern effectively focuses on the subject's voice while minimizing background noise, making it suitable for challenging environments. The microphone features a robust construction to withstand the rigors of field use.
Caratteristiche principali:
- Cardioid Dynamic Capsule: Provides focused sound capture and excellent speech intelligibility.
- Double Layer Grille Basket: Offers increased protection against wind and plosive noises.
- Basso rumore di movimentazione: Engineered to reduce unwanted noise from physical contact during use.
- Long Handle with Excellent Balance: Designed for comfortable and stable handling during extended interviews.

Figure 1: Sennheiser MD 46 Cardioid Interview Microphone. This image shows the full microphone with its black grille and dark gray body.
3. Impostazione
3.1 Disimballaggio
Carefully unpack the contents of the box. The package should contain:
- 1 x Sennheiser MD 46 Microphone
3.2 Collegamento del microfono
The MD 46 microphone uses an XLR connector for audio output. To connect the microphone:
- Ensure your audio recording device, mixing console, or audio interface is powered off.
- Connect a standard XLR cable (not included) to the XLR output port at the base of the MD 46 microphone.
- Connect the other end of the XLR cable to an available XLR input on your recording device.
- Power on your recording device and adjust input gain levels as necessary.

Figure 2: Close-up of the MD 46 microphone grille. This image highlights the robust double-layer grille designed to protect against wind and plosive sounds.
4. Istruzioni per l'uso
4.1 Posizionamento del microfono
The MD 46 is a cardioid microphone, meaning it is most sensitive to sounds coming from the front and rejects sounds from the sides and rear. For optimal performance during interviews:
- Position the microphone directly in front of the speaker's mouth, typically 4-8 inches away.
- Ensure the microphone grille is pointed towards the sound source.
- In noisy environments, maintaining closer proximity to the speaker will enhance voice clarity and further reduce background noise.
4.2 Handling Noise Reduction
The MD 46 is designed with low handling noise characteristics. To further minimize any unwanted noise from handling:
- Hold the microphone firmly but gently by the handle.
- Avoid rubbing or tapping the microphone body during recording.
- If using a microphone stand, ensure it is stable and isolated from vibrations.
4.3 Wind and Pop Noise
The integrated double-layer grille helps to reduce wind and plosive (P, B sounds) noise. For outdoor use or in situations with strong air movement, consider using an additional foam windscreen (not included) for maximum protection.
5. Manutenzione
5.1 Pulizia
To maintain the appearance and performance of your microphone:
- Wipe the microphone body with a soft, dry cloth.
- Per lo sporco ostinato, una leggera damp è possibile utilizzare un panno e procedere immediatamente all'asciugatura.
- Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish or internal components.
- Avoid getting moisture into the microphone grille or connector.
5.2 Conservazione
When not in use, store the microphone in a clean, dry place, away from extreme temperatures and humidity. Using a protective pouch or case (not included) is recommended to prevent dust accumulation and physical damage.
6. Risoluzione Dei Problemi
If you encounter issues with your MD 46 microphone, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| No sound or low output |
|
|
| Rumore di fondo eccessivo |
|
|
| Popping sounds (plosives) |
|
|
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti Sennheiser.
7. Specifiche
The following table lists the technical specifications for the Sennheiser MD 46 microphone:
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | MD 46 |
| Numero modello articolo | 005172 |
| Marca | Sennheiser |
| Modello polare | Cardioide (unidirezionale) |
| Risposta in frequenza | 40 - 18,000 Hz |
| Sensitivity (free field, no load, 1kHz) | 2.0 mV/Pa |
| Impedenza nominale | 350 Ohm |
| Min. Terminating Impedance | 1000 Ohm |
| Tipo di connettore | XLR |
| Tecnologia di connettività | Cablato |
| Fattore di forma del microfono | Portatile |
| Materiale | Acciaio legato |
| Colore | Nero |
| Dimensioni articolo (L x P x A) | 5.31 x 2.6 x 13.78 pollici |
| Peso dell'articolo | 1.9 libbre (360 g) |
| Usi consigliati | Discorso |
| Componenti inclusi | 1 MD 46 Microphone |
8. Informazioni sulla garanzia
Sennheiser products are covered by a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Sennheiser websito per informazioni dettagliate.
9. Supporto
For further assistance, technical support, or to access additional resources such as FAQs and firmware updates, please visit the official Sennheiser support websito:
You can also find more information about Sennheiser products on their Amazon store page: Sennheiser Amazon Store