Manuale di istruzioni per cacciavite a bussola con punta da 1/4 di pollice Klein Tools 630-1/4

1. Introduzione

The Klein Tools 630-1/4 is a 1/4-inch tip nut driver designed for various applications. It features a full hollow shaft, allowing it to accommodate long bolts or studs, which is particularly useful for tasks such as working on stacked circuit boards. The tool is constructed with a chrome-plated shaft for corrosion resistance and a cushion-grip handle for enhanced comfort and torque during use. This tool is manufactured in the USA and meets or exceeds applicable ASME/ANSI specifications.

Un overhead view of the Klein Tools 630-1/4 nut driver, showcasing its 1/4-inch tip, hollow shaft, and black cushion grip handle with a yellow accent.

2. Caratteristiche del prodotto

• 1/4-Inch Tip: Standard size for common fasteners.
• Full Hollow Shaft: Facilitates work on stacked circuit boards or other long bolt applications by allowing bolts to pass through.
• Cushion-Grip Handle: Provides greater torque and comfort during prolonged use.
• Tip-Ident®: Patented feature for quick identification of the nut driver and its size.
• Color-Coded Handle End: Aids in easy identification of the tool's size.
• Chrome-Plated Shaft: Offers a smooth feel and enhanced corrosion resistance.
• Integral Flanges: Provide a solid, twist-resistant anchor for the shaft.
• Prodotto negli USA: Prodotto negli Stati Uniti.
• Conformità: Meets or exceeds applicable ASME / ANSI specifications.

A detailed diagram highlighting key features of the Klein Tools nut driver, including integral flanges for a twist-resistant blade anchor, hollow shafts for long bolts, chrome-plated shaft for corrosion resistance, and cushion-grip handles with Tip-Ident for greater torque and comfort. The image also notes 'MADE IN USA'.

3. Informazioni sulla sicurezza

AVVERTIMENTO: Quando si utilizza questo strumento, indossare sempre protezioni per gli occhi omologate.

ATTENZIONE: This tool is NOT insulated. It will NOT protect against electrical shock. Do not use on or near live electrical circuits.

4. Istruzioni per l'uso

4.1. Impostazione

No specific setup is required for this hand tool. Ensure the nut driver tip matches the size of the fastener you intend to turn. The 630-1/4 is designed for 1/4-inch hex fasteners.

4.2. Operating the Nut Driver

1. Select the correct nut driver size (1/4-inch for this model) for your fastener. The color-coded handle end and Tip-Ident feature assist in quick selection.
2. Place the hollow shaft of the nut driver over the fastener. For long bolts or threaded rods, the hollow shaft allows the excess length to pass through, ensuring full engagement with the nut.
3. Apply firm, steady pressure while rotating the handle clockwise to tighten or counter-clockwise to loosen the fastener. The cushion-grip handle is designed to provide comfort and maximize torque.
4. Ensure the nut driver is fully seated on the fastener to prevent slipping and potential damage to the fastener or injury.

A person wearing green and black work gloves uses the Klein Tools 630-1/4 nut driver to tighten a fastener on an electrical panel, demonstrating its practical application.

5. Manutenzione

To ensure the longevity and optimal performance of your Klein Tools 630-1/4 nut driver:

• Keep the tool clean and free from dirt, grease, and debris.
• Wipe the chrome-plated shaft with a clean, dry cloth after each use to maintain its corrosion resistance.
• Store the tool in a dry environment to prevent rust or material degradation.
• Inspect the tool periodically for any signs of wear or damage. Discontinue use if the tool is compromised.

6. Specifiche

7. Garanzia e supporto

This Klein Tools 630-1/4 Nut Driver comes with a Garanzia del produttore di 1 anno.

For further support, product information, or to explore other tools, please visit the official Klein Tools store or contact their customer service.

Visitare il Negozio KLEIN TOOLS.