Introduzione
This manual provides essential instructions for the safe and effective use of your LENOX Tools 210979110GR Gold Power Arc Reciprocating Saw Blade. Designed for thick metal cutting, this blade features advanced technology for enhanced durability and cutting performance. Please read this manual thoroughly before use and retain it for future reference.
Image: LENOX Gold Power Arc Reciprocating Saw Blade, featuring a curved design and Titanium Nitride coating for thick metal cutting.
Caratteristiche principali:
- Delivers up to 2X longer life versus traditional straight LENOX reciprocating saw blades.
- Aggressive curved blade design optimizes the blade's angle of attack for faster cutting in various materials.
- T2 Technology and a precision-applied Titanium Nitride coating help dissipate heat, extending blade life.
- Ideal for thick metals, metal demolition, and fire and rescue applications.
- Made in the USA of global components.
Informazioni sulla sicurezza
WARNING: Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection when operating power tools. Disconnect power from the reciprocating saw before changing blades. Refer to your reciprocating saw's instruction manual for specific safety guidelines.
- Ensure the blade is securely fastened in the saw's chuck before operation.
- Do not force the blade through material; allow the blade to cut at its own pace.
- Keep hands and body clear of the cutting path.
- Avoid cutting materials that exceed the blade's recommended capacity.
- Inspect the blade for damage or dullness before each use. Replace damaged or dull blades immediately.
Configurazione e installazione
- Disconnessione dell'alimentazione: Ensure your reciprocating saw is unplugged or its battery pack is removed before attempting to install or remove any blade.
- Selezione della lama: Verify that the LENOX 210979110GR blade is the correct type and size (9-inch, 10 TPI) for your cutting application, specifically thick metal.
- Chuck Opening: Locate the blade chuck on your reciprocating saw. Depending on your saw model, you may need to twist a collar, press a button, or use an Allen wrench to open the chuck jaws.
- Blade Insertion: Insert the shank of the LENOX blade fully into the open chuck. Ensure the blade is seated as far as it can go.
- Fissaggio sicuro: Release the chuck mechanism to securely clamp the blade. Gently pull on the blade to confirm it is firmly held and will not slip during operation.
- Controllo preoperativo: Before reconnecting power, ensure the blade is straight, undamaged, and properly aligned.
Istruzioni per l'uso
- Preparazione del materiale: Secure the workpiece firmly to prevent movement during cutting. Mark your cut line clearly.
- Tool Grip: Hold the reciprocating saw firmly with both hands, maintaining a balanced stance.
- Inizio del taglio: Place the shoe of the saw against the workpiece. Start the saw before the blade contacts the material.
- Azione di taglio: Apply steady, moderate pressure. Allow the blade's aggressive curved design and 10 TPI (Teeth Per Inch) to efficiently cut through thick metal. Avoid excessive force, which can lead to blade overheating or breakage.
- Raffreddamento: For prolonged cuts in thick metal, consider using cutting fluid to reduce heat and extend blade life.
- Completamento del taglio: Maintain control until the cut is complete. Release the trigger only after the blade has fully exited the material.
- Post-Cut: Allow the blade to cool before handling.
Manutenzione
- Pulizia: After each use, clean the blade to remove metal shavings, dust, and debris. A wire brush can be used for stubborn residue.
- Ispezione: Regularly inspect the blade for signs of wear, such as dull teeth, bent sections, or cracks. A dull blade will cut slowly and generate excessive heat.
- Magazzinaggio: Store blades in a dry environment to prevent rust. Keep them in their original packaging or a blade storage case to protect the teeth and prevent accidental injury.
- Sostituzione: Replace blades when they become dull, damaged, or show signs of excessive wear to maintain optimal cutting performance and safety.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Blade cuts slowly or binds | Dull blade, incorrect blade for material, excessive pressure, material not secured. | Replace blade, ensure correct blade type, reduce pressure, secure workpiece. |
| La lama si surriscalda | Excessive friction, dull blade, lack of cutting fluid, too much pressure. | Use cutting fluid, replace dull blade, reduce pressure, allow blade to cool. |
| Blade breaks prematurely | Blade bending/twisting, hitting foreign objects, excessive force, improper installation. | Ensure straight cuts, avoid obstructions, use moderate pressure, verify secure installation. |
| Vibrazione eccessiva | Loose blade, bent blade, worn saw chuck. | Re-secure blade, replace bent blade, inspect saw chuck for wear. |
Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | Lenox |
| Numero di modello | 210979110GR |
| Materiale | Titanium Nitride Coated Bi-Metal |
| Misurare | 9 pollici |
| Denti per pollice (TPI) | 10 |
| Applicazione primaria | Thick Metal Cutting |
| Stile | Confezione da 5 |
| Peso dell'articolo | 0.17 chilogrammi (circa 6 once) |
| Dimensioni del prodotto | 2.13 x 1.25 x 11.13 pollici |
| Codice UPC | 082472210972 |
Garanzia e supporto
For warranty information or technical support regarding your LENOX Tools product, please refer to the official LENOX weboppure contatta direttamente il servizio clienti. Conserva la ricevuta d'acquisto come prova d'acquisto.
LENOX Official Websito: www.lenoxtools.com
