Manuali+

Creative SBS 380

Manuale utente degli altoparlanti Creative SBS 380 2.1

Model: SBS 380 (51MF0290AA000)

Introduzione

The Creative SBS 380 is a 2.1 speaker system designed to provide enhanced audio for various devices, including personal computers, notebooks, MP3 players, and CD players. This system includes two satellite speakers and a dedicated subwoofer, offering a balanced audio experience with clear highs and deep bass. This manual provides essential information for the proper setup, operation, and maintenance of your Creative SBS 380 speaker system.

Contenuto della confezione

Si prega di verificare che tutti i componenti siano presenti nel pacchetto:

Creative SBS 380 2.1 Speaker System with two satellite speakers and one subwoofer

An image showing the Creative SBS 380 2.1 speaker system, consisting of two compact satellite speakers and a larger, cube-shaped subwoofer. The satellite speakers are black with silver grilles, and the subwoofer is black with a side-mounted speaker and a front-facing port.

Impostare

  1. Posizionamento: Position the subwoofer on the floor or a sturdy surface, ensuring adequate ventilation. Place the two satellite speakers on either side of your monitor or listening area, facing towards you for optimal stereo separation.
  2. Collegare gli altoparlanti satellitari: Connect the cables from the two satellite speakers to the corresponding output jacks on the back of the subwoofer. Ensure a secure connection.
  3. Connetti alla sorgente audio: Connect one end of the provided 3.5mm audio input cable to the "Audio In" jack on the subwoofer. Connect the other end to the headphone jack or audio output port of your computer, MP3 player, or other audio device.
  4. Collegamento elettrico: Connect the power adapter to the power input on the subwoofer, then plug the adapter into a standard electrical outlet.

Istruzioni per l'uso

  1. Accensione/spegnimento: Locate the power button on the front panel of the right satellite speaker. Press this button to turn the speakers on or off. An LED indicator will illuminate when the speakers are powered on.
  2. Controllo del volume: Use the master volume control knob, also located on the front panel of the right satellite speaker, to adjust the overall sound level. Turn clockwise to increase volume and counter-clockwise to decrease.
  3. Jack per cuffie: For private listening, plug your headphones into the headphone jack on the front panel of the right satellite speaker. When headphones are connected, audio output from the speakers will be muted.
  4. Riproduzione audio: Ensure your audio source (computer, MP3 player) is playing audio and its volume is set to an appropriate level.

Manutenzione

Risoluzione dei problemi

ProblemaSoluzione
Nessun suono dagli altoparlanti.
  • Ensure the speakers are powered on (LED indicator is lit).
  • Check all cable connections, especially the audio input cable and power adapter.
  • Verify the volume control on the speakers is turned up.
  • Confirm the audio source (computer, MP3 player) is playing and its volume is not muted or too low.
  • Ensure no headphones are plugged into the headphone jack.
Suono distorto o poco chiaro.
  • Ridurre il volume sia degli altoparlanti che della sorgente audio.
  • Check for loose or damaged cable connections.
  • Ensure the audio source is not outputting a distorted signal.
Il subwoofer non produce bassi.
  • Verify all connections to the subwoofer are secure.
  • Ensure the audio source is providing a full-range audio signal.

Specifiche

Garanzia e supporto

For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Creative websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Creative Support: www.creative.com/support