Informazioni importanti sulla sicurezza
AVVERTIMENTO: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.
- Do not use with dimmers or other non-compatible devices.
- Assicurarsi che tutti i collegamenti dei cavi siano sicuri.
- This switch is rated for 120V/277V AC and 20 Amps. Do not exceed these ratings.
- Per un funzionamento sicuro è necessaria la messa a terra.
Prodotto finitoview
The Leviton S08-CS120-02W is a commercial-grade, single-pole AC quiet toggle switch designed for reliable ON-OFF control of lighting or other electrical loads. Its quiet operation makes it suitable for various residential and commercial applications. This switch features a grounding screw for enhanced safety and is UL listed, ensuring compliance with safety standards.
Immagine: Davanti view of the Leviton S08-CS120-02W Commercial Grade AC Quiet Toggle Switch. The image displays a white toggle switch with a standard rectangular faceplate, suitable for wall mounting. The toggle lever is visible in the center, designed for simple up/down operation.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- 1 x Leviton S08-CS120-02W Commercial Grade AC Quiet Toggle Switch
Istruzioni per l'installazione
Strumenti necessari:
- Cacciavite (a croce e/o a taglio)
- Spellafili
- Nastro isolante (facoltativo)
- VoltageTester
Wiring (Single-Pole Switch):
- Spegnimento dell'alimentazione: Locate the circuit breaker or fuse that controls the switch location and turn it OFF. Verify power is off using a voltagetester.
- Rimuovi il vecchio interruttore: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch, noting their connections.
- Collegare i fili: This single-pole switch has three screw terminals: two for the hot (line/load) wires and one for the ground wire.
- Connect the incoming hot wire (from the power source) to one of the brass screw terminals.
- Connect the outgoing hot wire (to the light fixture or load) to the other brass screw terminal.
- Connect the bare copper or green insulated ground wire from the electrical box to the green grounding screw terminal on the switch.
Ensure all wire connections are tight and secure. Use wire nuts if necessary for any splices. The switch is designed for screw terminals.
- Montaggio: Carefully fold the wires into the electrical box. Secure the switch to the electrical box using the provided mounting screws. Ensure the switch is oriented correctly.
- Installa la piastra a muro: Attach the decorative wall plate over the switch.
- Ripristina alimentazione: Turn the power back ON at the circuit breaker or fuse box. Test the switch to ensure proper operation.
Operazione
The Leviton S08-CS120-02W is a simple ON-OFF toggle switch. To operate, simply push the toggle lever up to turn the connected device (e.g., light) ON, and push the toggle lever down to turn it OFF. The switch is designed for quiet operation, minimizing audible clicking sounds during use.
Cura e manutenzione
- Pulizia: To clean the switch, ensure power is off at the circuit breaker. Wipe the surface with a soft, damp panno. Non usare detergenti abrasivi o solventi.
- Ispezione: Ispezionare periodicamente l'interruttore per verificare la presenza di eventuali danni, collegamenti allentati o scolorimento. In caso di problemi, spegnere l'interruttore e consultare un elettricista qualificato.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'interruttore non accende/spegne il dispositivo. | No power to the switch; Loose wiring; Faulty device. | Check circuit breaker/fuse. Verify all wire connections are secure. Test the connected device separately. |
| Switch feels hot to the touch. | Overload; Loose connection. | Immediately turn off power. Reduce load on the circuit. Check for loose wiring. Consult an electrician if the problem persists. |
| Flickering light or intermittent power. | Loose wiring; Faulty bulb/device. | Turn off power and check all wire connections. Replace bulb or test device. |
Specifiche
- Modello: S08-CS120-02W
- Marca: Levitone
- Tipo: Commercial Grade AC Quiet Toggle Switch
- Modalità operativa: ACCESO SPENTO
- Voltage: 120 Volts / 277 Volts AC
- Valutazione attuale: 20 Amps
- Tipo di terminale: Vite
- Tipo di montaggio: Montaggio in superficie
- Materiale di contatto: Silver-cadmium
- Rigidità dielettrica: 1500 volt
- Materiale: Alloy Steel, Polybutylene Terephthalate, Polycarbonate (PC)
- Colore: Bianco
- Specifiche soddisfatte: UL
- Dimensioni dell'articolo (LxWxH): 4.25 x 1.25 x 0.75 pollici
- Peso dell'articolo: 1 libbra
- Codice UPC: 078477069646
Garanzia e supporto tecnico
For warranty information or technical assistance, please contact Leviton customer support directly or visit their official webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.
Ufficiale Leviton Websito: www.leviton.com
