Rheem Richmond 6EP2-1 Electric Water Heater User Manual

1. Introduzione

This manual provides essential instructions for the safe installation, operation, and maintenance of your Rheem Richmond 6EP2-1 Electric Water Heater. This compact 2.5-gallon unit is designed for indoor installation in tight spaces, providing hot water efficiently. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the manufacturer.

• Scollegare sempre l'alimentazione all'unità prima di eseguire qualsiasi intervento di assistenza o manutenzione.
• Installation must comply with all local codes and regulations, including plumbing and electrical codes.
• Do not operate the water heater if it has been exposed to freezing temperatures.
• Assicurarsi che l'unità sia correttamente collegata a terra per evitare scosse elettriche.
• A temperature and pressure relief (T&P) valve must be installed and properly piped to an open drain.
• Do not block or restrict the T&P valve discharge pipe.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• Rheem Richmond 6EP2-1 Electric Water Heater Unit
• Staffa per montaggio a parete
• Manuale di istruzioni (questo documento)

4. Installazione e configurazione

Professional installation is recommended for this appliance. Ensure all local plumbing and electrical codes are followed.

4.1 Posizione e montaggio

Select a location that is protected from freezing temperatures and is as close as possible to the hot water faucet to minimize heat loss. The unit's space-saving design allows for installation in tight spaces.

1. Identify a suitable wall location capable of supporting the weight of the water heater when full (approximately 2.5 gallons of water plus unit weight).
2. Securely attach the provided wall mounting bracket to the wall using appropriate fasteners for the wall material.
3. Carefully lift and hang the water heater onto the wall mounting bracket.

Image 1: The Rheem Richmond 6EP2-1 Electric Water Heater, showing its compact design suitable for wall mounting.

4.2 Collegamenti idraulici

Connect the water heater to your plumbing system.

1. Install a temperature and pressure relief (T&P) valve into the designated opening on the water heater. The T&P valve port uses a 3/4" NPT thread.
2. Run a discharge pipe from the T&P valve to an open drain, ensuring it is sloped for proper drainage and free of obstructions.
3. Connect the cold water supply line to the inlet port and the hot water outlet line to the outlet port. Both water ports use 1/2" NPT threads.
4. Open the cold water supply valve and allow the tank to fill completely. Open a hot water faucet in your home to purge air from the system until water flows steadily.
5. Ispezionare tutte le connessioni per perdite.

4.3 Collegamento elettrico

The water heater operates on 120 Volts AC and draws approximately 12 Amps (2000 Watt).

1. Ensure the power supply circuit is rated for at least 15 Amps and is properly grounded.
2. Plug the water heater's 3-prong power cord into a dedicated 120V grounded electrical outlet.
3. Do not apply power until the tank is completely filled with water.

4.4 Impostazione della temperatura

The thermostat on this model requires a screwdriver for adjustment.

1. Ensure power is disconnected before attempting to adjust the thermostat.
2. Locate and remove the metal cover on the unit to access the thermostat.
3. Adjust the thermostat to your desired temperature. A setting around 107°F (42°C) is often suitable for point-of-use applications.
4. Replace the metal cover securely before restoring power.

5. Funzionamento

Once installed and filled with water, the water heater will begin heating automatically when power is supplied.

• After initial power-up, allow sufficient time for the water to reach the set temperature.
• The unit will maintain the water temperature automatically.
• Hot water will be available at the connected faucet.

6. Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e prolunga la durata dello scaldabagno.

6.1 Svuotamento del serbatoio

This model features a drain valve, which is useful for draining the tank, especially in cold climates to prevent freezing if the unit is to be shut down for an extended period.

1. Disconnect power to the water heater.
2. Close the cold water supply valve to the unit.
3. Aprire un rubinetto dell'acqua calda in casa per ridurre la pressione e far entrare aria nel sistema.
4. Connect a hose to the drain valve located at the bottom of the water heater and direct it to a suitable drain.
5. Aprire la valvola di scarico e lasciare che il serbatoio si svuoti completamente.
6. Una volta svuotato, chiudere la valvola di scarico e il rubinetto dell'acqua calda.

6.2 Flushing the Tank

While larger water heaters benefit from regular flushing to remove sediment, smaller point-of-use tanks typically experience less sediment buildup due to constant water circulation. However, if you notice reduced hot water output or unusual noises, flushing may be beneficial. Follow the draining procedure (Section 6.1) and then briefly open the cold water supply valve with the drain valve open to flush out any potential sediment before refilling.

6.3 T&P Valve Inspection

Periodically inspect the temperature and pressure relief (T&P) valve and its discharge pipe for any signs of leakage or corrosion. Test the T&P valve annually by lifting the lever briefly to ensure it operates freely and water flows from the discharge pipe.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

The Rheem Richmond 6EP2-1 Electric Water Heater comes with a Garanzia limitata di 6 anno on the tank and parts.

For warranty claims, technical support, or service inquiries, please contact the manufacturer directly. Retain your proof of purchase for warranty validation.

Produttore: Rheem / Richmond

Websito: www.rheem.com (or refer to product packaging for specific contact information)