HJC HJ-09 Flat Anti-Fog Shield Instruction Manual

1. Prodotto finitoview

The HJC HJ-09 Flat Anti-Fog Shield is designed as a replacement or upgrade for compatible HJC motorcycle helmets. This shield features an anti-fog coating to maintain clear visibility during various riding conditions. It is equipped with "TO Posts" for tear-off film application, enhancing its utility for racing or demanding environments.

This shield is intended for use with HJC helmets that are DOT approved and FMVSS 218 certified, ensuring compatibility with helmets designed for legal on-road motorcycle use in the United States.

Caratteristiche principali:

HJ-09 Flat Shield Design: Provides a clear, unobstructed view.
Anti-Fog Coating: Reduces fogging for improved visibility in humid or cold conditions.
TO Posts: Integrated posts for attaching tear-off films (tear-offs sold separately).
Compatibilità: Designed for specific HJC helmet models. Refer to your helmet's manual for shield compatibility.

2. Istruzioni per l'installazione

Proper installation of your HJC HJ-09 Flat Anti-Fog Shield is crucial for safety and performance. Always refer to your specific HJC helmet's owner's manual for detailed shield removal and installation procedures, as mechanisms may vary slightly between helmet models.

Passaggi generali di installazione:

Prepara il tuo casco: Place your helmet on a stable, flat surface. Ensure the helmet is clean and free of debris around the shield mechanism.
Remove Old Shield (if applicable):
- Open the existing shield to its fully open position.
- Locate the shield release mechanisms on both sides of the helmet. These are typically levers, buttons, or tabs.
- Activate the release mechanism on one side and gently pull the shield away from the helmet. Repeat for the other side.
- Carefully remove the old shield, ensuring not to damage the helmet's shield base plates.
Install New HJ-09 Shield:
- Align the pivot points of the new HJ-09 shield with the shield base plates on your helmet. Ensure the anti-fog side is facing inwards.
- Gently press the shield into place until you hear or feel a click, indicating it is securely seated. Some systems may require you to push a lever back into position.
- Ripetere l'operazione sull'altro lato.
Verifica installazione:
- Once installed, slowly open and close the shield several times to ensure it operates smoothly and latches securely in the closed position.
- Check that there are no gaps between the shield and the helmet's eyeport gasket when closed.

HJC HJ-09 Flat Anti-Fog Shield installed on a motorcycle helmet

Image 1: HJC HJ-09 Flat Anti-Fog Shield. This image shows the clear shield, highlighting its flat design and anti-fog properties. The TO posts are visible on the sides.

3. Operating the Anti-Fog Shield

The HJC HJ-09 Flat Anti-Fog Shield is designed to reduce fogging, particularly in cooler temperatures or high humidity. The anti-fog properties are integrated into the shield material or applied as a coating.

Maximizing Anti-Fog Performance:

Ventilazione adeguata: Ensure your helmet's ventilation systems are open to allow airflow, which helps to dissipate moisture and maintain the anti-fog effect.
Avoid Touching Inner Surface: Do not touch or wipe the inner surface of the shield, as this can damage the anti-fog coating.
Tear-Offs (Optional): If using tear-offs on the exterior, ensure they are applied correctly to avoid obstructing vision or interfering with shield operation.

4. Manutenzione e cura

Proper maintenance extends the life and effectiveness of your HJC HJ-09 Flat Anti-Fog Shield. Always handle the shield with care to prevent scratches or damage to the anti-fog coating.

Istruzioni per la pulizia:

Pulizia esterna:
- Use a soft, clean cloth (microfiber is recommended) and lukewarm water with a mild soap (e.g., baby shampooh).
- Gently wipe the exterior surface to remove dirt, bugs, and road grime.
- Rinse thoroughly with clean water and air dry, or gently blot with a clean, soft cloth.
- Avoid abrasive cleaners, paper towels, or harsh chemicals, as these can scratch the shield or damage coatings.
Interior (Anti-Fog) Cleaning:
- The anti-fog coating on the interior surface is delicate. Avoid wiping it unless absolutely necessary.
- If cleaning is required, gently dab with a very soft, damp cloth. Do not rub or use any cleaning agents on the interior.
- Lasciare asciugare completamente all'aria.

Magazzinaggio:

When not in use, store the shield in a protective bag or within the helmet to prevent scratches.
Conservare in luogo fresco e asciutto, al riparo dalla luce solare diretta e da temperature estreme.

5. Risoluzione Dei Problemi

This section addresses common issues you might encounter with your HJC HJ-09 Flat Anti-Fog Shield.

Problema	Possibile causa	Soluzione
Shield fogs up excessively.	Insufficient helmet ventilation. Anti-fog coating compromised. Extreme temperature/humidity conditions.	Ensure all helmet vents are open. Avoid touching the inner surface. If coating is damaged, replacement may be necessary. Consider using a breath guard or additional anti-fog inserts for extreme conditions.
Shield does not close properly or has gaps.	Installazione non corretta. Debris in shield mechanism. Damaged shield base plates on helmet.	Re-install the shield, ensuring it clicks securely into place on both sides. Clean the shield mechanism area on the helmet. Inspect helmet base plates for damage; contact HJC support if damaged.
Scratches or reduced clarity.	Improper cleaning methods. Abrasive contact during storage or use.	Follow recommended cleaning procedures. Store shield in a protective bag. Replace shield if clarity is significantly impaired.

6. Specifiche

Caratteristica	Dettaglio
Marca	Marchio HJC
Nome del modello	HJ-09 Flat Shield with TO Posts
Numero di parte	19-015
Colore	Anti-Fog Clear
Caratteristica speciale	Fog Control
Dimensioni articolo (L x P x A)	5.5 x 10.5 x 0.1 pollici
Peso dell'articolo	7.68 once
Usi consigliati	Motociclismo
Tipo di sport	Sport motoristici

7. Garanzia e supporto

For specific warranty information regarding your HJC HJ-09 Flat Anti-Fog Shield, please refer to the documentation included with your purchase or visit the official HJC websito. I termini di garanzia coprono in genere i difetti di fabbricazione.

For technical support, product inquiries, or to purchase replacement parts, please contact HJC customer service directly or visit their official brand store:

HJC Official Store: Negozio HJC su Amazon

	Manuale d'uso del casco da moto HJC i100 - Sicurezza, caratteristiche e manutenzione Manuale d'uso completo per il casco da moto HJC i100, che include informazioni su sicurezza, vestibilità, manutenzione, funzionamento e garanzia. Scopri le sue caratteristiche avanzate come la calotta in policarbonato, la ventilazione ACS e la visiera parasole integrata.
	Manuale d'uso del casco da moto HJC RPHA 71 - Caratteristiche e istruzioni Manuale d'uso completo per il casco da moto HJC RPHA 71, che descrive in dettaglio caratteristiche come la calotta PIM EVO, la ventilazione ACS, la visiera HJ-40, il parasole HJ-V12 e le guide di installazione/rimozione per vari componenti.
	Manuale d'uso e specifiche del casco da moto HJC RPHA 91 Manuale d'uso completo per il casco modulare da moto HJC RPHA 91, che comprende caratteristiche, specifiche, installazione, rimozione e avvertenze di sicurezza.
	Manuale d'uso del casco da moto HJC C71: guida alla sicurezza, alle caratteristiche e alla cura Manuale d'uso completo per il casco da moto HJC C71. Scopri di più su sicurezza, vestibilità, manutenzione, caratteristiche come la calotta APC e la visiera HJ-34P, e informazioni sulla garanzia HJC.
	Manuale d'uso del casco HJC C10 Manuale d'uso completo per il casco HJC C10, che comprende informazioni sulla sicurezza, la scelta, l'uso, la manutenzione e la garanzia.
	Manuale d'uso del casco da moto HJC i80 \| Sicurezza, caratteristiche e manutenzione Manuale d'uso completo per il casco da moto HJC i80, che include informazioni sulla sicurezza, caratteristiche, utilizzo corretto, manutenzione e parti di ricambio. Include supporto multilingue e istruzioni dettagliate.

Casco HJC HJ-09