TITAN 1/2 HP Mid-Duty Garbage Disposal System

Introduzione

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new TITAN 1/2 HP Mid-Duty Food Waste Disposer. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

Informazioni sulla sicurezza

AVVERTIMENTO: Improper installation or operation can lead to personal injury or property damage. Always disconnect power before servicing or installing the unit.

• Leggere attentamente tutte le istruzioni prima dell'installazione e dell'uso.
• Indossare occhiali di sicurezza durante l'installazione.
• Prima dell'installazione o della manutenzione, assicurarsi che l'alimentazione elettrica sia scollegata dall'interruttore automatico.
• Do not insert hands or foreign objects into the disposal opening.
• Far scorrere sempre acqua fredda quando si utilizza lo smaltimento.

Configurazione e installazione

The TITAN 1/2 HP Mid-Duty Food Waste Disposer features a standard 3-bolt mounting system for straightforward installation and replacement. It is designed to replace most garbage disposal brands using similar 3-bolt mounting systems.

Componenti inclusi:

• Food Waste Disposer Unit
• Paraspruzzi rimovibile
• Flangia Lavello In Acciaio Inox
• Tappo
• Cavo di alimentazione (allegato)
• Drain Outlet Elbow and Elbow Screws
• Flangia a gomito

Fasi di installazione:

1. Preparare l'apertura del lavandino: Ensure the sink opening is clean and free of debris. If replacing an old disposal, remove the existing unit and mounting assembly.
2. Installare la flangia del lavandino: Apply plumber's putty around the underside of the stainless steel sink flange and press it firmly into the sink drain opening.
3. Assemblare l'anello di montaggio: From underneath the sink, slide the fiber gasket, backup flange, and mounting ring onto the sink flange. Secure with the snap ring. Tighten the three mounting screws evenly to create a watertight seal.
4. Connect Dishwasher Drain (if applicable): If connecting a dishwasher, remove the knockout plug from the dishwasher inlet on the disposal unit. Secure the dishwasher hose to the inlet using a hose clamp.
5. Attach Disposal Unit: Align the three mounting tabs on the disposal unit with the mounting ring. Lift and twist the disposal unit clockwise until it locks into place. Use pliers or a specialized wrench to ensure a secure lock.
6. Connect Drain Plumbing: Attach the drain outlet elbow to the disposal unit using the provided elbow flange and screws. Connect the elbow to your existing household drain plumbing. Ensure all connections are tight to prevent leaks.
7. Connetti alimentazione: The unit comes with an attached 120V power cord. Plug the disposal into a grounded outlet.
8. Test per perdite: Run cold water into the sink and check all connections for leaks.

Figure 1: TITAN Garbage Disposal with Labeled Components

Figura 2: Componenti di installazione inclusi

Figura 3: Tipica installazione sottolavello

Istruzioni per l'uso

The TITAN garbage disposal is a continuous feed unit, allowing food waste to be added while it is running.

1. Aprire il rubinetto dell'acqua fredda con un flusso moderato.
2. Flip the disposal switch to the ON position.
3. Scrape food waste into the disposal opening. The Torque Master grinding system, with its stainless steel impellers, efficiently grinds coffee grounds, vegetable scraps, peelings, and small bones into fine particles.
4. Lasciare in funzione lo smaltimento finché non saranno stati eliminati tutti i residui di cibo e non si sentirà più solo il rumore dell'acqua e del motore.
5. Turn off the disposal, then turn off the cold water after a few seconds to flush the drain line.

Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e longevità del vostro tritarifiuti.

• Pulizia: The removable rubber splash guard baffle can be easily removed for cleaning. Clean it regularly to prevent odor buildup.
• Controllo degli odori: To help control odors, grind citrus peels (lemon, orange) or a small amount of ice cubes with cold water.
• Evitare il grasso: Non versare grasso o olio nello smaltimento rifiuti, poiché potrebbero solidificarsi e intasare i tubi.

Risoluzione dei problemi

If your disposal is not operating correctly, refer to the following common issues and solutions:

• Smaltimento non avviato:
         a. Check if the unit is plugged in securely.
         b. Press the red reset button located on the front bottom of the disposal unit (see Figure 1).
         c. Check your household circuit breaker.
• Ronzio ma non rumore:
         a. This indicates an object is jammed in the grinding chamber. Turn off the disposal and disconnect power.
         b. Use a flashlight to look into the drain opening. If an object is visible, remove it with tongs or pliers. Non usare mai la mano.
         c. If no object is visible, use the provided hex wrench (or a 1/4 inch hex wrench) to insert into the center hole on the bottom of the disposal and turn it back and forth to free the impellers.
• Perdite:
         a. Check all plumbing connections for tightness.
         b. Inspect the sink flange for proper sealing; re-tighten mounting screws if necessary.

Specifiche

Figura 4: Dimensioni del prodotto

Garanzia

The TITAN 1/2 HP Mid-Duty Garbage Disposal System comes with a Garanzia di 5 anno. During the warranty period, a defective or inoperative disposer will be replaced by the manufacturer at no charge to the consumer/purchaser. An original sales receipt is required for warranty claims. Costs of service labor for installation will be the consumer’s responsibility.

Supporto

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact TITAN customer support. Refer to your product packaging or the official TITAN websito per informazioni di contatto aggiornate.