1. Prodotto finitoview
The JET BDB-1340A Belt Drive Bench Lathe is a precision machine designed for metalworking applications. It features an enclosed gearbox with helical cut gears for reduced noise and smooth operation. This model includes a sturdy stand for stability and comes equipped with various accessories to facilitate a wide range of machining tasks.
Key features include a full-length splash guard for protection, a quick-change gearbox for efficient threading, and precision tapered roller bearings supporting the spindle for consistent performance.
Figure 1: JET BDB-1340A Belt Drive Bench Lathe with Stand.
2. Configurazione e installazione
2.1 Disimballaggio e ispezione
Carefully unpack all components and inspect for any shipping damage. Ensure all listed components are present. The lathe and stand are heavy; use appropriate lifting equipment and techniques to prevent injury.
2.2 Assembly of Stand and Lathe
The CBS-1340A metal stand is designed to provide a stable base for the lathe. Assemble the stand according to the separate stand instructions, ensuring all fasteners are securely tightened. Once the stand is assembled, carefully lift and position the lathe onto the stand, aligning mounting holes. Secure the lathe to the stand using the provided hardware.
2.3 Collegamento elettrico
This lathe requires a 230V, 1-phase power supply. Ensure the electrical connection is performed by a qualified electrician and complies with all local electrical codes. The machine features low voltage motor controls for safety.
2.4 Livellamento
After positioning the lathe, use a precision level to ensure the machine bed is perfectly level. Adjust the leveling feet on the stand as necessary to achieve optimal accuracy during operation.
Figure 2: Overall Dimensions of the Lathe (71" L x 32" W x 45" H).
3. Istruzioni per l'uso
3.1 Controls and Components Overview
Familiarize yourself with the main controls and components of the lathe before operation.
Figure 3: Key Components of the BDB-1340A Lathe.
- Spindle Speed Control: Adjust the spindle speed using the levers on the headstock. The lathe offers 12 spindle speeds ranging from 60 to 1,240 RPM.
- Mandrini: The lathe comes with a 6-inch 3-jaw direct mount scroll chuck with top reversing jaws and an 8-inch 4-jaw independent chuck. Select the appropriate chuck for your workpiece and secure it to the D1-4 spindle mount.
- Four-Way Tool Post: Mount cutting tools securely in the four-way tool post on the compound slide.
- Carriage Mounted Spindle Control Lever: This lever allows for convenient control of the spindle rotation from the carriage position.
- Full-Length Splash Guard: Provides protection from chips and coolant during operation.
Figure 4: Headstock and Spindle Area.
3.2 Montaggio del pezzo in lavorazione
Securely mount the workpiece in the chosen chuck. For longer workpieces, utilize the steady rest or follow rest for additional support. The steady rest has a capacity of 2-5/8 inches, and the follow rest has a capacity of 2-3/4 inches.
Figure 5: Chuck and Steady Rest in Use.
3.3 Feeding and Threading
The lathe features independent leadscrew and feed rod for precise control. Automatic feeding and threading functions are fully interlocked for safety and ease of use. The quick-change gearbox allows for fast and easy gear changes for both inch (40 threads, 4 to 112 TPI) and metric (27 threads, 0.2 to 6) threading.
Figure 6: Carriage and Control Area.
3.4 Taper Turning
The tailstock may be offset for turning tapers, and it includes an inch/metric graduated quill for precise adjustments.
4. Manutenzione
Regular maintenance is crucial for the longevity and optimal performance of your JET lathe.
- Pulizia: After each use, clean the machine thoroughly, especially the bedways, cross slide, and compound slide, to remove chips and coolant residue. The full-length splash guard helps contain debris.
- Lubrificazione: Refer to the lubrication chart (if available in the physical manual) for recommended lubrication points and intervals. Proper lubrication ensures smooth operation of moving parts and prevents premature wear.
- Ispezione: Periodically inspect all belts, gears, and electrical connections for wear or damage. Ensure all fasteners are tight.
- Manutenzione del mandrino: Keep chuck jaws clean and lubricated. Store chucks properly when not in use.
5. Risoluzione Dei Problemi
This section provides general guidance for common issues. For complex problems, contact authorized service personnel.
- La macchina non si avvia:
- Check the main power connection and ensure the 230V supply is active.
- Verificare che il pulsante di arresto di emergenza non sia premuto.
- Controllare che gli interruttori automatici non siano scattati o che i fusibili siano bruciati.
- Rumore o vibrazioni eccessivi:
- Ensure the machine is properly leveled.
- Controllare che non vi siano componenti allentati o cuscinetti usurati.
- Verify that the workpiece is securely mounted and balanced.
- Tagli imprecisi:
- Check for play in the slides (cross slide, compound slide) and adjust gibs if necessary.
- Ensure cutting tools are sharp and properly aligned.
- Verify that the tailstock is correctly aligned for non-tapered work.
6. Specifiche
| Parametro | Valore |
|---|---|
| Dondolarsi sul letto | 13 pollici |
| Swing over cross slide | 7-25/32 pollici |
| Swing through gap | 18-3/4 pollici |
| Length of gap | 8 pollici |
| Distanza tra i centri | 40 pollici |
| Spindle bore | 1-3/8 pollici |
| Spindle mount | D1-4 |
| Spindle taper with sleeve | MT-5 (MT-3) |
| Velocità del mandrino | 12; 60 to 1,240 RPM |
| Longitudinal feeds | 40; 0.0018 to 0.0374 IPR |
| Range of cross feeds | 0.0012 to 0.0345 IPR |
| Inch threads | 40; 4 to 112 TPI |
| Filettature metriche | 27; 0.2 to 6 |
| Dimensione massima dell'utensile | 5/8 x 5/8 pollici |
| Compound slide travel | 2-11/16 pollici |
| Cross slide travel | 6-5/16 pollici |
| Viaggio in carrozza | 35 pollici |
| Tailstock spindle travel | 3-3/4 pollici |
| Taper in tailstock spindle | MT-3 |
| Steady rest capacity | 2-5/8 pollici |
| Follow rest capacity | 2-3/4 pollici |
| Width of bed | 7-3/8 pollici |
| Dimensioni d'ingombro (LxWxH) | 71 x 32 x 45 pollici (con supporto) |
| Motore | 2 HP, 1Ph, 230-volt only |
| Peso | 1,175 libbre |
6.1 Standard Equipment Included
- Vassoio del liquido refrigerante
- 6-inch 3-jaw direct mount scroll chuck with top reversing jaws
- 8-inch 4-jaw independent chuck
- 12-inch faceplate
- Four-way tool post
- Riposo stabile
- Follow rest
- Metric change gear
- Centers with headstock center sleeve
- Threading dial
- Micro Carriage Bed Stop
- Full Length Splash Guard
- Tolerance test certificate
- Tool box with tools
- CBS-1340A Stand
7. Garanzia
The JET BDB-1340A Belt Drive Bench Lathe is backed by an industry-leading JET Two-Year WarrantyLa presente garanzia copre i difetti di materiali e di fabbricazione in normali condizioni di utilizzo e manutenzione.
Figura 7: Garanzia JET di 2 anni.
For warranty service or repair, please contact one of JET's Authorized Service Centers located throughout the United States. These centers can assist with warranty repairs, parts acquisition, and routine maintenance.
8. Assistenza clienti
For technical assistance, parts inquiries, or any questions regarding the operation and maintenance of your JET BDB-1340A Lathe, please contact JET customer support. Professional manuals are available to ensure optimal functioning and operation of your equipment.
