Prodotto finitoview
The PROFORM 67650 Vehicle Scale System Kit is engineered for accurate weight measurement of vehicles. This system comprises four individual scale pads and a central display unit, designed for ease of use and precise readings. Each scale pad has a capacity of 1,250 lbs.
Figure 1: The PROFORM 67650 Vehicle Scale System Kit includes four individual scale pads and a central display unit, all connected by cables. This comprehensive kit is designed for precise vehicle weight measurement.
Istruzioni di installazione
- Disimballare i componenti: Carefully remove all components from the packaging, including the main display unit, four scale pads, and connecting cables.
- Installa le batterie: Locate the battery compartment on the back of the main display unit. Insert the required batteries. Ensure correct polarity.
- Connect Scale Pads: Connect each of the four scale pads to the main display unit using the provided cables. Ensure all connections are secure.
- Posizionamento: Place the four scale pads on a flat, level surface where the vehicle will be weighed. Ensure sufficient space around each pad for vehicle tires.
- Accensione iniziale: Press the power button on the main display unit to turn on the system. The display should illuminate and show initial readings.
Istruzioni per l'uso
This section details the basic operation of your PROFORM 67650 Vehicle Scale System.
- Accensione/spegnimento: Premere il tasto Energia pulsante (simbolo: cerchio con linea verticale) to turn the unit on. Press and hold the same button to turn the unit off.
- Funzione di retroilluminazione: Premere il tasto Retroilluminazione pulsante (symbol: sun icon) to activate or deactivate the display backlight for improved visibility in various lighting conditions.
- Conversione dell'unità: Utilizzare il Function (Fn) button to cycle between measurement units, typically pounds (lb) and kilograms (kg).
- Funzione tara: IL Tara pulsante (symbol: circle with diagonal line) allows you to zero out the current weight, useful for subtracting the weight of a container or fixture.
- Weighing a Vehicle:
- Ensure all scale pads are properly connected and the unit is powered on.
- Carefully drive or push the vehicle onto the scale pads, ensuring each tire rests fully on a pad.
- Allow the readings to stabilize on the main display unit. The display will show individual wheel weights and total vehicle weight.
Manutenzione
- Sostituzione della batteria: When the battery indicator on the display shows low power, replace all batteries in the main display unit. Use fresh, high-quality batteries for optimal performance.
- Pulizia: To clean the scale pads and display unit, wipe them with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which may damage the surfaces or electronic components.
- Magazzinaggio: Store the scale system in a dry, clean environment away from extreme temperatures and direct sunlight. Disconnect all cables and, if storing for an extended period, remove the batteries from the display unit to prevent leakage.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Unit does not power on after being turned off. | Internal power state issue or battery contact. | Remove all batteries from the main display unit, wait 10 seconds, then reinsert them. This should reset the unit and allow it to power on. If the issue persists, replace with new batteries. |
| Inaccurate or no weight readings. | Loose cable connections, uneven surface, or overloaded scale. |
|
| Il display è scuro o tremolante. | Batteria scarica. | Replace all batteries in the main display unit. |
Specifiche
- Modello: 67650
- Marca: ProForm
- Produttore: Proform
- Peso dell'articolo: 44 libbre (sistema totale)
- Dimensioni del prodotto: 23.5 x 13.2 x 13.9 inches (overall system dimensions)
- Dimensioni della confezione: 34.544 H x 59.69 L x 33.782 W (centimetri)
- Peso del pacco: 45.4 libbre
- Capacity Per Scale Pad: 1,250 libbre.
- Tipo di vestibilità: Specifico del veicolo
- Caratteristiche speciali: Backlit Display, Large Display
- Paese di origine: Cina
Garanzia e supporto
Specific warranty details for the PROFORM 67650 Vehicle Scale System Kit are not provided in this manual. For warranty information, technical support, or service inquiries, please contact the manufacturer directly or refer to the product packaging and official ProForm websito.
