Tamiya 1/24 Audi Quattro Model Kit Instruction Manual

1. Introduzione e oltreview

This manual provides detailed instructions for the assembly and care of your Tamiya 1/24 Audi Quattro model kit (Model 24031). This kit allows you to build a highly detailed static display model of the iconic Audi Quattro sports car. Please read all instructions carefully before beginning assembly.

2. Informazioni sulla sicurezza

• Piccole parti: Questo kit contiene piccole parti che potrebbero rappresentare un rischio di soffocamento. Tenere fuori dalla portata dei bambini piccoli.
• Strumenti affilati: Assembly requires the use of sharp tools such as hobby knives and nippers. Exercise extreme caution to prevent injury.
• Adesivi e vernici: Use model adhesives and paints in a well-ventilated area. Refer to the specific product labels for safety warnings and instructions.
• Protezione degli occhi: Consider wearing eye protection during assembly, especially when cutting or sanding parts.

3. Contenuto della confezione

Prima di iniziare il montaggio, verifica che tutti i componenti siano presenti. Il kit dovrebbe includere:

• Plastic parts molded on sprues (various colors)
• Clear plastic parts (windows, lights)
• Pneumatici in gomma
• Foglio di decalcomanie
• Metal axles and screws (if applicable)
• Libretto di istruzioni

4. Assemblaggio

Follow the step-by-step diagrams in the included instruction booklet. The general assembly process involves:

1. Preparazione: Carefully remove parts from the sprues using nippers. Trim any excess plastic (flash) with a hobby knife or file.
2. Prova di montaggio: Always test fit parts before applying adhesive to ensure proper alignment.
3. Applicazione adesiva: Apply a small amount of model adhesive to the joining surfaces. Hold parts together until the adhesive sets.
4. Pittura: Paint parts according to the color guide in the instruction booklet. Allow paint to dry completely between coats and before handling.
5. Applicazione della decalcomania: Apply decals to painted surfaces as indicated. Use water to slide decals into position and a soft cloth to remove excess water and air bubbles.
6. Assemblaggio finale: Assemble larger sub-assemblies (chassis, interior, body) and attach wheels, clear parts, and other details.

Image 1: The box art for the Tamiya 1/24 Audi Quattro model kit, showcasing the finished model car.

5. Handling and Display

Once assembled, your Tamiya 1/24 Audi Quattro is a static display model. To ensure its longevity and appearance:

• Handle the model by its sturdy parts, such as the chassis or main body, to avoid damaging delicate details.
• Display the model in a stable location where it is not prone to being knocked over.
• Avoid direct sunlight, which can cause paint fading and decal deterioration over time.
• Protect the model from extreme temperature fluctuations and high humidity.

6. Manutenzione

Regular, gentle maintenance will keep your model looking its best:

• Spolverare: Gently dust the model regularly with a soft, dry brush (such as a makeup brush) or a microfiber cloth to prevent dust buildup.
• Pulizia: Per lo sporco più ostinato, strofinare leggermenteampen a soft cloth with plain water. Avoid using harsh chemical cleaners, solvents, or abrasive materials, as these can damage paint and plastic.
• Magazzinaggio: If storing the model for an extended period, place it in a sealed display case or box to protect it from dust and environmental factors.

7. Risoluzione dei problemi comuni di assemblaggio

• Parti non adatte: Double-check the instruction diagrams to ensure correct part orientation. Inspect parts for any remaining plastic flash or mold lines that might obstruct fit. Gently sand or trim as needed.
• Argentatura delle decalcomanie: If decals appear to have air trapped underneath (silvering), ensure the surface was glossy before application. Use a decal setting solution to help the decal conform to surface details and eliminate air.
• Imperfezioni della vernice: Ensure surfaces are clean and free of dust before painting. Apply paint in thin, even coats rather than one thick coat to avoid runs or uneven texture. Allow adequate drying time between coats.
• Parti mancanti: Carefully re-check the sprues and packaging. If a part is genuinely missing, contact Tamiya customer support with your kit details.

8. Specifiche

9. Garanzia e supporto

Warranty information for Tamiya model kits is typically provided within the kit packaging or on the manufacturer's official website. For specific warranty details or technical support regarding your Tamiya 1/24 Audi Quattro model kit, please refer to the official Tamiya websito o contattare direttamente il servizio clienti.

Spesso puoi trovare informazioni di contatto e FAQ sul sito ufficiale del produttore websito: www.tamiya.com