Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.
Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Informazioni sulla sicurezza
- Chiudere sempre l'alimentazione principale dell'acqua prima di installare o eseguire la manutenzione del rubinetto.
- Durante l'installazione, indossare dispositivi di protezione individuale adeguati, come occhiali di sicurezza.
- In caso di dubbi su qualsiasi fase del processo di installazione, consultare un idraulico qualificato.
- Assicurarsi che tutti i collegamenti siano ben saldi per evitare perdite.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Lavatory Faucet Assembly
- Hardware di montaggio
- Matching Pop-Up Drain Assembly
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | KB3605BL |
| Tipo di finitura | Bronzo strofinato ad olio |
| Materiale | Ottone |
| Tipo di montaggio | Montaggio sul ponte |
| Tipo di installazione | Centrotavola |
| Conteggio dei fori | 3 |
| Numero di maniglie | 2 |
| Portata del becco | 4 pollici |
| Altezza del becco | 3.5 pollici |
| Spazio libero per il beccuccio | 2 pollici |
| Portata massima | 1.8 Gallons Per Minute (6.8 Liters Per Minute) |
| Tipo di cartuccia | Dura Seal Washerless |
| Caratteristica speciale | Pop Up Drain Included |
Image: Dimensional drawing providing precise measurements for installation.
Configurazione e installazione
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Preparare il lavandino: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Installare il corpo del rubinetto: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Collegare le linee di alimentazione idrica: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Install the Pop-Up Drain: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Test per perdite: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.
Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Operazione
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- Acqua fredda: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Acqua calda: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Controllo della temperatura: Regolare contemporaneamente le manopole dell'acqua calda e fredda per ottenere la temperatura desiderata.
- Portata: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Piletta di scarico a scomparsa: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Manutenzione
Proper care will maintain the finish and performance of your faucet:
- Pulizia: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish.
- Manutenzione dell'aeratore: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Prevenzione delle perdite: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Basso flusso d'acqua | Clogged aerator; partially closed supply valves. | Clean aerator; ensure supply valves are fully open. |
| Il rubinetto perde dal beccuccio | Cartuccia usurata. | Sostituire la cartuccia. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Problemi di temperatura dell'acqua | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Informazioni sulla garanzia
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass websito.
Supporto
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's websito o sulla confezione del prodotto.
Per maggiori informazioni, visita il Negozio di ottone di Kingston.
