Introduzione
The MONACOR LP-200-8 is a passive stereo level control designed for integration with loudspeaker systems. It allows for precise attenuation of audio signals, ensuring optimal listening levels and system balance. This unit features a durable flat front panel and an intuitive rotary knob for user-friendly operation.
Prodotto finitoview
Davanti view of the MONACOR LP-200-8 Level Control, showing the black square front panel with 'AUDIO LEVEL' and 'MIN.' markings, and the central black control knob.
Caratteristiche principali:
- Stereo level control for loudspeakers.
- Includes a flat front panel and rotary knob for easy integration and adjustment.
- Designed for 8 Ohm impedance systems.
- Capable of handling peak power up to 15W.
- Attenuation adjustable from 0dB to full attenuation.
Configurazione e installazione
The LP-200-8 is designed for panel mounting and integration into existing audio systems. Ensure all power to the amplifier and speakers is disconnected before proceeding with installation.
Istruzioni di cablaggio:
- Identificare le connessioni: The level control has input and output terminals for left and right stereo channels. Refer to the wiring diagram provided with your specific audio setup for correct terminal identification.
- Collegare Amplifier Uscita: Connect the speaker output terminals from your amplifier to the input terminals of the LP-200-8 level control. Ensure correct polarity (+ to + and - to -) for both left and right channels.
- Connect Speaker Input: Connect the output terminals of the LP-200-8 level control to your 8 Ohm loudspeakers. Again, observe correct polarity for both channels.
- Montaggio: Secure the level control to a suitable panel or enclosure using appropriate fasteners. Ensure the knob can rotate freely without obstruction.
Importante: This unit is designed for 8 Ohm impedance. Using it with speakers of different impedance may affect performance or cause damage to the unit or connected equipment. Do not exceed the maximum peak power rating of 15W.
Istruzioni per l'uso
Once installed, the MONACOR LP-200-8 provides simple and effective audio level adjustment.
- Accensione: Accendi il tuo amplificatore e sorgente audio.
- Regolazione del livello: Rotate the control knob to adjust the audio output level.
- Attenuation Direction: Turning the knob counter-clockwise will decrease the audio level (attenuate), moving towards the "MIN." position. Turning it clockwise will increase the audio level.
- Allineare: The control offers a full 300° rotation angle, allowing for fine adjustments from 0dB (maximum volume) down to full attenuation (minimum volume).
Manutenzione
The MONACOR LP-200-8 Level Control requires minimal maintenance. Follow these guidelines to ensure longevity:
- Pulizia: Use a soft, dry cloth to wipe the front panel and knob. Avoid abrasive cleaners or solvents, which may damage the finish.
- Ambiente: Ensure the unit is installed in a dry environment, away from excessive heat, humidity, or direct sunlight.
- Connessioni: Controllare periodicamente tutti i collegamenti elettrici per accertarsi che siano saldi e privi di corrosione.
Risoluzione dei problemi
If you experience issues with your LP-200-8 Level Control, consider the following common troubleshooting steps:
- Nessun suono:
- Ensure the level control knob is not set to the minimum ("MIN.") position.
- Verificare che tutti i collegamenti elettrici siano sicuri e correttamente polarizzati.
- Controllare il amplifier and audio source for proper operation.
- Suono distorto:
- Ensure the impedance of your speakers matches the 8 Ohm rating of the level control.
- Confirm that the peak power of your amplifier does not exceed 15W, or that the volume is not set too high, causing clipping.
- Inspect wiring for any shorts or loose strands.
- Suono intermittente:
- Check for loose connections at the level control terminals, amplifier e altoparlanti.
- Ensure the unit is not exposed to excessive vibration.
If problems persist after attempting these steps, consult a qualified audio technician.
Specifiche
| Numero modello: | 12.0620 |
| Marca: | MONACO |
| Tipo: | Stereo Level Control for Loudspeakers |
| Impedenza: | 8Ohm±25% |
| Gestione della potenza di picco: | 15W MASSIMO |
| Attenuation Direction: | Counter-clockwise (decrease level) |
| Turning Angle: | 300° ± 5° |
| Intervallo di attenuazione: | 0dB to full attenuation |
| Canali: | Stereo |
| Dimensioni della confezione: | Dimensioni: 9.4 x 5.8 x 5 cm |
| Peso dell'articolo: | 9.07 grammi |
| Paese di produzione: | Taiwan |
| Tipo di montaggio: | Montaggio a pannello |
Garanzia e supporto
For information regarding warranty coverage, technical support, or service, please refer to the official MONACOR webo contattare il rivenditore autorizzato. Conservare la ricevuta d'acquisto come prova d'acquisto.
Risorse online: www.monacor.com
