Introduzione
This manual provides detailed instructions for the setup, operation, and maintenance of your Westclox Plasma LED Alarm Clock, Model 70014. Designed for convenience and functionality, this digital alarm clock features a clear LED display, USB-C charging, and a battery backup system. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your device.
Figura 1: Fronte view of the Westclox Plasma LED Alarm Clock.
Caratteristiche principali
- Display di facile lettura: Features large, bold red LED numbers for high visibility from a distance.
- Loud Alarm with Snooze Function: Equipped with a loud alarm suitable for heavy sleepers and a convenient snooze button for temporary silence.
- Customizable Brightness Settings: Offers three dimmer levels (Bright, Medium, Dim) to adjust display brightness for comfortable viewin qualsiasi condizione di illuminazione.
- Porta di ricarica USB-C: Includes a built-in USB Type-C port for charging smartphones or other compatible devices.
- Batteria di backup: Requires 1 AAA battery (not included) to retain time settings during power outages.
- Design moderno e compatto: Sleek black case designed to blend seamlessly with various room decors.
Impostare
1. Collegamento elettrico
- Connect the included USB-C cable to the "POWER IN" port on the back of the alarm clock.
- Plug the other end of the USB-C cable into a compatible USB power adapter (not included) and then into a wall outlet. The display will illuminate.
2. Installazione della batteria (per backup)
- Individuare il vano batterie sul lato inferiore dell'orologio.
- Open the compartment and insert 1 AAA battery (not included), ensuring correct polarity (+/-).
- Close the battery compartment. This battery will maintain time settings during power interruptions.
Figura 2: Posteriore view with control buttons and USB ports.
Istruzioni per l'uso
1. Impostazione dell'ora
- Press and hold the "TIME SET" button (located on the back or top, refer to Figure 2). The hour digits will begin to flash.
- Use the "HOUR" button to adjust the hour. Pay attention to the PM indicator light.
- Press the "TIME SET" button again. The minute digits will flash.
- Use the "MINUTE" button to adjust the minutes.
- Press the "TIME SET" button one more time to confirm and exit time setting mode.
2. Impostazione dell'allarme
- Press and hold the "ALARM SET" button (located on the back or top, refer to Figure 2). The alarm hour digits will begin to flash.
- Use the "HOUR" button to adjust the alarm hour. Ensure the correct AM/PM is selected.
- Press the "ALARM SET" button again. The alarm minute digits will flash.
- Use the "MINUTE" button to adjust the alarm minutes.
- Press the "ALARM SET" button one more time to confirm and exit alarm setting mode.
- To activate the alarm, slide the "ALARM ON/OFF" switch to the "ON" position. An alarm indicator light will appear on the display.
3. Funzione snooze
When the alarm sounds, press the large "SNOOZE" button on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.
Figura 3: in alto view evidenziando il pulsante Snooze.
4. Dimmer del display
The clock features three display brightness levels: Bright, Medium, and Dim. To adjust the brightness, locate the "DIMMER" switch or button (refer to Figure 2) and cycle through the options until your desired brightness is achieved.
5. Ricarica USB
The clock includes a USB Type-C "CHARGE OUT" port. Connect your smartphone or other compatible device to this port using its charging cable to utilize the clock as a charging station.
Figure 4: USB-C charging port in use.
Video 1: Official product video demonstrating Westclox LED Alarm Clock features.
Manutenzione
- Pulizia: Use a soft, dry cloth to clean the exterior of the clock. Avoid abrasive cleaners or solvents.
- Sostituzione della batteria: Replace the AAA backup battery annually or if you notice time discrepancies during power outages.
- Magazzinaggio: If storing the clock for an extended period, remove the backup battery to prevent leakage.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il display è vuoto | Nessun potere o potere outage. | Ensure USB-C cable is securely connected to a working power adapter and outlet. Check if backup battery is installed and functional. |
| L'allarme non suona | L'allarme non è attivato o è impostato in modo errato. | Verify the "ALARM ON/OFF" switch is in the "ON" position. Re-check alarm time settings. |
| Il display è troppo luminoso/scuro | L'impostazione del dimmer non è corretta. | Adjust the "DIMMER" switch/button to cycle through brightness levels. |
| L'ora è errata dopo lo spegnimentotage | La batteria di backup è mancante o scarica. | Install a fresh AAA battery for backup. Reset the time if necessary. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Westclox |
| Numero di modello | 70014 |
| Colore | Nero |
| Tipo di visualizzazione | LED digitale (rosso) |
| Dimensioni dello schermo | 0.9-Inch (digit height) |
| Fonte di alimentazione | Electrical (USB-C cable included, adapter not included) |
| Batteria di backup | Batteria 1 AAA (non inclusa) |
| Caratteristiche speciali | Alarm, Snooze, 3-Level Dimmer, USB-C Charge Out Port |
| Materiale | Plastica |
| Peso dell'articolo | 7.84 once |
| Tipo di montaggio | Da tavolo |
Garanzia e supporto
This Westclox Plasma LED Alarm Clock comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in the product packaging or visit the official Westclox websito. Conserva la ricevuta d'acquisto come prova d'acquisto.
Per ulteriori informazioni o assistenza, puoi visitare il sito Westclox Store on Amazon.
