BEMIS 1055 Commercial Open Front Elongated Plastic Toilet Seat

Introduzione

This manual provides essential information for the installation, use, and maintenance of your BEMIS 1055 Commercial Open Front Elongated Plastic Toilet Seat. Designed for heavy-duty commercial applications, this seat offers durability and ease of cleaning. Please read these instructions thoroughly before proceeding with installation or use.

Caratteristiche del prodotto

• Open Front Design: Provides enhanced hygiene and ease of use in commercial settings.
• Costruzione in plastica resistente: Made from commercial-grade plastic engineered to resist chips, wear, and stains, ensuring long-lasting performance.
• Non-Corrosive Hardware: Features 300 series stainless steel posts and pintles, washers, and nuts for superior resistance to corrosion.
• Elongated Fit: Universally designed to fit all elongated toilet bowls, including popular brands like Kohler, American Standard, and TOTO.
• Prodotto negli USA: Manufactured in Sheboygan Falls, Wisconsin, USA, utilizing environmentally friendly materials and processes.

Key features of the BEMIS 1055 toilet seat, including non-corrosive hardware, heavy-duty plastic, and quick installation.

Measuring for Your Toilet Seat

Before installation, it is crucial to determine if your toilet bowl requires a round or elongated seat. The BEMIS 1055 is designed specifically for elongated bowls. Use a tape measure to verify your toilet bowl size.

Istruzioni per la misurazione:

1. Locate the two mounting holes at the back of your toilet bowl.
2. Measure the distance from the center of these mounting holes to the very front edge of the toilet bowl.
3. An elongated toilet bowl typically measures approximately 18.5 inches (47 cm) from the mounting holes to the front rim. A round bowl measures approximately 16.5 inches (42 cm).

Visual guide for measuring an elongated toilet seat, showing a length of 18.06 inches and a width of 14.44 inches.

Configurazione e installazione

The BEMIS 1055 toilet seat is designed for straightforward installation. The package includes the toilet seat and all necessary hardware.

Fasi di installazione:

1. Remove your old toilet seat by unscrewing the nuts from the bolts located underneath the back of the toilet bowl.
2. Position the new BEMIS 1055 seat over the mounting holes on the toilet bowl.
3. Insert the provided bolts through the seat hinges and into the toilet bowl holes.
4. From underneath the toilet bowl, hand-tighten the washers and nuts onto the bolts.
5. Ensure the seat is properly aligned and then fully tighten the nuts with a wrench. Do not overtighten to avoid damaging the toilet or hardware.

Lato view of the BEMIS 1055 toilet seat, showing the durable plastic construction and stainless steel mounting hardware.

Top-down view of the BEMIS 1055 toilet seat, illustrating the open front design.

Istruzioni per l'uso

The BEMIS 1055 toilet seat operates as a standard toilet seat. Simply raise or lower the seat as needed. The open-front design is intended for commercial and public restrooms to promote hygiene and ease of access.

Manutenzione e pulizia

To maintain the appearance and longevity of your BEMIS toilet seat, regular cleaning is recommended. The durable plastic material is easy to clean and resistant to common bathroom stains.

Linee guida per la pulizia:

• Use gentle cleaners such as mild dish soap, hand soap, or antibacterial wipes.
• Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the seat's finish.
• Wipe the seat clean with a soft cloth or sponge.
• Risciacquare abbondantemente con acqua e asciugare con un panno morbido per evitare macchie d'acqua.

Illustration of cleaning a toilet seat with a gentle wipe to maintain its color and finish.

Risoluzione dei problemi

Most issues with toilet seats are related to installation or general wear. Here are some common concerns:

• Seat Wobbles: If the seat feels loose or wobbles, check the mounting nuts underneath the toilet bowl. Tighten them securely, but do not overtighten. Ensure the bolts are properly seated in the toilet holes.
• Il sedile non è adatto: Verify that your toilet bowl is indeed elongated (approximately 18.5 inches from mounting holes to front rim). This seat is not compatible with round toilet bowls. Refer to the "Measuring for Your Toilet Seat" section.
• Macchie o scolorimento: Ensure you are using only gentle, non-abrasive cleaners as outlined in the "Maintenance and Cleaning" section. Harsh chemicals can cause permanent damage.

Specifiche

Informazioni sulla garanzia

Bemis Manufacturing Company provides a manufacturer's warranty that covers purchases made by US and Canada customers for a period of 1 year from the date of purchase. Please retain your proof of purchase for warranty claims.

Supporto e contatti

For further assistance, product inquiries, or to report any issues, please visit the official Bemis website or contact their customer service department. Refer to the packaging or the official Bemis websito per le informazioni di contatto più aggiornate.

Bemis: Innovation for Everyday Life.