Manuale utente del distributore di acqua calda e fredda Clover B7A

1. Introduzione

This manual provides essential information for the safe and efficient operation of your Clover B7A Hot and Cold Water Dispenser. Please read all instructions carefully before installation and use. This high-quality water cooler is designed to provide refreshing chilled drinking water or piping hot water for various uses in your home or office.

Immagine: Frontale view of the Clover B7A Hot and Cold Water Dispenser with a 5-gallon water bottle installed on top. The dispenser is white with red and blue spigots for hot and cold water, respectively.

2. Informazioni sulla sicurezza

• Assicurarsi sempre che il distributore sia posizionato su una superficie stabile e piana.
• Tenere il dispenser lontano dalla luce solare diretta e da fonti di calore.
• Garantire un'adeguata ventilazione attorno all'unità.
• The hot water spigot features a child safety lock. To dispense hot water, you must engage the safety mechanism before pressing the lever.
• Do not plug in the unit until a water bottle is properly installed and water has filled the internal tanks.
• Scollegare il distributore prima di pulirlo o di effettuare qualsiasi intervento di manutenzione.

3. Configurazione e installazione

1. Disimballaggio: Estrarre con cautela il dispenser dalla confezione. Verificare che non vi siano danni.
2. Posizionamento: Position the dispenser on a flat, sturdy surface near a grounded electrical outlet. Ensure there is adequate space around the unit for ventilation.
3. Pulizia: Before first use, wipe down the exterior of the dispenser with a soft, damp cloth. Clean the removable drip tray.
4. Installazione della bottiglia d'acqua:
   • Rimuovere il sigillo protettivo da una bottiglia d'acqua standard da 5 galloni.
   • Carefully invert the water bottle and place it firmly onto the bottle support collar at the top of the dispenser. Ensure the bottle is seated correctly and the probe pierces the bottle cap.
   • Wait a few minutes for the internal tanks to fill with water. You may hear bubbling sounds as the tanks fill.
5. Collegamento elettrico: Once the water tanks are filled (bubbling stops), plug the power cord into a grounded 110-120 volt electrical outlet.
6. Attiva riscaldamento/raffreddamento: Locate the power switches for hot and cold water on the back of the unit. Flip them to the 'ON' position to activate the heating and cooling functions. Allow approximately 15-30 minutes for the water to reach optimal temperatures.

4. Istruzioni per l'uso

• Erogazione Acqua Fredda: Place your cup under the blue spigot. Push the blue lever to dispense chilled water.
• Erogazione Acqua Calda: Place your cup under the red spigot. Engage the child safety lock (usually by sliding a button or pressing a tab) and then push the red lever to dispense hot water. Exercise caution as the water is very hot (approximately 185°F).
• Adjustable Cold Water Thermostat: The cold water temperature can be adjusted between 35.6°F and 53.6°F using the thermostat control located on the back of the unit.

5 Caratteristiche

• Stainless Steel Tanks: Both hot and cold water tanks are constructed of hygienic stainless steel, designed for contaminant resistance and health protection.
• Regolazione della temperatura: Cold water temperature is adjustable (35.6°F-53.6°F). Hot water temperature is automatically controlled to approximately 185°F (non-adjustable).
• Valutazione Energy Star: Meets strict energy-efficiency guidelines set by the EPA and U.S. Department of Energy.
• Efficient Heating and Cooling: Features an ultra-efficient condenser cooled via convection, operating quietly.
• Durable Faucets: Equipped with durable polypropylene, self-closing spigots.
• Vassoio raccogligocce rimovibile: One-piece ABS drip tray is removable for easy cleaning.
• Safety Float Mechanism: Double float valve with secondary safety float mechanism helps reduce water loss from spilling.

6. Manutenzione e pulizia

• Pulizia esterna: Regularly wipe the exterior surfaces with a soft, damp stoffa. Evitare detergenti abrasivi.
• Pulizia del vassoio raccogli gocce: The removable drip tray should be emptied and cleaned regularly (e.g., weekly or bi-weekly, depending on usage) to prevent water overflow and maintain hygiene. Simply pull it out, empty, wash with mild soap and water, rinse, and snap back into place.
• Decalcificazione: Over time, mineral deposits may accumulate, especially in the hot water tank, potentially slowing water flow. The manufacturer recommends descaling the unit periodically. Refer to general descaling instructions for water dispensers or coffee makers, using appropriate descaling solutions. Always unplug the unit and drain all water before descaling.

7. Risoluzione Dei Problemi

• Niente acqua calda/fredda:
  • Check if the hot/cold power switches on the back of the unit are in the 'ON' position.
  • Ensure the unit is plugged into a working electrical outlet.
  • Verify that the water bottle is not empty and is properly seated.
  • Allow sufficient time (15-30 minutes) for the water to heat or cool after initial setup or bottle change.
• Flusso d'acqua lento:
  • Ensure the water bottle is not empty.
  • Mineral buildup can restrict water flow, especially for hot water. Refer to the descaling instructions in the Maintenance section.
• Perdita d'acqua:
  • Check if the water bottle is properly seated on the dispenser.
  • Inspect the water bottle for cracks or damage.
  • Ensure the drip tray is correctly installed and not overflowing.

8. Specifiche

9. Garanzia e supporto

The Clover B7A Hot and Cold Water Dispenser comes with a Garanzia limitata del produttore di 1 anno.

For technical support, warranty claims, or further assistance, please contact CLOVER customer service. Refer to the product packaging or the official CLOVER websito per informazioni di contatto aggiornate.