SKB Cases 1SKB-PS-8 Powered Pedalboard User Manual

Introduzione

This manual provides essential information for the proper setup, operation, and maintenance of your SKB Cases 1SKB-PS-8 Powered Pedalboard. The 1SKB-PS-8 is designed to provide a durable, rigid, and lightweight platform for guitar effect pedals, featuring built-in 9VDC output jacks for convenient power distribution.

Per garantire un funzionamento sicuro ed efficiente, leggere attentamente il presente manuale prima di utilizzare il prodotto.

Caratteristiche del prodotto

Powers up to 8 pedals.
Injection molded from eco-friendly rubber modified styrene for durability and light weight.
Heavy-duty 19 x 12 inch hook and loop mounting surface for secure pedal placement.
Includes an external transformer rated at 1.0A total current.
Comes with all necessary cables for powering popular pedals.
Heavy-duty ballistic nylon carry bag with an exterior zipper pocket and adjustable shoulder strap for portability.

Guida all'installazione

Disimballaggio e ispezione

Carefully remove the pedalboard and its accessories from the packaging. Inspect all components for any signs of damage that may have occurred during shipping. If any damage is found, contact your retailer immediately.

Identificazione dei componenti

1SKB-PS-8 Pedalboard: The main platform with integrated power jacks.
Trasformatore esterno: Power supply unit for the pedalboard.
Cavi di alimentazione: Cables to connect your pedals to the pedalboard's power outputs.
Chiusura a strappo: Strips for securing pedals to the board.
Borsa per il trasporto: Ballistic nylon bag for transport.

SKB 1SKB-PS-8 Powered Pedalboard with multiple guitar pedals attached

Figure 1: The SKB 1SKB-PS-8 Powered Pedalboard with various effect pedals connected. This image illustrates the pedalboard's capacity and layout when in use.

Fissaggio dei pedali

Ensure the pedalboard is disconnected from power.
Apply the provided hook and loop fastener strips to the bottom of your effect pedals and the surface of the pedalboard.
Arrange your pedals on the 19" x 12" hook and loop surface according to your desired signal chain and ergonomic preference.
Press down firmly on each pedal to ensure a secure attachment to the pedalboard.

Superiore view of the empty SKB 1SKB-PS-8 Powered Pedalboard

Figura 2: in alto view of the SKB 1SKB-PS-8 Powered Pedalboard, showing the hook and loop surface and the eight 9VDC output jacks along the top edge.

Powering Your Pedals

Connect the external transformer to the power input jack on the pedalboard.
Plug the external transformer into a standard AC wall outlet.
Using the provided power cables, connect each of your 9VDC compatible effect pedals to one of the eight 9VDC output jacks on the pedalboard. Ensure correct polarity.
Connect your guitar and amplifier to your pedal chain as usual.

Istruzioni per l'uso

Once all pedals are securely attached and powered, the 1SKB-PS-8 pedalboard functions as a central power hub for your effects. There is no on/off switch directly on the pedalboard; power is supplied as long as the external transformer is plugged into an active AC outlet and connected to the pedalboard.

Signal Chain Management

The pedalboard provides a stable platform for your effects. Manage your signal chain by connecting pedals with instrument cables in the desired order. The integrated power supply simplifies cable management by eliminating the need for individual power adapters for each pedal.

Manutenzione

Pulizia

To clean the pedalboard, disconnect it from all power sources and remove all pedals. Use a soft, dry cloth to wipe down the surface. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using abrasive cleaners or solvents.

Stoccaggio e trasporto

When not in use or for transport, utilize the included ballistic nylon carry bag. This bag protects the pedalboard and its contents from dust, scratches, and minor impacts.

Figure 3: The heavy-duty ballistic nylon carry bag included with the SKB 1SKB-PS-8 Pedalboard, designed for convenient and protected transport.

Store the pedalboard in a cool, dry place away from direct sunlight and extreme temperatures.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
Nessuna potenza ai pedali.	External transformer not plugged in. Presa a muro difettosa. Loose connection between transformer and pedalboard. Faulty power cable to pedal.	Assicurarsi che il trasformatore sia collegato saldamente a una presa di corrente. Provare la presa a muro con un altro dispositivo. Controllare tutti i collegamenti di alimentazione. Try a different power cable for the pedal.
Humming or noise from pedals.	Problemi di ground loop. Interferenza da altri dispositivi elettronici. Pedal power requirements exceed 1.0A total current.	Ensure all equipment is on the same electrical circuit if possible. Move the pedalboard away from sources of electromagnetic interference. Verify the current draw of all connected pedals does not exceed the 1.0A total current rating. Consider using an isolated power supply for high-current pedals if necessary.
Pedals not securely attached.	Insufficient hook and loop contact. Worn hook and loop material.	Ensure sufficient hook and loop material is applied to both pedal and board. Press pedals firmly onto the board. Replace worn hook and loop material if necessary.

Specifiche

Numero di modello	1SKB-PS-8
Dimensions (Hook and Loop Surface)	19 pollici x 12 pollici (circa 48.26 cm x 30.48 cm)
Jack di uscita	8 x 9VDC outputs
Total Current Rating	1.0 A (1000 mA)
Materiale da costruzione	Injection-molded rubber modified styrene
Accessori inclusi	External transformer, power cables, hook and loop fastener, ballistic nylon carry bag
Peso dell'articolo	7.4 libbre (circa 3.36 kg)
Colore	Nero

Garanzia e supporto

For detailed warranty information and customer support, please refer to the official SKB Cases website or contact SKB Cases directly. Keep your purchase receipt as proof of purchase for any warranty claims.

SKB Cases Contact Information:

Websito: www.skbcases.com
Assistenza clienti: Fare riferimento al website for current contact methods.

	Manual de Utilizare UPS Power Safe Lite și Power Safe Plus Ghid complet pentru utilizarea și întreținerea UPS-urilor SKB Power Safe Lite (59.6317.70) și Power Safe Plus (59.6317.75), inclusiv specificații tehnice, instrucțiuni de siguranță și ghid de eliminare.
	SKB Military & Industrial Cases: Dimensions and Specifications Catalog Explore the comprehensive SKB catalog of military and industrial protective cases, featuring detailed dimensions, weights, and specifications for injection molded, roto, shock rack, and weapon cases. Valid from Feb 01 to June 30, 2013.
	Tabella delle dimensioni e specifiche delle custodie protettive SKB serie R Tabella dettagliata delle dimensioni e specifiche delle custodie protettive SKB serie R, che evidenzia la protezione superiore, le caratteristiche e i modelli disponibili con dimensioni e kit opzionali. Include dettagli sul prodotto e informazioni di contatto.
	Partitioning and Transmutation: Current Developments 2004 - SKB Technical Report TR-04-15 This 2004 technical report from SKB's reference group details current developments in Partitioning and Transmutation (P&T) of nuclear waste. It covers research, systems, challenges, and prospects for managing long-lived radionuclides.
	Nuclear Data for Accelerator-Driven Transmutation: Annual Report 2001/2002 This annual report details research on nuclear data for accelerator-driven transmutation, covering experimental setups, results, and international collaborations from 2001-2002. It highlights work conducted at Uppsala University for SKB.
	TheGigRig GENX8 High Current DC Power Supply Manual User manual for TheGigRig GENX8, an 8-output isolated DC power supply designed for guitar pedalboards. This document details the product's features, specifications, setup examples, cable connection instructions, FAQs, and warranty information.

SKB 1SKB-PS-8