Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Leviton SSJ7-40 1-Gang 1-Receptacle Stainless Steel Midway Size Wallplate. Designed for durability and a clean aesthetic, this wallplate is suitable for various residential and commercial applications, covering a single 1.406-inch diameter locking/straight blade type receptacle.
The SSJ7-40 features a brushed stainless steel finish, offering a non-magnetic and robust solution for your electrical installations. It is UL and CSA approved, ensuring compliance with safety standards.
Informazioni sulla sicurezza
AVVERTIMENTO: To avoid fire, shock, or death, always turn off power at the circuit breaker or fuse box before wiring or servicing. This product must be installed in accordance with national and local electrical codes.
- Assicurarsi che l'alimentazione sia scollegata prima dell'installazione.
- In caso di dubbi su qualsiasi parte di queste istruzioni, consultare un elettricista qualificato.
- Do not use this wallplate for applications other than its intended purpose.
- Inspect the wallplate for any damage before installation. Do not install damaged products.
Contenuto della confezione
- Leviton SSJ7-40 1-Gang 1-Receptacle Stainless Steel Wallplate
- Mounting Screws (typically two, matching the wallplate finish)
Configurazione e installazione
Follow these steps to properly install your Leviton SSJ7-40 wallplate:
- Spegnimento dell'alimentazione: Locate the circuit breaker or fuse that controls the power to the receptacle where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltagetester.
- Remove Old Wallplate (if applicable): Carefully unscrew and remove the existing wallplate.
-
Prepare the Wallplate: The Leviton SSJ7-40 wallplate may come with a protective blue film to prevent scratches during shipping and installation. Gently peel off this film from the front surface of the wallplate before mounting.
Image: Leviton SSJ7-40 wallplate showing the blue protective film that needs to be removed before installation.
Image: A hand gently peeling off the blue protective film from the corner of the stainless steel wallplate.
-
Posizionare la piastra a muro: Align the new Leviton SSJ7-40 wallplate over the receptacle, ensuring the opening perfectly matches the device.
Image: The Leviton SSJ7-40 wallplate, ready for installation over a single receptacle.
- Fissare la piastra a muro: Insert the provided mounting screws into the designated holes on the wallplate and carefully tighten them with a screwdriver. Do not overtighten, as this can damage the wallplate or the receptacle.
- Ripristina alimentazione: Once the wallplate is securely installed, turn the power back on at the circuit breaker or fuse box.
Istruzioni per l'uso
The Leviton SSJ7-40 wallplate functions as a protective and aesthetic cover for a single 1.406-inch diameter locking/straight blade type receptacle. Once installed, it requires no further operation. Its purpose is to safely enclose the electrical wiring and provide a finished appearance.
Manutenzione
Per preservare l'aspetto e l'integrità della placca in acciaio inossidabile:
- Pulizia: Pulire la superficie con un panno morbido, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the brushed stainless steel finish.
- Ispezione: Periodically check the wallplate for any signs of damage, loosening, or discoloration. If any issues are found, ensure power is off before inspecting further or replacing.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Wallplate does not fit flush. | Receptacle not properly seated in the electrical box, or mounting screws are overtightened/uneven. | Ensure power is off. Loosen receptacle mounting screws, adjust receptacle position, then re-tighten. Re-install wallplate, ensuring screws are tightened evenly but not excessively. |
| Scratches or marks on the wallplate. | Protective film not removed, or abrasive cleaning materials used. | If protective film is still present, carefully peel it off. For existing scratches, consider replacement for aesthetic reasons. Use only soft cloths and mild cleaners for maintenance. |
| Wallplate appears loose. | Le viti di montaggio sono allentate. | Ensure power is off. Gently tighten the mounting screws until the wallplate is secure. Do not overtighten. |
Specifiche
| Numero di modello | SSJ7-40 |
| Configurazione | 1-Gang, 1-Receptacle (1.406-inch diameter hole) |
| Materiale | Acciaio inossidabile 302 |
| Tipo di finitura | Acciaio inossidabile spazzolato |
| Colore | Non-Magnetic Stainless Steel |
| Designated Size | A metà strada |
| Dimensioni (prodotto) | 6.63 x 4.13 x 0.25 pollici (circa) |
| Peso dell'articolo | 2.11 once |
| Approvazioni | UL, CSA |
| Tipo di installazione | Avvitare |
Informazioni sulla garanzia
This Leviton product is covered by a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the documentation included with your purchase or visit the official Leviton websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
Supporto
For technical assistance, product inquiries, or further support, please contact Leviton customer service. You can find contact information and additional resources on the official Leviton websito:
When contacting support, please have your product model number (SSJ7-40) available.
