1. Introduzione
This manual provides detailed instructions for installing the Scosche HA1710B Double DIN Radio Install Dash Kit. This kit is designed to facilitate the installation of an aftermarket car stereo into select 2001-05 Honda Civic vehicles, providing a factory-like appearance.
Please read all instructions carefully before beginning the installation process. Ensure all necessary tools and components are available.
2. Compatibilità
This dash kit is compatible with select Honda Civic 2001-05 models. It is not compatible with Civic Si modelli.
For specific compatibility, refer to the fit guide image below. This kit is designed for Double DIN installations only.
Image: Fit Guide for Scosche HA1710B Dash Kit. This guide illustrates vehicle compatibility, specifically noting that the kit works with 2001-05 Honda Civic DX, LX, and EX models, but is not for use with Civic Si models. It also indicates that it is for Double DIN installations only.
Scosche Double DIN Kits accommodate True Double DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Some radios labeled as Double DIN may be oversized, potentially requiring minor trimming of the kit for a proper fit.
Image: Industry Standard Sized Opening. This diagram provides the dimensions for the stereo opening in the dash kit, which are 96.8mm (3-13/16 inches) in height and 173mm (6-13/16 inches) in width. This is for reference to ensure your aftermarket stereo will fit.
3. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:
- Radio Bezel (Dash Kit)
- Manuale di istruzioni
- Staffe di montaggio (sinistra e destra)
- Hardware (screws, clips)
Image: Scosche HA1710B Dash Kit. This image displays the primary dash kit bezel, which frames the aftermarket stereo.
Immagine: Angolata view of the Scosche HA1710B Dash Kit. This perspective highlights the design and mounting tabs of the dash kit bezel.
Image: Car Stereo Dash Kit Components. This image shows the dash kit along with representations of a wire harness and antenna adapter, noting that the latter two are sold separately.
4. Informazioni sulla sicurezza
- Prima di iniziare qualsiasi intervento elettrico, scollegare sempre il terminale negativo della batteria del veicolo per evitare cortocircuiti e scosse elettriche.
- Indossare dispositivi di protezione individuale adeguati, come occhiali di sicurezza.
- Assicurarsi che il veicolo sia parcheggiato su una superficie piana e con il freno di stazionamento inserito.
- Refer to your vehicle's service manual for specific instructions on removing factory components.
- If you are unsure about any step, consult a qualified professional installer.
5. Installazione
Il seguente video fornisce una panoramica completaview of the installation process, from preparation to final testing. Detailed steps are also provided below.
Video: Scosche Stereo Installation. This video demonstrates the general process of installing a Scosche stereo kit, including disconnecting the battery, preparing the dash kit components by removing unnecessary tabs, installing the new stereo into the dash kit, removing the factory stereo, making wiring connections, plugging in harnesses, installing the new stereo into the dash, reconnecting the battery, and testing the radio.
5.1. Preparazione
- Scollegare la batteria: Disconnect the negative battery terminal of your vehicle.
- Review Istruzioni: Read through the entire instruction manual provided with the dash kit and your new stereo.
- Identify Tabs: Dopo il reviewing the instructions, identify and remove any tabs on the dash kit components that are not required for your specific application.
5.2. Rimozione della radio di fabbrica
- Rimuovere i pannelli di rivestimento: Using a panel removal tool, carefully pry off and remove any trim panels surrounding your factory stereo.
- Svitare la radio di fabbrica: Individuare e svitare le viti di montaggio che tengono in posizione la radio di fabbrica.
- Scollegare i cablaggi: Estrarre delicatamente la radio di fabbrica e scollegare tutti i cablaggi elettrici e i cavi dell'antenna dal retro.
5.3. Collegamenti elettrici
Connect the aftermarket stereo's wiring harness to the vehicle's wiring harness. Match wire colors according to the instructions provided with your aftermarket stereo and the Scosche wiring adapter (if purchased separately).
- Use splice connectors or solder connections for secure and reliable electrical contact.
- Ensure all connections are properly insulated with electrical tape or heat shrink tubing.
- Some wires, such as amplifier turn-on, parking brake sense, and steering wheel control connections, may require specific routing or additional adapters not included in this kit.
5.4. Dash Kit Assembly
- Fissare le staffe: Secure the left and right mounting brackets to your new aftermarket stereo using the screws provided with the stereo.
- Insert Stereo: Slide the assembled stereo and brackets into the dash kit bezel.
5.5. New Stereo Installation
- Collegare il cablaggio: Plug the vehicle's wiring harness into the aftermarket stereo's harness. Connect the antenna cable.
- Montaggio stereo: Carefully slide the new stereo assembly into the dashboard opening. Secure it with the factory mounting screws.
- Reinstallare la finitura: Riattaccare tutti i pannelli di rivestimento rimossi, assicurandosi che scattino saldamente in posizione.
5.6. Passaggi finali
- Ricollegare la batteria: Ricollegare il terminale negativo della batteria.
- Funzioni di test: Turn on the vehicle and test all functions of the new stereo, including audio, radio, and any connected accessories.
6. Funzionamento
This dash kit provides the mounting solution for your aftermarket stereo. For detailed operating instructions of your new stereo, please refer to the instruction manual provided by the stereo manufacturer.
7. Manutenzione
- Controllare periodicamente che le viti di montaggio siano ben serrate.
- Clean the dash kit and stereo faceplate with a soft, damp panno. Evitare prodotti chimici aggressivi o detergenti abrasivi.
- Ensure no debris accumulates around the stereo or in the dash opening.
8. Risoluzione Dei Problemi
- Stereo does not power on:
- Controllare i collegamenti della batteria.
- Verify all wiring harness connections are secure and correct.
- Check the stereo's fuse.
- Poor fit of stereo in dash kit:
- Ensure all unnecessary tabs on the dash kit were removed.
- Confirm your aftermarket stereo's dimensions are within the kit's specifications (96.8mm x 173mm). Minor trimming may be required for oversized units.
- Verify factory radio brackets are used as required.
- Dash kit does not fit vehicle:
- Double-check vehicle compatibility (2001-05 Honda Civic, non-Si models).
- Ensure all factory components were removed correctly.
9. Specifiche
| Numero di modello | HA1710B |
| Dimensioni del prodotto | 1.5 x 6.5 x 13.25 pollici |
| Peso dell'articolo | 1.6 once |
| Colore | Nero |
| Materiale | OEM Quality Materials (ABS Plastic) |
| Compatibilità | Select 2001-05 Honda Civic (DX, LX, EX models) |
| Stereo Type | Double DIN (Max faceplate opening: 96.8mm x 173mm) |
10. Garanzia e supporto
The Scosche HA1710B Dash Kit is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support.
For technical assistance or warranty claims, please contact Scosche customer support directly. Refer to the official Scosche websito o sulla confezione del prodotto per informazioni di contatto.
