Manuale di istruzioni per scaldasalviette Brookstone

1. Introduzione

Grazie per l'acquistoasing the Brookstone Towel Warmer. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new appliance. Please read all instructions carefully before use and retain this manual for future reference.

2. Informazioni importanti sulla sicurezza

Per ridurre il rischio di incendi, scosse elettriche o lesioni, seguire sempre le precauzioni di sicurezza di base quando si utilizzano apparecchi elettrici.

• Leggere tutte le istruzioni prima di utilizzare questo apparecchio.
• Do not use this appliance near water, such as bathtubs, showers, or swimming pools.
• Always unplug the appliance from the electrical outlet when not in use or before cleaning.
• Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner.
• Tenere il cavo lontano da superfici calde.
• Do not insert any object into any opening.
• Non utilizzare all'aperto.
• Non operare in luoghi in cui vengono utilizzati prodotti aerosol (spray) o in cui viene somministrato ossigeno.
• Questo apparecchio è destinato esclusivamente all'uso domestico.
• Close supervision is necessary when this appliance is used by or near children or individuals with disabilities.
• The surface of the warmer will become hot during operation. Avoid direct contact with heated surfaces.

3. Prodotto finitoview

The Brookstone Towel Warmer is designed to provide warm towels, bathrobes, or blankets for a luxurious experience. Its extra-large capacity can accommodate up to two oversized towels.

This image displays the Brookstone Towel Warmer in its packaging. The main unit is a white cylindrical warmer with a clear lid, designed to heat towels. A hand is shown placing a towel into the warmer. To the left, a stack of neatly folded towels in various shades of grey and beige is visible, suggesting the product's use.

Caratteristiche principali:

• Holds and warms 2 oversized towels.
• Also suitable for blankets and bathrobes.
• Warms to approximately 120°F (49°C) in just 10 minutes.
• Dispone di spegnimento automatico per motivi di sicurezza.
• Transparent lid allows visibility of contents.

4. Impostazione

The Brookstone Towel Warmer requires minimal setup.

1. Disimballare: Estrarre con cautela lo scaldasalviette dalla confezione.
2. Posizionamento: Place the unit on a flat, stable, heat-resistant surface away from water sources.
3. Collegare: Collegare il cavo di alimentazione a una presa elettrica standard da 120 V CA.

5. Istruzioni per l'uso

Follow these steps to warm your towels:

1. Preparare l'articolo: Open the lid and place one or two dry towels, a bathrobe, or a blanket loosely inside the warmer. For best results, unfold the item as much as possible to allow heat to circulate evenly.
2. Chiudi coperchio: Chiudere saldamente il coperchio trasparente.
3. Attivare: Press the power button to start the warming cycle. An indicator light will illuminate.
4. Aspettare: Allow approximately 10 minutes for the item to reach its optimal warm temperature of up to 120°F (49°C).
5. Spegnimento automatico: The unit will automatically shut off after the warming cycle is complete. The indicator light will turn off.
6. Rimuovi elemento: Carefully open the lid and remove your warm item. Be cautious as the item and interior surfaces may be hot.

Note on Initial Use: It is normal for a new heating appliance to emit a slight odor during its first few uses. This will dissipate over time. You may run the warmer empty for a few cycles in a well-ventilated area to help reduce this initial smell.

6. Manutenzione e cura

Proper care will ensure the longevity of your towel warmer.

• Pulizia: Always unplug the unit and allow it to cool completely before cleaning. Wipe the exterior with a soft, damp panno. Non immergere l'unità in acqua o altri liquidi. Non utilizzare detergenti abrasivi o pagliette.
• Magazzinaggio: Quando non in uso, riporre lo scaldasalviette in un luogo fresco e asciutto. Assicurarsi che l'unità sia pulita e asciutta prima di riporla.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

For warranty information or technical support, please contact Brookstone customer service. Keep your purchase receipt as proof of purchase.

For the most up-to-date contact information, please visit the official Brookstone websito o fare riferimento ai recapiti forniti sulla confezione del prodotto.