Manuale utente del catenaccio elettronico Weiser SmartCode 5 (9GED14900-001)

Introduzione

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

Caratteristiche del prodotto

• Accesso senza chiave: Operate the deadbolt using a personalized code on the electronic keypad.
• SmartKey Re-key Technology: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• Sicurezza avanzata: Designed for exterior doors where robust security is essential.
• Costruzione durevole: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Configurazione e installazione

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

Passaggi chiave dell'installazione:

1. Prepare the door and frame according to the provided template.
2. Installare il chiavistello e la piastra di battuta.
3. Installare il gruppo tastiera esterno.
4. Install the interior assembly, ensuring proper cable connection.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Perform the door handing process to calibrate the lock.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

Istruzioni per l'uso

Chiusura della porta:

• From Outside (Keypad): Press the 'Lock' button (the padlock icon) on the keypad.
• From Outside (Key): Insert your key and turn it to lock the deadbolt.
• Dall'interno: Ruotare la manopola sul gruppo interno in posizione di blocco.

Sblocco della porta:

• From Outside (Keypad): Enter your 4-8 digit user code. The deadbolt will retract.
• From Outside (Key): Insert your key and turn it to unlock the deadbolt.
• Dall'interno: Turn the thumb turn on the interior assembly to the unlocked position.

Programmazione Codici Utente:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. Aprire il coperchio della batteria sul gruppo interno.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. Press the 'Lock' button.
5. Immettere un nuovo codice utente composto da 4-8 cifre.
6. Press the 'Lock' button.
7. Test the new user code to ensure it unlocks the door.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

Manutenzione

Sostituzione della batteria:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. Rimuovere il coperchio della batteria dal gruppo interno.
2. Rimuovere le vecchie batterie.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. Riposizionare il coperchio della batteria.

Pulizia:

Per pulire la serratura, utilizzare un panno morbido, damp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

Risoluzione dei problemi

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• Il lucchetto non risponde: Controllare i livelli della batteria e sostituirla se necessario. Assicurarsi che il collegamento dei cavi tra i gruppi esterno e interno sia saldo.
• La tastiera non si illumina: This usually indicates dead batteries. Replace all four AA batteries.
• Il catenaccio non si estende/retrae completamente: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• Codice utente non funzionante: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser websito.

Specifiche

Garanzia e supporto

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser websito o contattare il servizio clienti. Conservare la prova d'acquisto per motivi di garanzia.

Weiser Customer Support: Refer to your product packaging or the official Weiser websito per informazioni di contatto aggiornate.