Manuali+

Orbita 27896

Orbit Easy-Set Logic 6-Station Indoor/Outdoor Sprinkler Timer/Controller

Modello: 27896

Marca: Orbit

1. Introduzione

The Orbit Easy-Set Logic Sprinkler Timer/Controller is designed to provide efficient and automated irrigation for residential sprinkler systems. This manual provides detailed instructions for the installation, programming, and maintenance of your 6-station indoor/outdoor timer.

Orbit Easy-Set Logic 6-Station Sprinkler Timer with cover open

Figure 1: Orbit Easy-Set Logic 6-Station Sprinkler Timer (Front View with Cover Open)

2. Informazioni sulla sicurezza

WARNING: To prevent electrical shock, always disconnect power before installing or servicing the timer.

  • Ensure the timer is installed in a location protected from direct weather exposure if it is an indoor-only model. This model is designed for both indoor and outdoor use.
  • Use only 24 VAC valves compatible with this timer.
  • All wiring should comply with local electrical codes.

3. Contenuto della confezione

Verificare che tutti gli elementi siano presenti:

  • Orbit Easy-Set Logic Sprinkler Timer/Controller (Model 27896)
  • Two keys for the locking door
  • Manuale dell'utente (questo documento)

4. Impostazione

4.1 Montaggio del timer

The timer can be mounted indoors or outdoors. Choose a location near a 120V AC electrical outlet and away from direct sunlight or extreme temperatures. Ensure the location allows for easy access to wiring and programming.

Orbit Sprinkler Timer mounted on a brick wall

Figure 2: Timer Mounted on a Wall

4.2 Cablaggio del timer

The Orbit Easy-Set Logic timer features a swing panel for easy access to wiring terminals. It is compatible with standard 18-gauge sprinkler wire with 5 or 7 strands/wires. The push-wire terminals allow for tool-less insertion and removal of wires.

  1. Connect the common wire from your sprinkler valves to the 'C' terminal. This is typically a white wire.
  2. Connect each zone wire from your sprinkler valves to the numbered station terminals (1-6).
  3. If using a rain/freeze sensor (sold separately), connect it to the designated sensor terminals.
Diagram showing steps to mount and wire the Orbit sprinkler timer

Figure 3: Easy Installation Diagram (Mounting and Wiring)

5. Istruzioni per l'uso

The Easy-Set Logic dial allows for intuitive programming. Rotate the dial to the desired setting and use the arrow buttons to adjust values.

5.1 Setting Clock and Date

  1. Turn the dial to 'SET CLOCK'. Use the arrow buttons to set the current time (AM/PM).
  2. Turn the dial to 'SET DATE'. Use the arrow buttons to set the current year, month, and day.

5.2 Programming Watering Schedules (Programs A, B, C)

The timer allows for up to three independent watering programs (A, B, C). Each program can have up to four start times.

  1. Press the 'PROGRAM' button to select Program A, B, or C.
  2. Turn the dial to 'START TIME'. Set the desired start times for the selected program.
  3. Turn the dial to 'RUN TIME'. Set the watering duration for each station (zone) within the selected program.
  4. Turn the dial to 'HOW OFTEN'. Select the watering frequency (e.g., specific days of the week, odd/even days).
  5. Turn the dial to 'AUTO' to activate the programmed schedule.

5.3 Funzione di ritardo pioggia

The rain delay feature allows you to temporarily suspend watering for a set period (24, 48, or 72 hours) to conserve water during wet weather. Press the 'RAIN DELAY' button repeatedly to select the desired delay period.

5.4 Manual Run

To manually run a specific station or all stations for testing or supplemental watering:

  1. Turn the dial to 'ENTER MANUAL'.
  2. Use the arrow buttons to select the desired station or 'ALL' stations.
  3. Set the desired run time using the arrow buttons. The selected station(s) will begin watering immediately.
Close-up of a sprinkler head watering plants and another watering grass, illustrating underground and drip systems.

Figure 4: Controlling Underground Sprinkler or Drip Systems

6. Manutenzione

  • Regularly check wiring connections for corrosion or damage.
  • Ensure the locking door is kept closed to protect the internal components from weather and debris.
  • The timer features a lithium battery backup to save your programmed settings during power outages. No user maintenance is required for this battery.
A person gardening with a shovel, illustrating peace of mind with automated watering.

Figure 5: Lithium Battery Backup for Program Retention

7. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Il display del timer è vuotoNessuna alimentazione all'unitàControllare la presa di corrente e i collegamenti.
Gli irrigatori non si accendonoIncorrect programming, wiring issues, or rain delay active.Verify program settings, check common and zone wire connections, ensure rain delay is off.
Only some zones waterFaulty wiring to specific zones or valve issues.Inspect wiring for affected zones, test individual valves.

For further assistance, please contact Orbit Customer Service.

8. Specifiche

  • Modello: 27896
  • Marca: Orbita
  • Colore: Grigio
  • Stazioni: 6 (expandable up to 12 zones/stations with compatible Orbit products)
  • Installazione: Interno/Esterno
  • Energia: 120V AC input, 24V AC output
  • Peso: 3.1 libbre (1.41 chilogrammi)
  • Dimensioni della confezione: 9.17 x 8.39 x 4.02 pollici
  • Produttore: Orbit Irrigation
  • Codice UPC: 046878278967

9. Garanzia e supporto

Orbit products are designed for durability and reliability. For technical support, troubleshooting, or warranty inquiries, please contact Orbit Customer Service.

Orbit Customer Service: Numero di parte 1-800-488-6156

Websito: www.orbitanline.com

Documenti correlati - 27896

Preview Manuale d'uso del timer per irrigazione Orbit - Installazione, programmazione e funzionalità
Manuale utente completo per i timer per irrigatori Orbit, che copre l'installazione, la programmazione con Easy-Set Logic™, funzioni aggiuntive come Rain Delay e Water Budgeting, risoluzione dei problemi e specifiche tecniche.
Preview Manuale utente del timer per irrigazione Orbit: Guida alla programmazione Easy-Set Logic
Manuale utente completo per i timer per irrigazione Orbit con Easy-Set Logic. Scopri come installare, programmare e utilizzare funzioni avanzate come Rain Delay e Water Budgeting per un'irrigazione efficiente del prato.
Preview Manuale utente Orbit 57894, 57896, 57899, 57900, 27894, 27896, 27892, 27999, 91894, 91896, 91892, 91899
This user manual provides comprehensive instructions for operating and installing Orbit sprinkler timers, including models 57894, 57896, 57899, 57900, 27894, 27896, 27892, 27999, 91894, 91896, 91892, and 91899. It covers features like Easy-Set Logic™, installation steps, programming, additional features such as rain delay and water budgeting, troubleshooting, and warranty information.
Preview Manuale utente Orbit Timer: Guida all'installazione e alla programmazione
Manuale utente completo per i timer Orbit, che copre l'installazione, la programmazione con Easy-Set Logic™, le funzionalità aggiuntive e la risoluzione dei problemi per i modelli 57894, 57896, 57899, 57900, 27894, 27896, 27892, 27999, 91894, 91896, 91892, 91899.
Preview Timer per irrigazione Orbit 27894: Manuale utente e guida
Guida completa all'installazione, alla programmazione e alla manutenzione del timer per irrigazione a 4 stazioni Orbit 27894. Include la logica Easy-Set, l'irrigazione manuale, il ritardo pioggia e la programmazione a intervalli per una cura efficiente del prato e del giardino.
Preview Manuale utente del timer per irrigazione Orbit: installazione, programmazione e funzionalità
Comprehensive user manual for Orbit sprinkler timers, covering installation, programming with Easy-Set Logic™, additional features like Rain Delay and Water Budgeting, troubleshooting, and specifications. Includes models 57894, 57896, 57899, 57900, 27894, 27896, 27892, 27999, 91894, 91896, 91892, 91899.