Seco-Larm Enforcer SD-9263-KSVQ No Touch Request-to-Exit Plate User Manual

1. Introduzione

The Seco-Larm Enforcer SD-9263-KSVQ is an outdoor-rated, no-touch request-to-exit plate designed for controlled access systems. It utilizes infrared (IR) technology to detect hand waves, activating a door release without physical contact. This unit is ideal for environments requiring high hygiene standards. It also features a mechanical override for emergency or power failure situations.

2. Caratteristiche principali

• No-Touch Activation: Activates with a simple wave of the hand, minimizing contact.
• Adjustable Sensor Range: Detection range can be set from 2 to 7 inches (5 to 18 cm).
• Feedback visivo: A ring illuminator changes color (red to green or green to red, selectable) upon activation.
• Override meccanico: Includes a manual button for door operation, even during power outages.
• Costruzione durevole: Made from stainless steel with an IP65 weatherproof rating for outdoor use.
• Cablaggio semplice: Features a quick-connect screwless terminal block for simplified installation.
• Adjustable Trigger Duration: Output relay trigger duration is adjustable from 0.5 to 20 seconds, or set to toggle mode.

3. Configurazione e installazione

Proper installation is crucial for the optimal performance and longevity of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. This device is designed for door mount applications.

3.1 Contenuto della confezione

• Seco-Larm Enforcer No Touch Request-to-Exit Plate (SD-9263-KSVQ)
• Hardware di montaggio
• Keys for mechanical override

3.2 Montaggio

1. Select a suitable location on the door frame or wall adjacent to the door, ensuring it is within easy reach for users.
2. Use the provided mounting hardware to securely attach the plate. Ensure the plate is level and firmly fixed to prevent movement.
3. Route necessary wiring through the wall or door frame to the quick-connect terminal block on the back of the plate.

3.3 Cablaggio

Connect the plate to your access control system or door strike using the screwless terminal block. Refer to your access control system's manual for specific wiring diagrams. The plate includes a 1A relay output.

• Potenza in ingresso: Connect to a stable power source (typically 12V DC).
• Uscita relè: Connect to the door strike or access control panel's input.
• Terra: Per un funzionamento sicuro, garantire una corretta messa a terra.

Note: All wiring should be performed by a qualified technician in accordance with local electrical codes.

Figura 1: Davanti view of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. It features a brushed stainless steel finish, an illuminated IR sensor with a hand icon, and a mechanical override button. Text on the plate indicates 'WAVE TO OPEN' and 'ENFORCER'.

4. Istruzioni per l'uso

4.1 No-Touch Activation

1. Approach the Seco-Larm Enforcer plate.
2. Wave your hand within the adjustable sensor range (2 to 7 inches) of the IR sensor.
3. The ring illuminator will change color (e.g., from red to green) to indicate successful activation.
4. The door will unlock or open according to the configured trigger duration.

4.2 Mechanical Override

In the event of a power failure or if no-touch activation is not desired, the mechanical override can be used.

1. Locate the manual override button on the plate.
2. Press the button to activate the door release mechanism.

4.3 Adjusting Sensor Range and Trigger Duration

The sensor range and trigger duration can be adjusted via internal potentiometers or dip switches (refer to the detailed wiring diagram provided with the product for exact locations and procedures).

• Gamma del sensore: Adjust to suit the environment, typically between 2 and 7 inches. Avoid setting it too sensitive in high-traffic areas to prevent false activations.
• Durata attivazione: Set the time the relay remains active (0.5 to 20 seconds) or select toggle mode for continuous activation until a second wave.

5. Manutenzione

The Seco-Larm Enforcer No Touch Request-to-Exit Plate requires minimal maintenance due to its durable stainless steel construction and IP65 rating.

• Pulizia: Periodically wipe the surface with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or sensor.
• Ispezione: Regularly check for any signs of physical damage or loose connections. Ensure the mounting remains secure.
• Prestazioni del sensore: Test the no-touch activation periodically to ensure the sensor is functioning correctly and its range is appropriate for the environment.

6. Risoluzione Dei Problemi

If you encounter issues with your Seco-Larm Enforcer No Touch Request-to-Exit Plate, refer to the following common problems and solutions:

7. Specifiche

• Modello: SD-9263-KSVQ
• Materiale: Acciaio inossidabile
• Dimensioni: 4.53 x 2.76 x 0.4 pollici (115 x 70 x 10 mm)
• Peso dell'articolo: 4.8 once (136 grammi)
• Tipo di sensore: Infrarossi (IR)
• Gamma del sensore: Adjustable 2 to 7 inches (5 to 18 cm)
• Uscita relè: 1A
• Durata attivazione: Adjustable 0.5 to 20 seconds or Toggle
• Valutazione resistente alle intemperie: Grado di protezione IP65
• Tipo di montaggio: Montaggio su porta
• Componenti inclusi: Light (illuminator)

8. Garanzia e supporto

8.1 Informazioni sulla garanzia

This Seco-Larm Enforcer product is covered by a Garanzia limitata di 1 anni dalla data di acquisto. La presente garanzia copre i difetti di materiali e di fabbricazione in condizioni di normale utilizzo. Non copre danni derivanti da uso improprio, incidenti, modifiche non autorizzate o installazione impropria.

8.2 Supporto tecnico

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Seco-Larm customer support. Have your product model number (SD-9263-KSVQ) and date of purchase ready when contacting support.

Please visit the official Seco-Larm websito per le informazioni di contatto e le risorse di supporto più aggiornate.