Orbit 58006 Plastic Impact Head Sprinkler, 1/2-Inch

1. Prodotto finitoview

The Orbit 58006 Plastic Impact Head Sprinkler is designed for efficient and reliable watering of large lawn areas. This 1/2-inch male-threaded impact head offers exceptional value and is built for dependability, featuring an uninterrupted water flow that resists clogging, even with dirty or reclaimed water.

Caratteristiche principali:

• Copertura su vasta area: In grado di spruzzare fino a 90 metri di diametro, coprendo circa 6,360 metri quadrati quando impostato su un cerchio completo.
• Costruzione durevole: Made from high-impact resistant plastic, ensuring longevity without the concern of rust or corrosion.
• Copertura regolabile: Easily modify the spray coverage from a partial section to a full 360° watering pattern.
• Impostazioni personalizzabili: Utilize the deflector shield and diffuser screw to adjust the water stream and change the spray distance radius from 20 to 42 ft.
• Braccio anti-schizzi: Enhances the sprinkler's ability to maintain a consistent spray pattern and direction.
• Clog Resistant: Features a flow-through design that is resistant to clogs, making it suitable for various water sources.
• Sostituzione universale: Compatible with and can replace existing 1/2-inch impact sprinkler heads.

2. Configurazione e installazione

The Orbit 58006 sprinkler head is designed for tool-free installation and adjustment, making setup quick and easy.

Fasi di installazione:

1. Collegare al tubo: Screw the 1/2-inch male-threaded end of the sprinkler head onto a standard garden hose. Ensure a tight connection to prevent leaks.
2. Posizionare l'irrigatore: Place the sprinkler in the desired watering area. If using a spike base (sold separately or as part of a kit), firmly push the spike into the ground to secure the sprinkler.
3. Collegare l'alimentazione idrica: Connect the garden hose to your water source and turn on the water.

Figure 2.1: Orbit 58006 Plastic Impact Head Sprinkler connected to a hose, ready for use.

3. Funzionamento e regolazioni

The Orbit 58006 offers various adjustments to customize your watering experience.

Adjusting Spray Pattern and Distance:

• Spray Pattern Selection: The top of the sprinkler head features a dial with multiple spray pattern options (e.g., Small, Medium, Large, Shower, Flat, Vertical). Rotate the dial to align the arrow with your desired pattern.
• Regolazione della distanza di spruzzo: The diffuser screw, located on the top of the sprinkler head, allows you to alter the water stream. Turn the screw to break up the water stream, creating larger or smaller water droplets, which in turn adjusts the spray distance from 20 to 42 ft.

Adjusting Rotation (Coverage Angle):

The sprinkler's rotation can be adjusted from a partial section to a full 360° circle using the adjustable collars at the base of the sprinkler head.

1. Partial Circle: To set a partial watering arc, position the two adjustable collars to define the start and end points of the desired rotation. The sprinkler will oscillate between these two points.
2. Cerchio completo: To achieve a continuous 360° rotation, ensure the trip lever (a small wire clip) is flipped up and disengaged from the collars. This allows the sprinkler head to rotate freely.

4. Manutenzione

The Orbit 58006 Plastic Impact Head Sprinkler is designed for low maintenance due to its clog-resistant nature and durable plastic construction.

Suggerimenti generali per la manutenzione:

• Pulizia regolare: Periodically check the nozzle for any debris or mineral buildup. If necessary, gently clean with a soft brush or a small wire to ensure optimal spray performance.
• winterization: Before freezing temperatures, disconnect the sprinkler from the hose and drain any remaining water to prevent damage from ice expansion. Store in a dry, protected area.
• Ispezionare le connessioni: Regularly check hose connections for wear and tear. Replace gaskets if leaks occur.

5. Risoluzione Dei Problemi

If you encounter issues with your Orbit 58006 sprinkler, refer to the following common troubleshooting steps:

Problemi comuni e soluzioni:

• Sprinkler Not Rotating or Sticking:
  • Check for debris: Inspect the internal mechanism and nozzle for any dirt, sand, or other obstructions that might impede rotation. Clean thoroughly.
  • Water pressure: Ensure adequate water pressure. Low pressure can affect the impact mechanism's ability to rotate the head.
  • Adjust trip lever: Verify that the trip lever is correctly positioned for the desired rotation (up for full circle, engaged with collars for partial).
• Uneven Spray Pattern or Reduced Distance:
  • Clogged nozzle: Clean the nozzle opening as described in the Maintenance section.
  • Diffuser screw adjustment: Adjust the diffuser screw to ensure the water stream is not overly dispersed or too concentrated.
  • Water pressure: Confirm sufficient water pressure for optimal spray performance.
• Perdite nei punti di collegamento:
  • Tighten connection: Ensure the hose is securely tightened to the sprinkler head.
  • Check gasket: Inspect the rubber gasket inside the hose connection. Replace if it is worn, cracked, or missing.

6. Specifiche

7. Garanzia e supporto

For warranty information or technical support regarding your Orbit 58006 Plastic Impact Head Sprinkler, please refer to the product packaging or contact Orbit customer service directly. Contact details can typically be found on the manufacturer's official websito o sulla pagina di vendita al dettaglio del prodotto.