1. Prodotto finitoview
The Rugged Ridge XHD Modular Full-Width Rear Bumper is designed to provide robust protection and a customizable aesthetic for your Jeep. Constructed from heavy-duty 4mm thick steel with a textured black powder-coated finish and a tough E-Coat under-coating, this bumper is built for durability and longevity. Its modular design allows for various configurations, adapting to individual preferences and functional requirements. This rear bumper includes D-rings for recovery applications.
2. Informazioni sulla sicurezza
AVVERTIMENTO: This product and/or related accessories can expose you to chemicals and/or components which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves. Ensure the vehicle is securely supported before beginning any work. Refer to your vehicle's service manual for specific instructions regarding bumper removal and installation procedures.
3. Guida all'installazione
This section provides general guidelines for installing the Rugged Ridge XHD Rear Bumper. Specific steps may vary based on your vehicle's model year and existing modifications. Professional installation is recommended if you are unfamiliar with automotive modifications.
3.1 Strumenti richiesti (non inclusi)
- Socket Wrench Set
- Set di chiavi a forchetta
- Chiave dinamometrica
- Occhiali di sicurezza
- Guanti
- Jack and Jack Stands (or vehicle lift)
3.2 Passaggi di pre-installazione
- Parcheggiare il veicolo su una superficie piana e inserire il freno di stazionamento.
- Scollegare il terminale negativo della batteria del veicolo.
- Safely lift the rear of the vehicle using a jack and secure it with jack stands.
- Remove the existing rear bumper according to your vehicle's manufacturer specifications. This typically involves removing mounting bolts and disconnecting any wiring for lights or sensors.
3.3 Bumper Installation
- Carefully position the Rugged Ridge XHD Rear Bumper onto the vehicle's frame mounting points. It may be helpful to have assistance due to the bumper's weight.
- Insert the provided mounting hardware (bolts, washers, nuts) through the bumper and frame. Do not fully tighten any bolts at this stage. Leave all bolts loose to allow for adjustment.
- Align the bumper to ensure it is centered and level on the vehicle. Adjust as necessary.
- Once properly aligned, progressively tighten all mounting bolts to the manufacturer's recommended torque specifications. Refer to your vehicle's service manual for frame bolt torque values.
- If applicable, re-connect any wiring for lights or sensors.
- Abbassare il veicolo in sicurezza dai cavalletti.
- Ricollegare il terminale negativo della batteria.
4. Utilizzo e funzionalità
The Rugged Ridge XHD Rear Bumper serves multiple functions:
- Protezione del veicolo: Provides enhanced rear-end protection against impacts during off-road driving or minor collisions.
- Recovery Points: The integrated D-rings offer secure attachment points for recovery straps and winches, essential for off-road situations. Ensure D-rings are properly secured before use.
- Design modulare: The XHD series allows for future customization with compatible Rugged Ridge accessories, such as tire carriers (sold separately), to expand functionality.
5. Cura e manutenzione
To ensure the longevity and appearance of your Rugged Ridge XHD Rear Bumper, follow these maintenance guidelines:
- Pulizia regolare: Wash the bumper regularly with mild automotive soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish.
- Ispezionare per danni: Periodically inspect the bumper for any signs of damage, such as scratches, chips in the coating, or structural deformation. Address any damage promptly to prevent rust or further deterioration.
- Controllare i dispositivi di fissaggio: Regularly check all mounting bolts and hardware to ensure they remain tight. Vibrations from driving, especially off-road, can cause fasteners to loosen over time.
- Vernice per ritocchi: If the powder coat is chipped or scratched, use a compatible touch-up paint to prevent rust and maintain the bumper's appearance.
6. Risoluzione Dei Problemi
Se riscontri problemi durante o dopo l'installazione, tieni presente quanto segue:
- Problemi di montaggio: If the bumper does not align correctly, ensure all existing mounting points on the vehicle frame are clear of debris or obstructions. Verify that all bolts were left loose during initial positioning to allow for maximum adjustment before final tightening. Some older vehicles may have slight frame variations that require careful alignment.
- Componenti sciolti: If any part of the bumper feels loose after installation, re-check the torque on all mounting hardware. Ensure all washers and nuts are correctly installed.
- Parti mancanti: If any components are missing from the package, contact Rugged Ridge customer support immediately.
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Cresta accidentata |
| Numero di modello | 11546.10 |
| Posizione della parte automatica | Posteriore |
| Materiale | Acciaio legato |
| Colore | Nero |
| Finitura esterna | Textured Black Metal (Powder Coated) |
| Dimensioni del prodotto | 15"P x 70"L x 11"A |
| Peso dell'articolo | 94 libbre |
| Montaggio | 1976-1986 Jeep CJ; 1987-2006 Jeep Wrangler YJ/TJ |
| Caratteristiche | Modular design, D-rings included |
| Codice UPC | 804314228293 |
8. Garanzia e supporto
For information regarding product warranty, please refer to the official Rugged Ridge websito o contattare direttamente il servizio clienti. I termini e le condizioni di garanzia possono variare.
If you require technical assistance, have questions about installation, or need to report a defective product, please contact Rugged Ridge customer support through their official channels.
