RACO Work Cover Instruction Manual

1. Introduzione

This manual provides essential information for the proper installation, use, and maintenance of the RACO Work Cover. Please read these instructions carefully before proceeding with installation to ensure safe and effective operation.

2. Prodotto finitoview

The RACO Work Cover is a durable, square exposed work cover designed for mounting electrical receptacles and switches onto electrical boxes. It is constructed from 16-gauge galvanized steel, ensuring robust performance and longevity in various electrical installations.

Figura 2.1: Fronte view of the RACO Work Cover.

Figura 2.2: Indietro view of the RACO Work Cover, indicating internal volume and branding.

Caratteristiche principali:

• Costruzione durevole: Manufactured from 16-gauge galvanized steel for enhanced durability and protection.
• Installazione semplice: Features threaded tabs that wedge against the cover for a tight connection without requiring a separate nut.
• NEC Compliance: Meets the requirements of the 2014 NEC Article 250.146(A), allowing for bonding without the use of bonding jumpers for covers with crushed corners.
• Complete Hardware: Includes all necessary hardware for mounting receptacles.
• Elenco cULus: Certificati per gli standard di sicurezza e qualità.

3. Specifiche

4. Configurazione e installazione

The RACO Work Cover is designed for straightforward installation. Ensure all power to the electrical box is turned off at the circuit breaker before beginning any electrical work.

Strumenti richiesti (non inclusi):

• Cacciavite (adatto per il montaggio delle viti)
• Voltage tester (to confirm power is off)

Fasi di installazione:

1. La sicurezza prima di tutto: Turn off the power to the electrical circuit at the main breaker or fuse box. Verify that the power is off using a voltagetester.
2. Preparare la scatola: Ensure the electrical box is securely mounted and all wiring is properly terminated to the receptacle or switch you intend to install.
3. Attach Device to Cover: Align the receptacle or switch with the opening on the RACO Work Cover. Use the provided mounting screws to secure the device to the cover. The cover's design with threaded tabs allows for a secure fit without additional nuts.


Figure 4.1: Detail of the crushed corner design for improved installation.

4. Mount Cover to Box: Carefully position the assembled cover and device over the electrical box. Align the mounting holes on the cover with the screw holes on the electrical box.
5. Fissare la copertura: Insert the remaining mounting screws through the cover and into the electrical box. Tighten the screws until the cover is firmly secured to the box. Do not overtighten.
6. Ripristina alimentazione: Once the cover is securely installed, turn the power back on at the circuit breaker.

Note: The RACO Work Cover meets NEC Article 250.146(A) requirements, meaning a bonding jumper is not required for covers featuring crushed corners, simplifying the installation process.

5. Utilizzo del prodotto

The RACO Work Cover functions as a protective and mounting enclosure for electrical devices. Once installed, it provides a secure and compliant housing for your receptacles or switches, allowing them to be safely used. There are no operational controls on the cover itself; its function is passive protection and structural support.

6. Manutenzione

The RACO Work Cover requires minimal maintenance due to its durable galvanized steel construction.

• Pulizia: Periodically wipe the surface of the cover with a dry or slightly damp panno per rimuovere polvere e sporco. Evitare l'uso di detergenti abrasivi o solventi che potrebbero danneggiare la finitura.
• Ispezione: Annually inspect the cover for any signs of damage, corrosion, or loose connections. Ensure all mounting screws remain tight. If any damage is observed, replace the cover immediately.

7. Risoluzione Dei Problemi

Most issues related to the RACO Work Cover are installation-related. Refer to the installation section for proper procedures.

• La copertura non è adatta:
  • Ensure you have the correct size and type of work cover for your electrical box and device. This model (812C) is a square exposed work cover.
  • Check for any obstructions inside or around the electrical box that might prevent the cover from seating properly.
• Le viti non si stringono:
  • Verify that you are using the correct screws provided with the cover or appropriate replacement screws.
  • Check the threads on the electrical box and the cover for damage.
• Cover Appears Loose After Installation:
  • Ensure all mounting screws are tightened securely. Do not overtighten, as this can strip threads.
  • Confirm the electrical box itself is firmly mounted to the wall or structure.

8. Garanzia e supporto

Informazioni sulla garanzia:

The RACO Work Cover comes with a Garanzia di 1 anni dalla data di acquisto. La presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

Assistenza clienti:

For technical assistance, warranty claims, or product inquiries, please visit the official RACO brand store or contact their customer service department.

RACO Brand Store: https://www.amazon.com/stores/Raco/page/07990413-0B37-4FD4-968A-448263D18BEA