HEWLETT PACKARD 500205-571

HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM Memory Module User Manual

1. Introduzione

This manual provides essential information for the proper installation, operation, and maintenance of your HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM Memory Module (P/N: 500205-571). This memory module is designed for use in compatible server systems to enhance performance and reliability. Please read this manual thoroughly before installation and retain it for future reference.

2. Informazioni sulla sicurezza

Always observe the following safety precautions to prevent damage to the memory module, the host system, and to ensure personal safety:

  • Protezione dalle scariche elettrostatiche (ESD): Memory modules are sensitive to static electricity. Always wear an anti-static wrist strap or frequently touch a grounded metal object before handling the module.
  • Spegni: Ensure the host system is completely powered off and disconnected from the power source before installing or removing the memory module.
  • Maneggiare con cura: Hold the memory module by its edges. Avoid touching the gold connector pins or the integrated circuits (ICs) on the module.
  • Compatibilità: Verify that your server system supports DDR3 ECC Registered DIMMs and the specified capacity and speed before installation.

3. Prodotto finitoview

The HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM is a high-performance memory solution designed for server environments. It features Error-Correcting Code (ECC) for data integrity and is a Registered (Buffered) module, which enhances stability in systems with a large number of memory modules. This module operates at a speed of 1333MHz (PC3-10600) and has a 240-pin form factor.

HEWLETT-PACKARD 8GB DDR3 ECC Registered DIMM Memory Module

Figura 1: HEWLETT-PACKARD 8GB DDR3 ECC Registered DIMM Memory Module. This image shows the general appearance of the memory module, highlighting its form factor and integrated circuits.

4. Configurazione e installazione

Follow these steps carefully to install the memory module into your compatible server system:

  1. Preparare il sistema:
    • Shut down the server completely.
    • Disconnect the power cord and any other cables connected to the server.
    • Open the server chassis according to the manufacturer's instructions.
    • Wear an anti-static wrist strap and connect it to a grounded metal part of the server chassis.
  2. Individuare gli slot DIMM: Identify the available DIMM slots on the server motherboard. Consult your server's documentation for the correct slot population order, especially if installing multiple modules.
  3. Clip di ritenzione aperte: Spingere delicatamente verso l'esterno le clip di fissaggio su entrambe le estremità dello slot DIMM per aprirle.
  4. Inserire il modulo di memoria: Align the memory module with the DIMM slot, ensuring the notch on the module matches the key in the slot. This prevents incorrect insertion.
  5. Seat the Module: Apply even pressure to both ends of the memory module until it clicks into place and the retention clips automatically snap shut. Do not force the module; if it does not seat easily, recheck alignment.
  6. Verifica installazione: Visually inspect the module to ensure it is fully seated and the retention clips are securely closed.
  7. Chiudere e accendere: Close the server chassis, reconnect all cables, and power on the system. The system BIOS should automatically detect the new memory.

5. Operativo

Once installed, the HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM operates automatically within a compatible server system. No specific user interaction is typically required for its operation. The server's BIOS and operating system will manage the memory resources. Ensure your server's BIOS is updated to the latest version to ensure optimal compatibility and performance with new memory modules.

6. Manutenzione

Memory modules generally require minimal maintenance. Follow these guidelines for optimal longevity:

  • Pulizia: Keep the server environment clean and dust-free. Dust accumulation can impede airflow and lead to overheating.
  • Gestione: When handling the module, always use ESD precautions and hold it by the edges.
  • Magazzinaggio: If storing the module, keep it in an anti-static bag in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ispezione: Periodically inspect the module and its slot for any signs of damage or corrosion, especially during other system maintenance.

7. Risoluzione Dei Problemi

Se si verificano problemi dopo l'installazione del modulo di memoria, prendere in considerazione i seguenti passaggi per la risoluzione dei problemi:

  • Il sistema non si avvia/nessuna visualizzazione:
    • Ensure the memory module is fully seated in its slot and the retention clips are closed.
    • Verify that the module is installed in the correct slot according to your server's motherboard manual.
    • Provare a riposizionare il modulo.
    • Se sono installati più moduli, provare ad avviare solo un modulo alla volta per identificare un modulo potenzialmente difettoso.
  • Rilevata memoria errata:
    • Check the server's BIOS/UEFI settings to confirm the detected memory amount.
    • Ensure your server's motherboard and CPU support the total amount of RAM installed.
    • Update the server's BIOS/UEFI to the latest version, as this often improves memory compatibility.
  • Instabilità/arresti anomali del sistema:
    • Eseguire uno strumento di diagnostica della memoria (ad esempio MemTest86) per verificare la presenza di errori.
    • Ensure the server's cooling system is functioning correctly to prevent overheating.

If problems persist, consult your server's documentation or contact HEWLETT-PACKARD technical support.

8. Specifiche

CaratteristicaSpecificazione
Numero di parte500205-571
MarcaAzienda
Dimensione della memoria8 GB
Tecnologia della memoriaDDR3
Velocità di memoria1333 MHz
PC StandardPC3-10600
Conteggio dei pin240 pin
Correzione degli erroriECC (codice di correzione degli errori)
BufferizzazioneRegistered (Buffered)
Dispositivi compatibiliServer

9. Garanzia e supporto

This HEWLETT-PACKARD memory module is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official HEWLETT-PACKARD website. For technical assistance, troubleshooting, or warranty claims, please contact HEWLETT-PACKARD customer support through their official channels.

HEWLETT-PACKARD Official Websito: www.hp.com

Documenti correlati - 500205-571

Preview HP Net Vectra Technical Specifications and Configuration Guide
Detailed technical specifications, connection details, user configurable settings, and DIMM/CPU speed configurations for the Hewlett-Packard HP Net Vectra computer system.
Preview Manuale operativo e di assistenza dell'oscillatore a scansione Hewlett-Packard 8350A
Manuale operativo e di assistenza completo per l'oscillatore a spazzola Hewlett-Packard (HP) modello 8350A, che descrive in dettaglio installazione, funzionamento, collaudo, regolazioni e riparazione. Include specifiche, informazioni sulla sicurezza e sul controllo HP-IB.
Preview HP 8642M Synthesized Signal Generator Service Note: Resolving A11 and A12 Module Failures
This service note provides a procedure for HP-qualified personnel to diagnose and resolve out-of-lock conditions in the A11 and A12 modules of the HP 8642M Synthesized Signal Generator, often caused by silver migration on trimmer capacitors. It includes identification steps, required parts, and troubleshooting guidance.
Preview Hewlett-Packard 12606A Disc Memory Interface Kit Diagnostic Program Procedures Manual Supplement
This manual supplement provides diagnostic program procedures for the Hewlett-Packard 12606A Disc Memory Interface Kit, detailing setup, testing, and troubleshooting for reliable operation.
Preview Hewlett-Packard Dizüstü Bilgisayar Kullanıcı Kılavuzu: Bileşenler e Özellikler
Hewlett-Packard ha fornito assistenza per i lettori, i lettori e i lettori. Bu kapsamlı kullanıcı kılavuzu, cihazınızı etkili bir şekilde kullanmanız için gerekli tüm bilgileri sunar.
Preview Hewlett-Packard 3585A Spectrum Analyzer Operating Manual
Comprehensive operating manual for the Hewlett-Packard 3585A Spectrum Analyzer, detailing installation, operation, specifications, and performance testing of this advanced electronic test instrument.