1. Prodotto finitoview
The Nice Mindy TT1N is a control logic unit designed for the precise control of 230V motors used in applications such as blinds and roller shutters. This unit features an integrated radio receiver, simplifying installation and programming, and offers compatibility with various Nice remote controls and external sensors.
Caratteristiche principali:
- Controls motors up to 500 W.
- Stores up to 30 stations (remote controls).
- Adjustable operating time from 4 seconds to 4 minutes.
- Dimensioni compatte: 98 x 26 x 20 mm.
- Prodotto in Italia.
Figure 1: Nice Mindy TT1N Control Logic Unit. This image shows the compact white control unit with two white cables extending from one end. The unit has clear labeling for electrical connections and product specifications, including "Nice TT1N", "230V 50Hz", "Imax = 2,2A", "Pmax = 500W/400VA", and "IP55". A wiring diagram is also visible on the unit's surface.
2. Configurazione e installazione
The Nice Mindy TT1N is designed for simple installation and programming. Ensure all power is disconnected before proceeding with any wiring.
2.1. Schema elettrico
Refer to the diagram printed on the unit for correct electrical connections. The unit is designed for 230V 50Hz power supply.
Figura 2: dettagliata view of the Nice Mindy TT1N wiring diagram. The diagram shows terminals for motor connection (M, COM, Ground) and power supply (L, N). Numbered terminals (1-7) are also visible, indicating connections for control inputs and accessories. This diagram is crucial for proper installation.
- L (Linea) E N (neutro): Connect to the 230V AC power supply.
- M (Motor) E COM (Comune): Connect to the motor's power input.
- Simbolo di terra: Connect to the electrical ground.
- Terminali 1-7: These terminals are used for various control inputs and accessories, such as remote control programming and external sensor connections. Consult the full product manual for specific functions of each terminal.
2.2. Programmazione dei telecomandi
The unit features an integrated 433 MHz radio receiver. It is compatible with Nice Way, Nice Ergo, Nice Plano, and Nice Flor-S remote controls. Refer to your remote control's manual for specific pairing instructions. Generally, programming involves pressing a button on the control unit and then a button on the remote control to establish communication.
2.3. Sensor Association
The TT1N can be associated with external sun, wind, and rain sensors (not supplied). These sensors allow for automated operation of the motor based on environmental conditions. Consult the sensor's manual and the TT1N's detailed programming guide for integration steps.
3. Istruzioni per l'uso
Once installed and programmed, the Nice Mindy TT1N allows for convenient control of your motor.
3.1. Funzionamento di base
Use your paired Nice remote control to operate the connected motor. Typically, there are buttons for 'Up', 'Down', and 'Stop'.
- Premere il tasto 'Su' button to raise the blind/shutter.
- Premere il tasto 'Giù' button to lower the blind/shutter.
- Premere il tasto 'Fermare' button to halt movement at any point.
3.2. Automatic Operation (with Sensors)
If external sensors are connected and configured, the system can operate automatically:
- Sun Sensor: May automatically lower blinds/shutters when intense sunlight is detected.
- Sensore del vento: May automatically raise blinds/shutters to protect them during high winds.
- Sensore di pioggia: May automatically close windows or retract awnings during rain.
4. Manutenzione
The Nice Mindy TT1N is designed for long-term reliability and requires minimal maintenance.
- Pulizia: Pulire periodicamente l'esterno dell'unità con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Ispezione: Annually inspect wiring connections to ensure they are secure and free from damage.
- Protezione ambientale: Ensure the unit remains within its specified IP55 rating environment, protected from excessive dust and water jets.
5. Risoluzione Dei Problemi
If you encounter issues with your Nice Mindy TT1N, consider the following common solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il motore non risponde al telecomando. | Remote control not paired or battery low. Power supply issue. | Re-pair the remote control. Check remote battery. Verify power to the TT1N unit. |
| Il motore si ferma inaspettatamente. | Overload protection activated. Sensor input. | Check motor for obstructions. Verify sensor readings (e.g., high wind). Allow unit to cool if overloaded. |
| L'unità non si accende. | Nessuna alimentazione. Cablaggio errato. | Check main power supply. Inspect L and N connections. |
Se i problemi persistono, contattare l'assistenza tecnica qualificata.
6. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | CARINO |
| Modello | TT1N |
| Alimentazione elettrica | 230V 50Hz |
| Corrente massima (Imax) | 2.2A |
| Potenza massima (Pmax) | 500 W / 400 VA |
| Grado di protezione | Grado di protezione IP55 |
| Dimensioni (L x P x A) | 98 x 26 x 20 mm (approx. from package dimensions) |
| Frequenza Radio | 433 MHz |
| Remote Control Memory | Fino a 30 stazioni |
| Operating Time Programming | 4 seconds minimum to 4 minutes maximum |
7. Garanzia e supporto
For warranty information, please refer to the documentation provided with your purchase or contact your local Nice distributor. Technical support can be obtained through the official Nice webin loco o presso centri di assistenza autorizzati.
Per ulteriore assistenza, visitare il sito Nice official websito.
