Chemtronics ES1210 Electro-Wash PX Precision Cleaner Degreaser Instruction Manual

1. Prodotto finitoview

The Chemtronics ES1210 Electro-Wash PX is a fast-drying, one-step precision cleaning and degreasing agent. It is formulated to be safe for most plastics. Engineered with very low surface tension, this high-pressure aerosol formulation effectively flushes areas clean and evaporates instantly, leaving no residue. It is an extra-strength, general-purpose cleaner/degreaser.

Immagine 1: anteriore view of the Chemtronics ES1210 Electro-Wash PX aerosol can, showing the product name, brand, and key features like "Plastic Safe" and "Xtra Strength".

2. Informazioni e precauzioni di sicurezza

DANGER! EXTREMELY FLAMMABLE.

Direct inhalation of spray may be harmful. Container may explode if heated. Read precautions on back panel before use.

• Infiammabile: Tenere lontano da fonti di calore, superfici calde, scintille, fiamme libere e altre fonti di accensione. Vietato fumare.
• Contenitore pressurizzato: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source.
• Contatto visivo: Causes serious eye irritation. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
• Contatto con la pelle: Wash hands thoroughly after handling. If skin irritation occurs, get medical advice/attention.
• Inalazione: Direct inhalation of spray may be harmful. Use only in a well-ventilated area. If inhaled, move person to fresh air and restore breathing. If breathing is difficult, give oxygen. Get medical attention immediately.
• Magazzinaggio: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store in a well-ventilated place. Keep container tightly closed.
• Disposizione: Smaltire il contenuto/contenitore in conformità con le normative locali/regionali/nazionali/internazionali.
• Tenere fuori dalla portata dei bambini.

For industrial use only. Read Safety Data Sheets (SDS) prior to use. For SDS or technical data sheets, contact Chemtronics Technical Hot Line at 1-800-TECH-401 (1-800-832-4401) or visit their websito a www.chemtronics.com.

Immagine 2: Indietro view of the Chemtronics ES1210 aerosol can, displaying detailed usage directions and critical safety warnings in multiple languages.

Immagine 3: Lato view of the Chemtronics ES1210 aerosol can, providing further safety information, ingredient list, manufacturer contact details, and a barcode.

3. Impostazione e preparazione

1. Assicurarsi che l'area di lavoro sia ben ventilata.
2. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, to prevent eye and skin contact.
3. Identify the object to be cleaned. Ensure it is powered off and cooled down if applicable.
4. Shake the can gently before use.
5. Attach the extension tube to the nozzle for precision application, if required.

4. Istruzioni per l'uso

Follow these steps for effective cleaning and degreasing:

1. Hold the object to be cleaned in a vertical position.
2. Hold the aerosol can 4-6 inches (10-15 cm) from the surface of the object.
3. Spray from top to bottom, allowing the liquid to flush away contaminants.
4. For precision application or reaching confined areas, utilize the provided extension tube.
5. Allow the product to evaporate completely. It is designed to evaporate instantly, leaving no residue.

Note: This product is safe on most plastics. Always test on an inconspicuous area first if unsure about material compatibility.

5. Conservazione e manutenzione

Proper storage ensures product longevity and safety:

• Conservare in un luogo fresco, asciutto e ben ventilato.
• Keep away from direct sunlight and temperatures exceeding 50°C (122°F).
• Tenere il contenitore ben chiuso quando non in uso.
• Do not store near heat sources, sparks, or open flames.

No specific maintenance is required for the aerosol can itself.

6. Troubleshooting and First Aid

In case of accidental exposure or misuse, refer to the following:

• Contatto visivo: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention immediately.
• Contatto con la pelle: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention if irritation develops.
• Inalazione: In caso di inalazione, trasportare l'infortunato all'aria aperta. In caso di assenza di respirazione, praticare la respirazione artificiale. In caso di difficoltà respiratorie, somministrare ossigeno. Consultare immediatamente un medico.
• Ingestione: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
• Fuoco: In case of fire, use dry chemical, CO2, water spray (fog), or foam. Do not use water jet.

For further assistance, consult the Safety Data Sheet (SDS) or contact emergency services.

7. Specifiche

Image 4: A visual representation of the Chemtronics ES1210 aerosol can's size, indicating a height of approximately 10 inches (25 cm) when held by a hand.

8. Informazioni sulla garanzia

For specific warranty details regarding the Chemtronics ES1210 Electro-Wash PX, please refer to the official Chemtronics websito o contattare direttamente l'assistenza clienti. I termini e le condizioni della garanzia possono variare.

9. Supporto e informazioni di contatto

For technical assistance, product inquiries, or safety data sheets, please contact Chemtronics:

• Technical Hot Line: 1-800-TECH-401 (1-800-832-4401)
• Websito: www.chemtronics.com
• Indirizzo: Chemtronics, 8125 Cobb Center Dr., Kennesaw, Georgia USA 30152-4388

For 24-hour emergency support, call CHEMTREC at 1-800-424-9300 (or +1 703-527-3887 for collect calls).