1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Bio Bidet ELITE3 Freshwater Spray Bidet Attachment. Please read this manual thoroughly before installation and use to ensure proper function and safety. The ELITE3 is designed to provide a comfortable and hygienic personal wash experience with adjustable water pressure and dual nozzles.
Image 1.1: Bio Bidet ELITE3 Bidet Attachment installed on a toilet.
2. Informazioni sulla sicurezza
- Ensure all connections are tightened properly to prevent leaks. Do not overtighten.
- Use only cold water supply. This unit is not designed for hot water connection.
- Do not use abrasive cleaners or harsh chemicals on the bidet attachment, as this may damage the finish or internal components.
- Tenere fuori dalla portata dei bambini.
- If any part is damaged or missing, do not attempt to install or operate the unit. Contact customer support.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Bio Bidet ELITE3 Bidet Attachment
- Metal Braided Water Supply Hose
- T-Adapter Valve
- Mounting Plates and Bolts
- Rondelle di gomma
- Manuale di installazione (questo documento)
Image 3.1: Included metal braided water supply hose and T-adapter valve.
4. Guida all'installazione
Installation typically takes about 15 minutes and requires no special tools or electricity. You may need a wrench for tightening connections.
4.1. Preparazione
- Chiudere la valvola di erogazione dell'acqua al WC.
- Tirare lo sciacquone per svuotare completamente il serbatoio.
- Disconnect the existing water supply hose from the toilet tank. Have a small towel ready to catch any residual water.
4.2. Attaching the T-Adapter
- Install the T-adapter valve to the fill valve on the bottom of your toilet tank. Ensure the rubber washer is properly seated.
- Connect your toilet's original water supply hose to the bottom of the T-adapter.
4.3. Installing the Bidet Attachment
- Remove your toilet seat. Place the bidet attachment on the toilet rim, aligning the mounting holes with those on your toilet.
- Place your toilet seat back on top of the bidet attachment and secure it using the original toilet seat bolts. Adjust the bidet attachment forward or backward as needed for optimal fit.
- Connect one end of the provided metal braided water supply hose to the side of the T-adapter.
- Connect the other end of the metal braided water supply hose to the water inlet on the bidet attachment.
Image 4.1: Connecting the water supply hose to the bidet attachment.
4.4. Passaggi finali
- Slowly turn on the main water supply valve to your toilet.
- Controllare tutti i collegamenti per eventuali perdite. In caso di perdite, serrare leggermente i collegamenti. Non serrare eccessivamente.
Your Bio Bidet ELITE3 is now ready for use.
Video di installazione
Video 4.1: General installation guide for bidet attachments. This video demonstrates the typical steps for installing a bidet attachment to a toilet.
5. Istruzioni per l'uso
The ELITE3 features two control knobs for easy operation.
Image 5.1: Control panel with water pressure and nozzle selection knobs.
5.1. Water Pressure Control
- The top knob controls the water pressure. Turn it clockwise to increase pressure and counter-clockwise to decrease pressure.
- Start with the lowest pressure setting and gradually increase to your desired comfort level.
- Turn the knob to the 'OFF' position to stop the water flow.
5.2. Nozzle Selection and Cleaning
- The bottom knob allows you to select the desired wash function: Lavaggio posteriore (for rear cleansing) or Lavaggio femminile (for front cleansing).
- To activate the self-cleaning function for the nozzles, turn the knob to the 'NOZZLE CLEANING' position. Water will spray to rinse the nozzles.
Image 5.2: Dual retractable nozzles for posterior and feminine wash.
Video dell'operazione
Video 5.1: Demonstration of bidet attachment features and operation. This video illustrates how to use the control knobs for different wash functions.
6. Manutenzione
6.1. Cleaning the Bidet
- Regularly wipe down the exterior of the bidet attachment with a soft, damp panno e sapone neutro.
- Do not use harsh detergents, abrasive cleaners, or brushes, as these can scratch the surface.
6.2. Pulizia degli ugelli
- Use the built-in 'NOZZLE CLEANING' function on the control knob for a quick rinse of the nozzles.
- For a more thorough cleaning, gently pull out the nozzles and clean them with a soft brush and mild soap. Ensure they retract properly after cleaning.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Perdite d'acqua dai collegamenti | Loose connections, missing or improperly seated washers | Ensure all connections are hand-tightened, then use a wrench for a quarter turn. Check that rubber washers are correctly placed. Do not overtighten. |
| Nessuno spruzzo d'acqua o spruzzo debole | Water supply valve closed, low water pressure, clogged nozzle | Ensure the toilet's water supply valve is fully open. Check household water pressure. Clean the nozzles using the self-cleaning function or manually. |
| Gli ugelli non si ritraggono | Debris, obstruction, or damage | Check for any visible obstructions around the nozzles. Clean the nozzles thoroughly. If the issue persists, contact customer support. |
| Toilet seat is not level | Bidet attachment not properly aligned | Adjust the bidet attachment's position on the toilet rim and ensure the toilet seat bolts are tightened evenly. |
8. Specifiche
- Modello: Elite3
- Dimensioni: 9 x 19 x 4 inches (Product), 17 1/4 x 8 inches (Size)
- Peso dell'articolo: 2.89 libbre
- Materiale: Brass (valve), Quality ABS Resin
- Colore: Bianco
- Fonte di energia: Non-electric (operates on water pressure)
- Ugelli: Dual, Retractable, Self-cleaning
- Controllo della pressione dell'acqua: Manopola regolabile
Image 8.1: Dimensional drawing of the Bio Bidet ELITE3.
Image 8.2: Diagram illustrating the internal brass flow valve for durability and precise flow control.
9. Garanzia e supporto
9.1. Informazioni sulla garanzia
The manufacturer warranty covers customer purchases in the USA and Canada for 1 anno dalla data di acquisto. La presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.
9.2. Assistenza clienti
For technical assistance, warranty claims, or any questions regarding your Bio Bidet ELITE3, please contact our customer care:
Numero assistenza clienti: 877.339.5214
Please have your model number (Elite3) and date of purchase available when contacting support.