Introduzione
The Energizer FW2C LED Wearable Light is a compact and lightweight illumination device designed for various activities where hands-free lighting is beneficial. It features multiple light modes and a durable, waterproof design, making it suitable for outdoor and active use.
This manual provides essential information for the safe and effective use of your Energizer FW2C LED Wearable Light, including setup, operation, maintenance, and troubleshooting.
Informazioni sulla sicurezza
- Do not look directly into the LED light. It can cause temporary vision impairment.
- Tenere fuori dalla portata dei bambini.
- Smaltire le batterie correttamente secondo le normative locali.
- Non mischiare batterie vecchie e nuove o diversi tipi di batterie.
- Assicurarsi che il vano batteria sia ben chiuso per garantire la resistenza all'acqua.
Contenuto della confezione
- 1 x Energizer FW2C LED Wearable Light
- 2 x CR2032 Lithium Coin Batteries (for trial purposes)
Configurazione: installazione della batteria
The Energizer FW2C LED Wearable Light requires two CR2032 coin-shaped lithium batteries.
- Individuare il coperchio del vano batteria sul retro della lampada.
- Using a small coin or screwdriver, gently twist the cover counter-clockwise to unlock and remove it.
- Insert two CR2032 batteries, ensuring the positive (+) side faces upwards as indicated inside the compartment.
- Replace the battery compartment cover and twist clockwise until it is securely locked. This ensures the IPX4 water resistance is maintained.
Immagine: Frontale view of the Energizer FW2C LED Wearable Light, highlighting its compact size and dimensions (60mm height, 33mm width, 20mm depth). This image also shows icons indicating 30 lumens brightness, 3 hours 15 minutes maximum runtime, 1m impact resistance, and IPX4 water resistance.
Istruzioni per l'uso
The light features a single button for controlling its functions.
- Per accendere/spegnere: Press the power button once to turn the light on. Press it again to cycle through modes, and a final press to turn it off.
- Modalità luce: The Energizer FW2C offers three distinct light modes:
- Luce bianca: Provides bright, steady illumination.
- Luce rossa: Offers a steady red light, useful for preserving night vision or as a low-intensity signal.
- Rosso lampeggiante: A flashing red light for enhanced visibility and signaling, especially in low-light conditions.
Image: Two Energizer FW2C lights side-by-side, illustrating the "High" white light mode and the "Red/Red Flash" mode. This demonstrates the visual difference between the primary white light and the red light options.
The integrated clip allows for versatile attachment to clothing, bags, or other gear, providing hands-free operation.
Image: An Energizer FW2C LED Wearable Light clipped onto a pocket, demonstrating its hands-free attachment capability. This highlights the product's design for convenience and portability.
Image: A person running at night with the Energizer FW2C LED Wearable Light clipped to their jacket zipper, illustrating its use during night running for visibility.
Manutenzione
- Pulizia: Pulisci la luce con un panno morbido, damp panno. Non usare detergenti abrasivi o solventi.
- Sostituzione della batteria: Replace batteries when the light dims or stops functioning. Follow the "Setup: Battery Installation" steps. Always replace both batteries at the same time.
- Magazzinaggio: Se si conserva la luce per un periodo prolungato, rimuovere le batterie per evitare perdite.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Batterie scariche o inserite in modo errato. | Replace batteries or ensure they are inserted with correct polarity (+/-). |
| La luce è fioca. | Batteria scarica. | Sostituire le batterie. |
| Water resistance seems compromised. | Il coperchio del vano batteria non è sigillato correttamente. | Ensure the battery compartment cover is fully closed and twisted clockwise until secure. |
Specifiche
- Modello: FW2C
- Luminosità massima: 30 lumen
- Continuous Lighting Time: Fino a 3 ore 15 minuti
- Sorgente luminosa: GUIDATO
- Tipo di batteria: 2 x CR2032 coin-shaped lithium batteries
- Dimensioni del prodotto (L x P x A): Circa 28 x 20 x 60 mm (1.1 x 0.8 x 2.4 pollici)
- Peso (senza batterie): 18 g (0.6 once)
- Resistenza all'acqua: IPX4 (Withstands 10 minutes of water from all directions)
- Componenti inclusi: Testare le batterie
Image: A collage showing the Energizer FW2C LED Wearable Light being used in various situations: running, walking a dog, during a power outage, and hiking. This illustrates the versatility and practical applications of the light.
Informazioni sulla garanzia
This Energizer FW2C LED Wearable Light comes with a Garanzia limitata di 1 anni dalla data di acquisto. Questa garanzia copre difetti di materiali e lavorazione in condizioni di normale utilizzo.
The warranty does not cover damage resulting from misuse, abuse, accident, unauthorized repair or modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Supporto
For further assistance, product inquiries, or warranty claims, please contact Energizer customer support through their official websito o rivenditore presso cui è stato acquistato il prodotto.
Please have your product model number (FW2C) and proof of purchase available when contacting support.
