Stampante fotografica a sublimazione di colore DNP DS-RX1HS: Manuale di istruzioni per l'utente

1. Introduzione

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DNP DS-RX1HS Dye Sublimation Photo Printer. The DS-RX1HS is designed for high-volume photo printing, offering enhanced efficiency and print speed for various applications, including photo booths and event photography. It supports multiple print sizes and features USB iSerial connectivity for seamless integration with Mac and PC systems.

Figure 1: DNP DS-RX1HS Photo Printer, angled front view. This image shows the compact design of the printer with its front media tray and the DNP logo.

2. Impostazione

Follow these steps to set up your DNP DS-RX1HS printer.

2.1 Disimballaggio

1. Estrarre con attenzione la stampante dall'imballaggio.
2. Verify that all included components are present: Printer CD, Drivers for Windows OS7 and 8.1, Printhead Cushion, Power Cord. (Print media is not included and must be purchased separately).
3. Remove any protective tapes or packing materials from the printer.

2.2 Collegamento della stampante

The DS-RX1HS connects to your computer via a USB 2.0 Type B port.

1. Locate the USB 2.0 Type B port on the rear of the printer.
2. Connect one end of a USB 2.0 cable (not included) to the printer and the other end to an available USB port on your computer.

Figura 2: Posteriore view of the DNP DS-RX1HS Photo Printer. This image highlights the power input and USB connectivity port on the back panel.

2.3 Installazione del driver

Install the necessary drivers before operating the printer.

• Per Windows: Insert the included Printer CD and follow the on-screen instructions to install drivers for Windows OS7 and 8.1. Drivers for newer Windows versions and a printer Status App for RX1HS are available for download from the DNP websito.
• Per Mac: A Mac OS-X Print Center Driver is available for download from the DNP websito.

2.4 Caricamento dei supporti di stampa

The DS-RX1HS uses dye-sublimation media, consisting of a ribbon and glossy photo paper.

1. Aprire il coperchio anteriore della stampante.
2. Carefully insert the paper roll into the designated slot.
3. Load the ribbon cartridge according to the instructions provided with your media kit. Ensure it is securely seated.
4. Chiudere il coperchio anteriore.

Figura 3: Interno view of the DNP DS-RX1HS Photo Printer with media loaded. This image shows the paper roll and ribbon cartridge installed inside the printer.

2.5 Collegamento di alimentazione

1. Connect the power cord to the power input on the rear of the printer.
2. Collegare l'altra estremità del cavo di alimentazione a una presa elettrica adatta.
3. Press the power button, usually located on the front or side, to turn on the printer. The POWER indicator light should illuminate.

3. Utilizzo della stampante

Once the printer is set up and drivers are installed, you can begin printing.

3.1 Processo di stampa di base

1. Assicurarsi che la stampante sia accesa e collegata al computer.
2. Open the image you wish to print using your preferred photo editing or printing software.
3. Seleziona DNP DS-RX1HS come stampante.
4. In the print settings, choose your desired print size (e.g., 4x6", 6x8") and quality (300x300dpi or 300x600dpi).
5. Initiate the print command. The printer will process and output the photo.

3.2 Print Speed and Sizes

• Velocità di stampa: Approximately 12.4 seconds for a 4x6" print and 22 seconds for a 6x8" print.
• Dimensioni supportate: The printer supports 2x6", 4x6", and 6x8" print formats.

3.3 USB iSerial Functionality

The USB iSerial feature allows for simplified management when connecting multiple DS-RX1HS units to a single computer, enhancing productivity for large-scale events. Refer to the DNP website for specific software and setup instructions for this feature.

4. Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e prolunga la durata della stampante.

4.1 Media Replacement

The printer can produce up to 700 4x6" sheets per roll. Replace the ribbon and paper roll when the media runs out or when prompted by the printer status.

1. Aprire il coperchio anteriore.
2. Remove the used paper roll and ribbon cartridge.
3. Install new media as described in Section 2.4.
4. Chiudere il coperchio anteriore.

4.2 Pulizia della testina di stampa

A printhead cushion is included with the printer. Refer to the DNP official documentation for detailed instructions on printhead cleaning procedures to maintain print quality.

4.3 Pulizia generale

• Pulire la parte esterna della stampante con un panno morbido e asciutto.
• Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
• Ensure no dust or debris accumulates in the media loading area.

5. Risoluzione Dei Problemi

This section addresses common issues you might encounter with your DS-RX1HS printer.

5.1 Spie luminose

The front panel of the printer features several indicator lights to communicate its status.

Figura 4: Fronte view of the DNP DS-RX1HS Photo Printer. This image shows the indicator lights for Power, Ribbon, Paper, and Error on the left side of the front panel.

• ENERGIA: Indica che la stampante è accesa.
• RIBBON: Illuminates when the ribbon needs replacement or is incorrectly installed.
• CARTA: Illuminates when the paper roll needs replacement or is incorrectly installed.
• ERRORE: Indicates a general error. Refer to the printer's Status App or driver software for specific error codes.

5.2 Problemi comuni e soluzioni

For more detailed troubleshooting, consult the DNP Status App for Windows or the official DNP support websito.

6. Specifiche

Key technical specifications for the DNP DS-RX1HS Photo Printer:

7. Garanzia e supporto

For information regarding product warranty, technical support, and additional resources, please contact DNP directly or visit their official websito.

• Produttore: DNP
• Ufficiale Websito: Refer to your product packaging or the DNP website for the most current support information and driver downloads.