1. Introduzione
Grazie per l'acquistoasing the Klipsch R-5650-S II In-Wall Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read these instructions thoroughly before beginning installation or use to ensure optimal performance and safety.
Caratteristiche principali:
- Dual 1-inch (2.54cm) Titanium diaphragm compression driver mated to a pivoting 90° x 90° square Tractrix Horn.
- 6.5-inch Cerametallic cone woofer for robust bass response.
- Two vertically stacked Tractrix Horn-loaded tweeters designed to enhance surround sound effects.
- Horn-loaded technology engineered to increase acoustic output and reduce distortion.
- IR receiver knock out for integration with remote control systems.
2. Istruzioni di sicurezza
Per evitare danni all'altoparlante o lesioni personali, osservare sempre le seguenti precauzioni di sicurezza:
- Leggi le istruzioni: Tutte le istruzioni di sicurezza e operative devono essere lette prima di utilizzare il prodotto.
- Conservare le istruzioni: Conservare le istruzioni di sicurezza e di funzionamento per riferimento futuro.
- Attenzione alle avvertenze: Rispettare tutte le avvertenze riportate sul prodotto e nelle istruzioni per l'uso.
- Installazione: Installation should only be performed by qualified personnel. Ensure the mounting surface can support the speaker's weight.
- Cablaggio: Ensure all wiring is correctly connected and insulated to prevent short circuits or electrical hazards. Turn off power to the amplificatore prima di effettuare i collegamenti.
- Umidità: This speaker is not waterproof. Do not expose it to water or excessive moisture.
- Pulizia: Unplug the product from the amplifier before cleaning. Use a dry cloth only.
3. Contenuto della confezione
The Klipsch R-5650-S II In-Wall Speaker package typically includes:
- One (1) Klipsch R-5650-S II In-Wall Speaker
- Installation Template (usually printed on the packaging)
Note: Additional tools and wiring are required for installation and are not included.
4. Configurazione e installazione
Proper installation is crucial for optimal sound performance and speaker longevity. Consult a professional installer if you are unsure about any steps.
4.1 Pianificazione del posizionamento degli altoparlanti
For surround sound applications, position the R-5650-S II speakers on the side or rear walls, typically at or slightly above ear level when seated. The unique horn array allows for flexible placement while maintaining an enveloping sound field.
4.2 Preparazione della parete
- Individuare i perni: Use a stud finder to locate wall studs and avoid them when choosing your mounting location. Ensure there are no electrical wires or plumbing in the desired area.
- Trace Cutout: Use the provided cutout template to trace the opening on the wall.
- Apertura di taglio: Carefully cut the opening in the drywall using a drywall saw.
4.3 Collegamenti di cablaggio
Prima di effettuare qualsiasi collegamento, assicurarsi che il amplificatore o il ricevitore è spento e scollegato dalla presa di corrente.
- Run speaker wire (minimum 16-gauge, heavier for longer runs) from your amplifier to the wall opening.
- Rimuovere circa 1/2 pollice (12 mm) di isolamento dalle estremità dei cavi degli altoparlanti.
- Connect the positive (+) terminal of the speaker to the positive (+) terminal of the amplifier. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.
Figura 1: Interno view of the Klipsch R-5650-S II In-Wall Speaker, showing the woofer, dual tweeters, and crossover components.
4.4 Montaggio dell'altoparlante
- Carefully insert the speaker into the wall opening.
- Tighten the dog-leg mounting clamps (usually by turning screws on the front baffle) until the speaker is securely fastened to the wall. Do not overtighten.
- Attach the magnetic grille to the speaker baffle. The grille is designed to snap into place.
5. Istruzioni per l'uso
Once installed and connected, your Klipsch R-5650-S II In-Wall Speaker is ready for use.
- Assicurarsi che tutti i collegamenti siano sicuri.
- Collega e accendi il tuo amplificatore o ricevitore.
- Seleziona la sorgente di input appropriata sul tuo amppiù vivace.
- Start playback at a low volume and gradually increase it to your desired listening level.
The pivoting Tractrix Horn allows you to direct the high-frequency sound towards the primary listening area for optimized sound imaging.
6. Manutenzione
Your Klipsch R-5650-S II In-Wall Speaker requires minimal maintenance.
- Pulizia: Use a soft, dry cloth to gently wipe the speaker grille and frame. Avoid using abrasive cleaners, solvents, or excessive moisture.
- Cura della griglia: The magnetic grille can be removed for cleaning if necessary. Handle with care to avoid bending or damaging it.
- Ispezione: Controllare periodicamente i collegamenti dei cavi degli altoparlanti per assicurarsi che siano sempre saldi.
7. Risoluzione Dei Problemi
Se riscontri problemi con l'altoparlante, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun suono dall'altoparlante | Collegamenti elettrici errati Amplifier/receiver off or incorrect input selected Speaker wire damaged | Check speaker wire polarity and connections at both speaker and amppiù vivace. Garantire amplifier è acceso e l'input corretto è selezionato. Inspect speaker wire for breaks or shorts; replace if necessary. |
| Suono distorto o poco chiaro | Over-driving the speaker Collegamenti allentati Non corretto ampimpostazioni del lifier | Ridurre il livello del volume. Controllare tutti i collegamenti dei cavi degli altoparlanti. Fare riferimento al tuo amplifier's manual for proper settings. |
| Speaker rattling or buzzing | Montaggio allentato Object vibrating against speaker | Assicurare il montaggio clamps are securely tightened (do not overtighten). Check for any loose objects in the wall cavity or near the speaker. |
8. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Nome del modello | R-5650-S II |
| Marca | Klipsch |
| Tipo di altoparlante | A parete |
| Materiale | Acrilonitrile Butadiene Stirene (ABS) |
| Diametro del woofer | 6.5 Inches (Cerametallic cone) |
| Tweeter | Dual 1-inch Titanium diaphragm compression driver with pivoting Tractrix Horn |
| Impedenza | 8 Ohm |
| Frequency Response (low end) | 60 Hz (Full range not specified) |
| Configurazione di sistema consigliata | Suono surround 5.1 |
| Dimensioni del prodotto (P x L x A) | 3.75"P x 9.3"L x 14.3"A |
| Tipo di montaggio | Montaggio a parete |
| Impermeabile | NO |
| Codice UPC | 743878024005 |
9. Informazioni sulla garanzia
The Klipsch R-5650-S II In-Wall Speaker comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Klipsch webo la scheda di garanzia inclusa nell'acquisto. Conservare la prova d'acquisto per eventuali reclami in garanzia.
10. Supporto
Per ulteriore assistenza, supporto tecnico o per view additional product information, please visit the official Klipsch websito: