1. Introduzione
The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.
Caratteristiche principali:
- Banda larga amplificazione.
- Incorporates switched-mode power supplies.
- Allows mixing of MATV signals via an independent input.
- Dimensioni compatte: 180 x 110 x 55 mm.
- High-shielding chassis, manufactured from Zamak.
- Separato amplification with very low noise figure, preserving signal quality.
- Ultra-reduced ergonomic design.
Figura 1: Posteriore view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.
2. Informazioni sulla sicurezza
Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Alimentazione elettrica: Assicurarsi che il dispositivo sia collegato a una presa di corrente con la tensione correttatage e frequenza come specificato nelle specifiche tecniche.
- Ventilazione: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
- Umidità: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp ambienti.
- Pulizia: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
- Manutenzione: Non tentare di riparare questo prodotto da soli. Affidare tutte le operazioni di manutenzione a personale di assistenza qualificato.
- Montaggio: Ensure the device is securely mounted on a stable surface to prevent it from falling.
3. Contenuto della confezione
Verificare che tutti gli articoli siano presenti nel pacco:
- Televes 5363 Multiband Amppiù vivace
- Power cable (integrated or separate, depending on model variant)
- Manuale di istruzioni (questo documento)
- Accessori di montaggio (viti, tasselli)
4. Configurazione e installazione
The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:
4.1. Montaggio del Amppiù vivace
- Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
- Mark the positions for the mounting screws on the wall or surface.
- Se necessario, praticare dei fori pilota e inserire i tasselli.
- Mettere in sicurezza il amplificatore utilizzando viti appropriate.
4.2. Connecting Signals
IL amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.
Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amppiù vivace.
- VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
- Ingresso SAT: Connect your satellite dish signal cable to the designated SAT input.
- Produzione: Collegare l'uscita del amplifier to your SMATV distribution network or directly to your television/receiver.
4.3. Collegamento elettrico
Collegare il cavo di alimentazione al amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.
Figura 3: Fronte view of the Televes 5363 Multiband Amplifier, showing the power input.
5. Funzionamento
The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.
5.1. Signal Mixing
IL amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.
5.2. Regolazione del guadagno
IL amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.
6. Manutenzione
To ensure optimal performance and longevity of your Televes 5363 Multiband Amplifier, segui queste semplici linee guida per la manutenzione:
- Pulizia: Pulire periodicamente l'esterno del amplificatore con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Ventilazione: Ensure that the ventilation slots are free from dust and obstructions to prevent overheating.
- Connessioni: Controllare di tanto in tanto tutti i collegamenti dei cavi per accertarsi che siano saldi e privi di corrosione.
- Ambiente: Mantieni il amplifier in a dry, cool environment, away from direct sunlight and extreme temperatures.
7. Risoluzione Dei Problemi
If you encounter issues with your Televes 5363 Multiband Amplifier, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:
- Nessun segnale:
- Check all cable connections to ensure they are properly seated.
- Verificare che il amplifier is receiving power (check power indicator light if available).
- Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
- Weak or Poor Quality Signal:
- Check the quality of the input signals before they reach the amppiù vivace.
- Ensure all connections are tight and free from damage or corrosion.
- Verificare che il amplifier's gain settings (if adjustable) are appropriate for your installation.
- Nessun potere:
- Check the power cable connection to both the amplifier and the electrical outlet.
- Provare la presa elettrica con un altro dispositivo per accertarsi che funzioni.
Se il problema persiste dopo aver provato queste soluzioni, contattare un supporto tecnico qualificato.
8. Specifiche tecniche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | 5363 |
| Produttore | Televés |
| Materiale | Zama |
| Numero di input | 2 (VHF/UHF, SAT) |
| Output Level (Vs) | 124 dBuV |
| Gain (SAT) | 45 dB |
| Gamma di frequenza | Up to 2150 MHz (FI) |
| Tipo di montaggio | Montaggio in superficie |
| Dimensioni (L x P x A) | Dimensioni: 180 x 110 x 55 mm |
| Peso del prodotto | 950 grammi |
| Alimentazione elettrica | Switched-mode power supply (internal) |
| Batterie richieste | NO |
9. Garanzia e supporto
This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes websito.
For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes websito.
