Introduzione
This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Gewiss GW62535 CEE Wall Socket. This product is an IP67 rated industrial connector, specifically designed for demanding environments and high-current applications, featuring a 3P+N+T (3-phase + Neutral + Earth) configuration, rated for 125 Amperes at 400 Volts. Please read this manual thoroughly before proceeding with any installation or use.
Informazioni sulla sicurezza
WARNING: Electrical installation and maintenance should only be performed by qualified personnel. Failure to follow these instructions can result in serious injury, electric shock, fire, or property damage.
- Always disconnect power at the main circuit breaker or fuse box before installing, servicing, or removing the socket.
- Assicurarsi che il volumetage and current ratings of the power supply match the specifications of the GW62535 socket (400V, 125A).
- Verify proper grounding (Earth connection) to prevent electric shock.
- Do not use the socket if it appears damaged or if any parts are missing.
- Protect the socket from mechanical impact and unauthorized access.
- The IP67 rating ensures protection against dust and temporary immersion in water. However, do not intentionally submerge the socket or expose it to high-pressure water jets.
Prodotto finitoview
The Gewiss GW62535 is a robust CEE wall-mounted socket designed for industrial environments. Its key features include:
- Tipo: CEE Wall Socket, fixed, 90° parallel entry.
- Configurazione: 3P+N+T (3-phase, Neutral, Earth).
- Valutazione attuale: 125 Ampere.
- Voltage Valutazione: 400 Volt.
- Grado di protezione IP: IP67 (Dust tight and protected against temporary immersion in water).
- Materiale: High-quality, durable plastic for industrial use.

Figure 1: Gewiss GW62535 CEE wall socket, highlighting its robust construction and angled design for industrial applications.
Configurazione e installazione
Installation of the Gewiss GW62535 CEE Wall Socket requires adherence to local electrical codes and safety regulations. It must be installed by a qualified electrician.
- Preparazione:
- Ensure the power supply is completely disconnected.
- Gather necessary tools: screwdriver set, wire strippers, crimping tool (if required), mounting hardware, drill.
- Select a suitable mounting location that is flat, stable, and protected from excessive mechanical stress.
- Mounting the Socket:
- Open the socket housing by unscrewing the retaining screws.
- Position the socket base on the chosen wall surface.
- Segnare i punti di foratura per le viti di montaggio.
- Drill pilot holes if necessary and secure the socket base firmly to the wall using appropriate screws and anchors.
- Collegamenti elettrici:
- Route the power cable into the socket housing through the designated cable entry point. Ensure the cable gland provides a secure, watertight seal to maintain the IP67 rating.
- Strip the outer sheath and individual wire insulation to the appropriate lengths.
- Connect the wires to the corresponding terminals:
- L1, L2, L3: Phase conductors (typically brown, black, grey).
- N: Neutral conductor (typically blue).
- PE (Earth): Protective Earth conductor (green/yellow).
- Assicurarsi che tutte le viti dei terminali siano serrate saldamente per evitare collegamenti allentati e surriscaldamento.
- Assemblaggio finale:
- Verificare che tutti i collegamenti siano corretti e sicuri.
- Close the socket housing, ensuring the gasket is properly seated to maintain the IP67 seal.
- Tighten the retaining screws evenly.
- Prova:
- Before restoring power, perform continuity and insulation resistance tests as per local regulations.
- Restore power and test the socket with a suitable load.
Istruzioni per l'uso
The Gewiss GW62535 CEE Wall Socket is designed for straightforward operation with compatible CEE plugs.
- Connecting a Plug:
- Ensure the plug is clean and free from debris.
- Align the keyway on the plug with the corresponding keyway on the socket.
- Insert the plug firmly into the socket until it clicks or is fully seated.
- For some plugs, a locking ring may need to be twisted to secure the connection.
- Disconnecting a Plug:
- If a locking ring is present, twist it to unlock the plug.
- Grasp the plug body firmly and pull it straight out of the socket. Do not pull by the cable.
- Avoid disconnecting under load if possible, especially with high-current applications, to prevent arcing and wear.
Manutenzione
Regular maintenance ensures the longevity and safe operation of your Gewiss GW62535 CEE Wall Socket.
- Ispezione periodica: Visually inspect the socket regularly for any signs of damage, cracks, discoloration, or loose parts. Check the cable entry for secure sealing.
- Pulizia: Pulisci l'esterno della presa con un pannoamp cloth. Do not use abrasive cleaners or solvents that could damage the plastic. Ensure the socket is dry before use.
- Controllo del terminale: Periodically (e.g., annually or as per site requirements), with power disconnected, open the housing and check that all terminal screws are tight. Loose connections can cause overheating and fire hazards.
- Integrità della guarnizione: Ensure the sealing gasket between the housing parts is intact and properly seated to maintain the IP67 rating. Replace if damaged.
Risoluzione dei problemi
This section addresses common issues you might encounter with the Gewiss GW62535 CEE Wall Socket.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna alimentazione alla presa. |
|
|
| Plug does not fit or is difficult to insert. |
|
|
| Socket feels warm during operation. |
|
|
If troubleshooting steps do not resolve the issue, contact a qualified electrician or Gewiss customer support.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Gewiss |
| Numero di modello | GW62535 |
| Tipo di prodotto | CEE Wall Socket, Fixed, 90° Parallel Entry |
| Configurazione | 3P+N+T (3-phase + Neutral + Earth) |
| Valutazione attuale | 125 Amperi |
| Voltage Valutazione | 400 Volt |
| Grado di protezione IP | IP67 (Dust tight, protected against temporary immersion) |
| Produttore | Gewiss |
| ASIN | B0085AL1W8 |
| Codice articolo internazionale (EAN) | 08011564005372 |
Garanzia e supporto
Specific warranty information for the Gewiss GW62535 CEE Wall Socket is not provided in the product data. For warranty details, please refer to the documentation included with your purchase or contact your point of sale. For technical support or further assistance, please contact Gewiss customer service or visit the official Gewiss websito.
Gewiss Ufficiale Websito: www.gewiss.com





