1. Introduzione
The TC Electronic DITTO LOOPER is a highly intuitive looper pedal designed specifically for guitarists. It offers essential looping functionalities with a simple one-button user interface, true bypass, analog-dry-through design, and an ultra-small footprint. This pedal provides 5 minutes of looping time, unlimited overdubs, and undo/redo functionality, ensuring high-quality 24-bit uncompressed audio.
2. Caratteristiche principali
- 5 minutes of loop time, unlimited overdubs and undo/redo functionality.
- Designed by guitarists, for guitarists, ensuring intuitive operation.
- True bypass and analog-dry-through preserve your original tone.
- Ultra-small footprint for easy integration into any pedalboard.
- 24-bit uncompressed high-quality audio for pristine sound.
3. Cosa c'è nella scatola
Your TC Electronic DITTO LOOPER package includes:
- TC Electronic DITTO LOOPER Pedal
Note: A 9V power supply providing 100 mA or more is required and not supplied with the pedal.
4. Impostazione
Follow these steps to set up your DITTO LOOPER pedal:
- Collegamento elettrico: Connect a 9V DC power supply (not included) to the power input jack on the pedal. Ensure the power supply provides 100 mA or more.
- Collegamento dello strumento: Connect your guitar to the input jack on the side of the pedal using a standard 1/4-inch instrument cable.
- AmpCollegamento lifier: Collega il jack di uscita del pedale al tuo ampl'ingresso del lifier utilizzando un altro cavo standard per strumenti da 1/4 di pollice.
- Loop Level Adjustment: Turn the "LOOP LEVEL" knob to your desired volume. This knob controls the playback volume of your recorded loops.
Image: TC Electronic Ditto Looper pedal, top-down view, showing the loop level knob and true bypass footswitch.
5. Istruzioni per l'uso
The DITTO LOOPER features a simple one-button interface for all looping functions. The LED indicator changes color to show the current mode:
- LED rosso: Modalità di registrazione.
- LED verde: Modalità di riproduzione.
- LED verde lampeggiante: Undo/Redo or Delete confirmation.
Video: Un oltreview of the TC Electronic Ditto Looper's features and basic operation, including recording, playback, and clearing loops.
5.1. Recording Your First Loop
To record your first loop:
- Premere una volta il pedale per avviare la registrazione. Il LED diventerà rosso.
- Riproduci la frase desiderata.
- Press the footswitch once again to stop recording and immediately start playback. The LED will turn green. Your loop will now play continuously.
5.2. Overdubbing
To add layers (overdubs) to your existing loop:
- While the loop is playing (green LED), press the footswitch once. The LED will turn red, indicating overdub recording has started.
- Play your new layer.
- Press the footswitch once again to stop overdubbing and return to playback mode. The LED will turn green.
- Repeat this process for unlimited overdubs.
5.3. Undo/Redo Last Overdub
To undo or redo your last recorded overdub:
- While the loop is playing (green LED), press and hold the footswitch for approximately 2 seconds. The LED will blink green once to confirm the undo action.
- To redo the undone overdub, press and hold the footswitch again for approximately 2 seconds. The LED will blink green once to confirm the redo action.
5.4. Interruzione della riproduzione
To stop the loop playback:
- While the loop is playing (green LED), quickly double-tap the footswitch. The loop will stop, and the LED will turn off.
5.5. Clearing the Loop
To completely erase the current loop:
- While the loop is stopped (LED off), press and hold the footswitch for approximately 2 seconds. The LED will blink green rapidly to confirm the loop has been cleared.
6. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Peso dell'articolo | 0.17 libbre (2.72 once) |
| Dimensioni del prodotto | 3.9"L x 2.5"W x 4"H (4 x 3.9 x 2.5 pollici) |
| Numero di modello | 960801001 |
| Materiale del corpo | Plastica |
| Tipo di connettore | 1/4-inch Audio (Barrel Connector for power) |
| Formato del segnale | Analogico |
| Fonte di alimentazione | Corded Electric (9V, 100mA or more) |
| Vero bypass | SÌ |
| Analog-Dry-Through | SÌ |
| Loop Time | 5 minuti |
| Sovraincisioni | Illimitato |
| Qualità audio | 24-bit uncompressed |
7. Manutenzione
To ensure the longevity and optimal performance of your DITTO LOOPER:
- Mantenere il pedale pulito e privo di polvere e detriti. Utilizzare un panno morbido e asciutto per la pulizia.
- Evitare di esporre il pedale a temperature estreme, umidità o luce solare diretta.
- Non utilizzare detergenti abrasivi o solventi.
- Store the pedal in a dry, cool place when not in use.
8. Risoluzione Dei Problemi
8.1. No Power / LED Not Lighting Up
- Ensure the 9V DC power supply is correctly connected and provides at least 100 mA.
- Verificare che la presa di corrente funzioni.
- Controllare il cavo di alimentazione per eventuali danni.
8.2. No Sound / Weak Sound
- Check all instrument cables for proper connection and ensure they are not faulty.
- Verify the "LOOP LEVEL" knob is turned up.
- Assicurati che amplifier is powered on and set to an audible volume.
- If using other pedals, temporarily bypass them to isolate the issue.
8.3. Loop Not Recording / Playing Back Correctly
- Ensure you are following the correct operating steps for recording and playback (single tap to record/play, double tap to stop).
- If experiencing pops or clicks, ensure your power supply is stable and providing clean power.
9. Garanzia e supporto
For warranty information and technical support, please refer to the official TC Electronic webo contattare direttamente il servizio clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.
TC Electronic Official Websito: www.telectronic.com
