Manuale utente del telecomando IR Dish Network 20.1

Introduzione

The Dish Network 20.1 IR Remote Control is designed to operate your Dish Network receiver and a television. This remote functions in Infrared (IR) mode, requiring a direct line of sight between the remote and the device being controlled. It is an upgraded version of the 20.0 remote, featuring expanded codes for compatibility with a wider range of newer televisions.

Caratteristiche principali

• Operates Dish Network receivers in IR mode.
• Compatible with various television models.
• Capable of learning codes from other IR remotes.
• Requires four AAA batteries for operation.

Impostare

1. Installazione della batteria

The Dish Network 20.1 remote control requires four (4) AAA batteries.

1. Individuare il coperchio del vano batterie sul retro del telecomando.
2. Far scorrere il coperchio verso il basso e sollevarlo.
3. Insert four AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Richiudere il coperchio del vano batteria facendolo scorrere in posizione finché non scatta in posizione.

Immagine: Frontale view of the Dish Network 20.1 IR Remote Control, showing button layout.

2. Pairing with Dish Network Receiver (IR Mode)

The 20.1 remote is designed to control Dish Network receivers in IR mode. For newer receivers like the Hopper and Joey, which may have originally shipped with a UHF remote, you might need to configure the receiver to accept IR commands. Consult your receiver's manual for specific instructions on enabling IR mode.

Typically, the remote will control the Dish receiver automatically once batteries are installed and the receiver is set to IR mode.

3. Programming for Television Control

To control your television's power, volume, and input functions, you will need to program the remote with your TV's code.

1. Accendi la televisione.
2. Premere e tenere premuto il tasto TV mode button on the remote until all four mode buttons (SAT, TV, DVD, AUX) illuminate.
3. Rilasciare il TV pulsante. Il TV il pulsante dovrebbe rimanere acceso.
4. Enter the 3-digit TV code for your television brand. Refer to the code list provided with your remote or search online for "Dish Network 20.1 TV codes" for your specific TV brand.
5. After entering the code, the TV button should flash three times and then turn off, indicating successful programming. If it does not flash, repeat the process.
6. Prova il telecomando premendo il tasto ENERGIA button to turn off your TV. If it works, the programming is complete. If not, try the next code for your TV brand.

Image: Dish Network 20.1 Remote Control shown alongside a sheet of programming codes and room labels.

Istruzioni per l'uso

Funzioni di base

• ENERGIA: Premere il tasto ENERGIA button to turn your Dish receiver and programmed TV on or off.
• VOLUME +/-: Adjusts the volume of your programmed television.
• CANALE +/-: Changes the channel on your Dish receiver.
• MUTO: Mutes or unmutes the sound on your programmed television.
• SELEZIONARE: Conferma le selezioni nei menu.
• GUIDA: Visualizza la guida ai programmi.
• MENU: Accesses the main menu of your Dish receiver.

Immagine: Primo piano view of the central buttons on the Dish Network 20.1 Remote Control, highlighting navigation and function keys.

Funzioni avanzate

• DVR: Accede alle funzioni del tuo videoregistratore digitale.
• PLAY/PAUSE, STOP, RECORD, FWD, BACK, SKIP BACK, SKIP FWD: Control playback of recorded content.
• INFORMAZIONI: Visualizza le informazioni sul programma.
• RICERCA: Initiates content search.
• VIEW TV IN DIRETTA: Returns to live television viewing.
• PIP (immagine nell'immagine): Controls Picture-in-Picture functionality, if supported by your receiver/TV.
• SCAMBIO: Swaps between two active channels or PIP windows.

Manutenzione

Sostituzione della batteria

Replace batteries when the remote's response becomes sluggish or the indicator lights do not illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.

Pulizia

To clean the remote, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.

Risoluzione dei problemi

Il telecomando non risponde

• Ensure there is a clear line of sight between the remote and the Dish receiver/TV. Obstructions can block the infrared signal.
• Controllare le batterie. Sostituirle se sono vecchie o scariche.
• Verify that the correct mode button (SAT for receiver, TV for television) is selected before pressing a command.
• If controlling a Dish receiver, ensure the receiver is configured for IR mode, especially if it originally came with a UHF remote.

TV Not Programming

• Double-check the TV code entered. Ensure it matches your television brand.
• Try all available codes for your TV brand from the provided list.
• Assicurati di tenere premuto il TV mode button long enough for all four mode buttons to light up before releasing.
• Se il TV button does not flash three times after entering the code, the code was not accepted. Repeat the programming steps carefully.

Specifiche

Garanzia e supporto

For warranty information and technical support, please refer to the official Dish Network website or contact Dish Network customer service directly.

Disclaimer legale: This product is shipped to continental U.S. only.