1. Introduzione
The XPOWER P-230AT Mini Air Mover is a compact and efficient air moving device designed for various drying, cooling, and ventilation tasks. It features a 1/5 HP motor, providing up to 800 cubic feet per minute (CFM) of airflow. The unit includes three adjustable speeds, four drying positions, a built-in timer, and dual power outlets for daisy-chaining multiple units or powering other devices.
2. Informazioni sulla sicurezza
Read and understand all instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the unit to a properly grounded outlet.
- Non utilizzare l'unità con un cavo o una spina danneggiati.
- Keep the air mover away from water or wet surfaces to prevent electric shock.
- Ensure all air intakes and outlets are clear of obstructions during operation.
- Do not use the unit in areas where flammable liquids or gases are present.
- Scollegare l'unità prima di effettuare qualsiasi operazione di manutenzione o pulizia.
3. Impostazione
Before initial use, ensure the unit is placed on a stable, level surface. The P-230AT can be positioned in four different angles (0°, 20°, 45°, and 90°) using its built-in kickstand to direct airflow as needed.
Figura 3.1: Fronte view of the XPOWER P-230AT Mini Air Mover, highlighting the control panel with speed and timer dials.
Connect the 10 ft. industrial power cord to a standard 115V AC grounded electrical outlet. The unit is equipped with dual thermal protection for safety.
Figura 3.2: lato view of the air mover, illustrating the auxiliary power outlets and circuit breaker for daisy-chaining.
The unit features two built-in auxiliary power outlets, allowing you to daisy-chain up to five additional P-230AT units or connect other electrical devices, provided the total output does not exceed 12 amps.
Figura 3.3: Esample of multiple P-230AT units connected in a daisy-chain setup for extended coverage.
4. Istruzioni per l'uso
The P-230AT is equipped with a speed control switch and a timer dial.
Figura 4.1: dettagliata view of the control panel, indicating the speed selector (OFF, 1, 2, 3) and timer dial (ON, 0-180 minutes).
- Selezione della velocità: Turn the speed control knob to select one of three airflow speeds (1, 2, or 3). Position '1' is the lowest speed, and '3' is the highest.
- Funzione timer: The timer dial can be set for continuous operation ('ON') or for a duration of up to 180 minutes (3 hours). To activate the timer, rotate the dial to the desired time setting. The unit will automatically shut off once the set time has elapsed.
- Posizioni di asciugatura: Adjust the unit's angle to 0°, 20°, 45°, or 90° to optimize airflow direction for specific drying or ventilation needs.
5. Manutenzione
Regular maintenance ensures optimal performance and extends the lifespan of your air mover.
- Pulizia: Pulire periodicamente l'esterno dell'unità con un detergenteamp cloth. Ensure the air intake and outlet grilles are free from dust, debris, and pet hair. Do not use harsh chemicals or abrasive cleaners.
- Magazzinaggio: When not in use, store the air mover in a clean, dry place. The unit is designed to be stacked up to six units high for efficient storage and transportation.
Figure 5.1: XPOWER P-230AT units stacked for compact storage.
6. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'unità non si accende | No power supply; tripped circuit breaker; timer not set. | Check power connection; reset circuit breaker on unit or wall; ensure timer is set to 'ON' or a specific time. |
| Flusso d'aria ridotto | Blocked air intake/outlet; motor issue. | Clear any obstructions from grilles; contact customer support if problem persists. |
| Rumore insolito | Detriti nella ventola; componenti allentati. | Unplug and inspect for debris; ensure all parts are secure. |
7. Specifiche
- Modello: P-230 AT
- Motore: 1 / 5 HP
- Capacità del flusso d'aria: 800 piedi cubi
- Velocità: 3
- Posizioni di asciugatura: 4 (0°, 20°, 45°, 90°)
- Timer: 3-hour (180 minutes) with 'ON' setting
- Ampera: 2.3 Amps (at highest setting)
- Voltage: 115 Volt
- Fonte di energia: Elettrico con cavo
- Dimensioni del prodotto: 10.7"D x 12.4"W x 13.3"H (Note: Product Dimensions from specifications show 30"D x 8"W x 6"H, but description states 10.7" x 12.4" x 13.3". Using description's dimensions as they align with 'compact'.)
- Peso dell'articolo: 9.9 libbre
- Materiale dell'alloggiamento: Injection-molded polypropylene (PP)
- Certificazioni di sicurezza: ETL/CETL
8. Garanzia e assistenza clienti
The XPOWER P-230AT Mini Air Mover is backed by a Garanzia limitata del produttore di 1 anni. For warranty claims, technical assistance, or customer support, please refer to the official XPOWER website or contact their customer service department directly. Keep your purchase receipt as proof of purchase for warranty validation.
