Unitech MS840 Rugged Handheld Laser Scanner
Model: MS840-SUBBGC-SG
1. Introduzione
The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.
Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.
2. Informazioni sulla sicurezza
Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.
- Sicurezza laser: This device uses a Class 1 laser. Do not stare directly into the laser beam or point it at others.
- Sicurezza elettrica: Use only the provided USB cable. Do not expose the device to water or extreme temperatures.
- Gestione: The MS840 is rugged, but avoid dropping it from excessive heights or subjecting it to severe impacts.
- Disposizione: Dispose of the device and its components according to local environmental regulations.
3. Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- Unitech MS840 Handheld Laser Scanner
- Cavo di collegamento USB
- Guida rapida (se applicabile)
4. Impostazione
Follow these steps to set up your Unitech MS840 scanner:
- Collegare il cavo USB:
Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).
- Installazione del driver:
The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.
- Test iniziale:
Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.
5. Funzionamento dello scanner
The Unitech MS840 is designed for simple and efficient barcode scanning.
- Accensione: The scanner powers on automatically when connected to a powered USB port.
- Mirando: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
- Scansione: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
- Indicazione di scansione riuscita: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- Codici a barre supportati: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.
6. Manutenzione
Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.
- Pulizia della finestra di scansione:
Regularly clean the scanning window with a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials.
- Pulizia generale:
Pulire l'esterno dello scanner con un panno morbido eamp panno. Evitare che l'umidità penetri nelle aperture.
- Cura del cavo:
Avoid bending or twisting the USB cable excessively. Store the cable neatly when not in use to prevent damage.
- Magazzinaggio:
Quando non lo si utilizza, conservare lo scanner in un ambiente pulito e asciutto, lontano dalla luce solare diretta e da temperature estreme.
7. Risoluzione Dei Problemi
If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Lo scanner non si accende. | Cavo USB non collegato correttamente o porta USB difettosa. | Assicurati che il cavo USB sia collegato saldamente sia allo scanner che al computer. Prova una porta USB diversa sul tuo computer. |
| Lo scanner non legge i codici a barre. | Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window. |
| I dati scansionati non vengono visualizzati sullo schermo. | Application not in focus, incorrect keyboard layout, or driver issue. | Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status. |
| Scanner beeps but no data. | Data transmission issue or application not ready. | Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue. |
If the problem persists after trying these solutions, please contact Unitech customer support.
8. Specifiche
Detailed technical specifications for the Unitech MS840 scanner:
| Caratteristica | Descrizione |
|---|---|
| Marca | Unitech |
| Modello | MS840-SUBBGC-SG |
| Tipo di scanner | Hand-held Laser Scanner |
| Tipo di elemento di scansione | Laser |
| Scan Speed / Rate | 100 scans/second (100 fps) |
| Tecnologia di connettività | Cavo (USB) |
| Tipo di interfaccia | USB |
| Dispositivi compatibili | Computer portatile, desktop |
| Dimensioni del prodotto (LxWxH) | 2.54 x 2.54 x 2.54 cm (25 x 25 x 25 millimetri) |
| Peso dell'articolo | 454 grammi (453.59 grammi) |
| Batterie richieste | NO |
| ASIN | B00C4OGY2I |
| Numero di identificazione commerciale globale (GTIN) | 00132017875439 |
| Prima data disponibile | 30 aprile 2013 |
9. Garanzia e supporto
Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech websito.
For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.
Note: Contact information for Unitech can typically be found on their official websito o nella confezione del prodotto.
