CRUX SOOGM-16 Radio Replacement Interface User Manual

Introduzione

This manual provides comprehensive instructions for the installation and operation of the CRUX SOOGM-16 Radio Replacement Interface. This interface is designed to facilitate the integration of an aftermarket radio into select General Motors (GM) LAN 29-Bit vehicles, while retaining essential factory features such as OnStar, warning chimes, and steering wheel control functionality.

Please read this manual thoroughly before beginning the installation process to ensure proper setup and to avoid potential damage to your vehicle or the interface.

Prodotto finitoview

The CRUX SOOGM-16 is an advanced interface module that allows for seamless integration of an aftermarket car stereo system into compatible GM vehicles. It ensures that critical factory features continue to function after the original radio is replaced.

CRUX SOOGM-16 Radio Replacement Interface module and wiring harnesses

Immagine 1: The CRUX SOOGM-16 interface module shown with its accompanying wiring harnesses and antenna adapter. This image displays all components included in the package, ready for installation.

Caratteristiche principali:

Retains factory OnStar system.
Preserves factory warning chimes.
Maintains steering wheel control (SWC) functionality.
Compatible with both Standard Bose, Premium Bose (Y91) amplified, and non-ampimpianti audio lificati.
Designed for select 2006-2014 GM LAN 29-Bit vehicles.
Includes necessary module and harness for installation.

Compatibilità

The CRUX SOOGM-16 is compatible with specific General Motors vehicles. Please verify your vehicle's make, model, and year against the following criteria:

Tipo di veicolo: Select GM LAN 29-Bit vehicles.
Anni modello: Telefono: 2006-2014.
Sistemi audio: Works with Standard Bose, Premium Bose (Y91) amplified, and non-ampsistemi lificati.

Nota: Always consult the vehicle-specific wiring diagrams and installation guides for your particular vehicle model to confirm compatibility and wiring details.

Contenuto della confezione

Dopo aver disimballato il prodotto, assicurarsi che siano presenti tutti i seguenti componenti:

CRUX SOOGM-16 Interface Module
Vehicle-Specific Wiring Harnesses
Adattatore per antenna
Steering Wheel Control (SWC) Cable (3.5mm jack)

CRUX SOOGM-16 components including module, harnesses, and antenna adapter

Immagine 2: Un dettagliato view of the CRUX SOOGM-16 module and its associated wiring components, including the main harness, auxiliary harness, and antenna adapter.

Istruzioni per l'installazione

Disclaimer: Professional installation is recommended. Disconnect the vehicle's negative battery terminal before beginning any electrical work.

1. Dip Switch Settings

The CRUX SOOGM-16 module features configurable dip switches to match your specific vehicle and aftermarket radio. Refer to the diagram below and your aftermarket radio's manual for correct settings.

Close-up of CRUX SOOGM-16 module showing dip switches

Immagine 3: Un primo piano view of the CRUX SOOGM-16 interface module, highlighting the dip switches. These switches must be set correctly according to your vehicle's configuration and aftermarket radio type.

General Dip Switch Configuration Guidelines:

SWC DIP: Set according to your aftermarket radio brand (e.g., Pioneer, Kenwood, Alpine, Sony, JVC, etc.). Consult the CRUX SOOGM-16 quick reference guide or CRUX website for specific brand settings.
CAN DIP: Typically set based on vehicle year and system type (e.g., Bose amplificato o nonamplificato).
Bose DIP: Set to 'ON' for Bose amplified systems, 'OFF' for non-Bose or non-ampsistemi lificati.

Incorrect dip switch settings can lead to improper functionality or damage.

2. Collegamenti elettrici

Connect the CRUX SOOGM-16 wiring harness to your aftermarket radio's harness. Match wire colors and functions carefully. Common connections include:

Alimentazione/Terra: Red (Accessory), Yellow (Constant 12V), Black (Ground).
Cavi dell'altoparlante: Front Left, Front Right, Rear Left, Rear Right (Positive and Negative).
Illuminazione: Orange (Illumination/Dimmer).
Reverse/Parking Brake: If applicable for your aftermarket radio.
Controllo del volante (SWC): Connect the 3.5mm jack from the SOOGM-16 harness to the SWC input on your aftermarket radio. If your radio uses a wired SWC input (e.g., Key1, Key2), refer to the SOOGM-16 wiring diagram for specific wire connections.
OnStar/Chime Output: These are managed by the SOOGM-16 module and integrated into the main harness.
Adattatore antenna: Connect the provided antenna adapter between the vehicle's antenna cable and the aftermarket radio's antenna input.

Ensure all connections are secure using crimp connectors or solder and heat shrink tubing. Avoid loose connections.

3. Collegamento del modulo

Once all wiring harness connections are made between the aftermarket radio and the SOOGM-16 harness, connect the SOOGM-16 harness to the CRUX SOOGM-16 interface module.
Connect the vehicle's factory harness to the corresponding connectors on the SOOGM-16 harness.
Ricollegare il terminale negativo della batteria del veicolo.

4. Test

Before fully reassembling the dashboard, perform the following tests:

Turn on the vehicle ignition and verify the aftermarket radio powers on.
Test all audio functions (radio, auxiliary inputs, USB, Bluetooth).
Verify steering wheel controls function correctly (volume up/down, track skip, mode).
Confirm OnStar functionality (if applicable).
Listen for factory warning chimes (e.g., door open, seatbelt reminder).

If any functions are not working, refer to the Troubleshooting section of this manual.

Istruzioni per l'uso

The CRUX SOOGM-16 interface operates automatically once correctly installed and configured. It translates the vehicle's data signals to allow your aftermarket radio to function seamlessly with retained factory features.

Comandi al volante (SWC)

Your factory steering wheel controls will operate the aftermarket radio as programmed. Common functions include:

Volume su/giù: Regola il livello di uscita audio.
Traccia su/giù: Salta le tracce o cambia le preimpostazioni radio.
Modalità/Fonte: Cycles through available audio sources on the aftermarket radio.
Disattiva audio: Disattiva l'uscita audio.

Nota: Specific button assignments may vary depending on your vehicle and aftermarket radio model. Some aftermarket radios may require a learning process for SWC functionality, which should be detailed in the radio's instruction manual.

Conservazione OnStar

The SOOGM-16 retains the factory OnStar system. When OnStar is activated, the audio will mute through the aftermarket radio, and the OnStar audio will be heard through the vehicle's speakers. The OnStar microphone and controls will function as they did with the factory radio.

Warning Chimes

All factory warning chimes (e.g., door ajar, seatbelt, low fuel) will be retained and reproduced through the vehicle's audio system, ensuring critical alerts are still audible.

Manutenzione

The CRUX SOOGM-16 Radio Replacement Interface is a sealed electronic module and requires no routine maintenance. Ensure it is installed in a dry, secure location within the dashboard, away from excessive heat or moisture.

Periodically check all wiring connections for security, especially if experiencing intermittent issues. Avoid exposing the module to direct sunlight or extreme temperatures.

Risoluzione dei problemi

Se riscontri problemi dopo l'installazione, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

No Power to Aftermarket Radio

Controllare la connessione della batteria: Ensure the vehicle's negative battery terminal is securely reconnected.
Controllare i fusibili: Verify the vehicle's accessory fuse and any inline fuses for the aftermarket radio are intact.
Cablaggio: Confirm the Yellow (Constant 12V) and Red (Accessory) wires are correctly connected from the SOOGM-16 harness to the aftermarket radio.
Collegamento del modulo: Ensure the SOOGM-16 module is securely plugged into its harness.

Steering Wheel Controls Not Functioning

Impostazioni dell'interruttore DIP: Re-verify the SWC dip switch settings on the SOOGM-16 module match your aftermarket radio brand.
SWC Connection: Ensure the 3.5mm SWC jack (or wired connection) is properly connected to the aftermarket radio's SWC input.
Configurazione radio: Some aftermarket radios require a manual programming or "learning" process for steering wheel controls. Consult your radio's manual.

No Factory Chimes or OnStar Audio

CAN Dip Switch: Verify the CAN dip switch setting on the SOOGM-16 module is correct for your vehicle's year and system type.
Bose Dip Switch: If your vehicle has a Bose system, ensure the Bose dip switch is set to 'ON'.
Collegamento del modulo: Ensure the SOOGM-16 module is fully seated in its harness.

Distorted or No Audio

Cablaggio degli altoparlanti: Check all speaker wire connections for correct polarity and secure contact.
Sistema Bose: If you have a Bose system, ensure the Bose dip switch is correctly set. Incorrect settings can cause audio issues.
Amplifier Remote: Ensure the remote turn-on wire for any factory or aftermarket amplifier is correctly connected.

If these steps do not resolve the issue, contact CRUX technical support or a qualified car audio installer.

Specifiche

Numero di modello	SOOGM-16
Marca	CRUX
Compatibilità	GM LAN 29-Bit Vehicles (2006-2014)
Audio System Support	Standard Bose, Premium Bose (Y91) amplified, and non-ampsistemi lificati
Retained Features	OnStar, Warning Chimes, Steering Wheel Controls
Ingresso volumetage	12 Volt
Dimensioni (L x P x A)	Approximately 1 x 1 x 1 inches (Module)
Peso dell'articolo	Circa 11.2 once
Codice UPC	850058234076

Garanzia e supporto

Informazioni sulla garanzia

CRUX products are typically covered by a limited manufacturer's warranty. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or visit the official CRUX websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Supporto tecnico

For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact CRUX technical support. Contact information can usually be found on the CRUX websito o sulla confezione del prodotto.

CRUX Websito: www.cruxinterfacing.com

	CRUX SOOGM-16: Sostituzione radio con OnStar e mantenimento SWC per veicoli GM LAN 29 bit (2006-2014) Comprehensive guide for the CRUX SOOGM-16 module, detailing its installation to retain factory features like OnStar, backup cameras, and steering wheel controls in GM LAN 29 Bit vehicles (2006-2014) when installing an aftermarket radio. Includes features, parts, wiring diagrams, troubleshooting, and vehicle compatibility.
	Interfaccia di sostituzione radio CRUX SWRGM-49 con mantenimento dei comandi al volante per veicoli GM LAN 29 bit 2006-2015 Questo documento fornisce informazioni sull'installazione e la risoluzione dei problemi per CRUX SWRGM-49, un'interfaccia radio sostitutiva progettata per veicoli GM LAN a 29 bit dal 2006 al 2015. Descrive in dettaglio le caratteristiche del prodotto, i componenti inclusi, gli schemi di installazione, le impostazioni dei DIP switch, i collegamenti dei cavi SWC, la selezione del sistema audio, la regolazione del volume del cicalino e il collegamento della telecamera di retromarcia. È inoltre elencata la compatibilità con i veicoli.
	Interfaccia di sostituzione radio CRUX SWRGM-49 con mantenimento dei comandi al volante Questo documento fornisce le caratteristiche del prodotto, gli schemi di installazione e la compatibilità con i veicoli per CRUX SWRGM-49, un'interfaccia di sostituzione radio progettata per i veicoli GM LAN 29-Bit dal 2006 al 2015. Descrive dettagliatamente come mantenere i comandi al volante, le caratteristiche di fabbrica e i sistemi audio.
	CRUX SOOGM-16: sostituzione radio GM con OnStar e mantenimento SWC Guida all'installazione e caratteristiche del prodotto per CRUX SOOGM-16, un'interfaccia sostitutiva della radio per veicoli GM LAN 29 Bit (2006-2014) che mantiene OnStar e i comandi al volante.
	CRUX SOOGM-15: GM Class II Radio Replacement with OnStar & SWC Retention Installation guide and product features for the CRUX SOOGM-15, a radio replacement interface for GM Class II vehicles. This device retains factory features like OnStar, steering wheel controls, and audio systems while allowing the installation of an aftermarket radio.
	CRUX SOOGM-15 Installation Guide for Select GM Class II Vehicles Comprehensive installation guide for the CRUX SOOGM-15 interface module, enabling OnStar radio replacement in select GM Class II vehicles (2000-UP). Covers compatibility, wiring, testing, audio control setup, and troubleshooting.

CRUX SOOGM-16