Sylvania 21369 13W T5 Fluorescente Lineare Lamp Manuale d'uso

1. Prodotto finitoview

The Sylvania 21369 is a 13-watt T5 linear fluorescent lamp designed for general purpose lighting applications. This lamp features a G5 miniature bi-pin base and emits a 3000K daylight white light. It is engineered to provide good color rendering, consistent lumen maintenance, and a long operational life.

Figure 1: A clear, cylindrical Sylvania T5 linear fluorescent lamp with a G5 miniature bi-pin base at one end.

Caratteristiche principali:

• Cosatage: 13 watt
• Voltage: 95 volt
• Temperatura del colore: 3000K (luce bianca diurna)
• Tipo di base: G5 Miniature Bi-Pin
• Durata media: 7500 ore
• Luminosità: 880 lumen

2. Informazioni sulla sicurezza

Read and understand all instructions before installing or operating this lamp. Failure to follow these safety guidelines may result in electric shock, fire, or personal injury.

• Sicurezza elettrica: Always turn off power to the fixture at the circuit breaker or fuse box before inspecting, installing, or removing the lamp.
• Gestione: Gestisci il lamp by its ends, avoiding direct contact with the glass tube. Oils from skin can create hot spots and reduce lamp vita.
• Compatibilità: Assicurare lampEcco cosatage, voltage, and base type (G5) are compatible with your fixture. Using an incompatible lamp can damage the fixture or cause a fire hazard.
• Disposizione: Fluorescente lamps contengono piccole quantità di mercurio. Smaltire lampsecondo le normative locali, statali e federali. Non smaltire nei normali rifiuti domestici.
• Rottura: In caso di lamp breakage, ventilate the area and carefully clean up glass fragments and powder using disposable gloves and a stiff paper or cardboard. Avoid using a vacuum cleaner.
• Solo per uso interno: Questo lamp is designed for indoor applications. Do not use in outdoor or wet locations unless specifically rated for such environments.

3. Configurazione e installazione

Follow these steps to safely install your Sylvania T5 linear fluorescent lamp:

1. Spegnimento dell'alimentazione: Locate the circuit breaker or fuse box that controls the power to the lighting fixture. Turn off the power completely before proceeding. Verify the power is off by attempting to turn on the light switch.
2. Rimuovi la vecchia Lamp (se applicabile): Se si sostituisce un esistente lamp, carefully rotate the old lamp approximately 90 degrees until the pins disengage from the lampholders. Gently pull the lamp straight out of the fixture.
3. Ispezionare l'apparecchio: Controlla la lampholders for any signs of damage or wear. Ensure they are clean and free of debris.
4. Inserisci nuova Lamp: Hold the new Sylvania 21369 lamp by its ends. Align the two pins on each end of the lamp con le fessure nella lamptitolari. Spingere delicatamente il lamp nella lampsupporti finché i perni non sono completamente inseriti.
5. Ruota Lamp: Once the pins are seated, rotate the lamp approximately 90 degrees until it locks securely into place. The lamp should feel firm and not loose.
6. Ripristina alimentazione: Return to the circuit breaker or fuse box and restore power to the fixture.
7. Prova Lamp: Turn on the light switch to confirm the new lamp funziona correttamente.

4. Istruzioni per l'uso

The Sylvania 21369 T5 linear fluorescent lamp operates by simply turning on the power to the fixture it is installed in. Ensure the lamp is properly installed as described in the 'Setup and Installation' section.

• Accendere: Activate the wall switch or fixture switch connected to the lamp. Il lamp should illuminate immediately or after a brief warm-up period, depending on the fixture's ballast type.
• Spegnere: Deactivate the wall switch or fixture switch to turn off the lamp.

Frequent switching (on/off cycles) can reduce the overall lifespan of fluorescent lamps. For optimal lamp life, avoid unnecessary switching.

5. Manutenzione

Proper maintenance ensures optimal performance and longevity of your Sylvania T5 fluorescent lamp.

• Pulizia: Periodicamente, con l'alimentazione spenta, pulire delicatamente lamp con un panno morbido, asciutto e privo di lanugine per rimuovere polvere e detriti. Non utilizzare detergenti liquidi direttamente sulla lamp.
• Sostituzione: Sostituisci la lamp when it reaches the end of its useful life (indicated by flickering, dimming, or failure to ignite). Always replace with a lamp of the same type, wattage, and base (Sylvania 21369 or equivalent 13W T5 G5).
• Ispezione degli apparecchi: Regularly inspect the lighting fixture for any signs of damage, loose wiring, or corrosion, especially around the lampholders. Address any issues promptly.

6. Risoluzione Dei Problemi

If your Sylvania T5 fluorescent lamp is not functioning as expected, consider the following troubleshooting steps:

• Lamp Non illuminazione:
  • Ensure power is supplied to the fixture (check circuit breaker/fuse).
  • Verificare la lamp is correctly seated and rotated in the lamptitolari.
  • Controllare se lamp is at the end of its life and requires replacement.
  • Inspect the fixture's ballast; a faulty ballast can prevent the lamp from igniting.
• Sfarfallio:
  • Flickering can indicate an aging lamp nearing the end of its life.
  • Assicurare lamp è installato in modo sicuro.
  • A failing ballast can also cause flickering.
  • Cold temperatures can sometimes cause flickering during startup.
• Emissione di luce fioca:
  • Polvere o sporcizia sulla lamp or fixture can reduce light output; clean as per maintenance instructions.
  • Il lamp may be nearing the end of its rated life.

Se questi passaggi non risolvono il problema, consultare un elettricista qualificato o contattare l'assistenza clienti.

7. Specifiche

8. Garanzia e supporto

Informazioni sulla garanzia:

This Sylvania 21369 13W T5 Linear Fluorescent Lamp è coperto da un Garanzia limitata di 2 anno from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accidents, or unauthorized repairs.

Conservare la prova d'acquisto per eventuali richieste di garanzia.

Assistenza clienti:

For technical assistance, warranty claims, or further information regarding your Sylvania product, please visit the official LEDVANCE websito web o contattare il servizio clienti. I dettagli di contatto sono in genere riportati sulla confezione del prodotto o sul sito web ufficiale del produttore. websito.

Risorse online: Per ulteriori informazioni e supporto sul prodotto, puoi visitare il sito Negozio LEDVANCE su Amazon.