Manuale di istruzioni per l'avviamento Denso 280-6000

Introduzione

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Denso 280-6000 Starter. Please read this manual thoroughly before attempting any installation or service to ensure safety and optimal performance of the product. This starter is designed for specific automotive applications and should only be installed by qualified personnel or individuals with appropriate mechanical knowledge.

Informazioni sulla sicurezza

Quando si lavora con componenti elettrici per autoveicoli, osservare sempre le seguenti precauzioni di sicurezza:

• Disconnect the vehicle's battery before beginning any work to prevent electrical shock or short circuits.
• Indossare adeguati dispositivi di protezione individuale, tra cui occhiali e guanti di sicurezza.
• Ensure the vehicle is securely supported on jack stands if working underneath it.
• Per le procedure specifiche e le specifiche di coppia, fare riferimento al manuale di assistenza del veicolo.
• Mantenere tutti gli utensili e le aree di lavoro puliti e liberi da detriti.
• In caso di dubbi su qualche passaggio, consultare un meccanico professionista.

Avvertenza sulla Proposta 65: Questo prodotto potrebbe contenere sostanze chimiche note allo Stato della California come causa di cancro, malformazioni congenite o altri danni riproduttivi. Per ulteriori informazioni, visitare il sito www.P65Warnings.ca.gov.

Configurazione e installazione

The Denso 280-6000 Starter is designed for direct replacement in compatible vehicles. Proper installation is crucial for its functionality and longevity.

1. Preparazione: Parcheggiare il veicolo su una superficie piana, inserire il freno di stazionamento e scollegare il terminale negativo della batteria. Lasciare raffreddare completamente il motore.
2. Locate the Old Starter: Consult your vehicle's service manual to identify the exact location of the starter motor. It is typically mounted on the engine block, near the transmission.
3. Scollegare il cablaggio: Carefully disconnect the main battery cable and the solenoid wire(s) from the old starter. Note their positions for reinstallation.
4. Rimuovere i bulloni di montaggio: Remove the bolts securing the old starter to the engine block. Be aware that these bolts can sometimes be tight or corroded.
5. Rimuovere il vecchio motorino di avviamento: Carefully maneuver and remove the old starter from its mounting position.
6. Install New Denso 280-6000 Starter: Position the new Denso 280-6000 Starter into place. Ensure it seats correctly.
7. Bulloni di montaggio sicuri: Reinstall the mounting bolts and tighten them to the vehicle manufacturer's specified torque.
8. Ricollegare il cablaggio: Reconnect the main battery cable and solenoid wire(s) to the new starter. Ensure all connections are clean and secure.
9. Ricollegare la batteria: Ricollegare il terminale negativo della batteria del veicolo.
10. Funzionalità di prova: Attempt to start the vehicle to confirm proper operation.

Image 1: The Denso 280-6000 Starter. This image displays the complete starter unit, highlighting its robust metal casing, electrical connections, and the gear assembly. The Denso brand label and model number are visible on the side.

Istruzioni per l'uso

Once correctly installed, the Denso 280-6000 Starter operates automatically when the vehicle's ignition key is turned to the "START" position or the start button is pressed. The starter motor engages the engine's flywheel, rotating the crankshaft to initiate the combustion process.

• Prima di tentare l'avviamento, assicurarsi che il veicolo sia in posizione di parcheggio (P) o di folle (N).
• Turn the ignition key to the "START" position or press the start button.
• Release the key/button once the engine starts. Avoid prolonged cranking to prevent damage to the starter and battery.

Manutenzione

The Denso 280-6000 Starter is designed for durability and typically requires minimal maintenance. However, periodic checks can help ensure its longevity and reliable performance.

• Condizioni della batteria: A healthy vehicle battery is essential for starter operation. Ensure your battery is fully charged and its terminals are clean and tight.
• Collegamenti elettrici: Periodically inspect the starter's electrical connections for corrosion or looseness. Clean and tighten as necessary (with the battery disconnected).
• Sicurezza del montaggio: Check that the starter mounting bolts remain tight.
• Fattori ambientali: Protect the starter from excessive moisture, dirt, and road debris where possible.

Risoluzione dei problemi

If you experience issues with your vehicle's starting system after installing the Denso 280-6000 Starter, consider the following common problems and solutions:

For complex issues or if basic troubleshooting does not resolve the problem, it is recommended to seek assistance from a certified automotive technician.

Specifiche

Key specifications for the Denso 280-6000 Starter:

• Marca: Denso
• Numero modello: 280-6000
• Voltage: 12 Volt
• Ampera: 15 Amps
• Cosatage: 80 watt
• Materiale: Metallo
• Finitura esterna: Dipinto
• Peso dell'articolo: Approximately 0.01 ounces (Note: This weight seems unusually low and may be a data entry error. Actual automotive starter weight is typically several pounds.)
• Dimensioni della confezione:
  • Lunghezza: 31.496 centimetri
  • Altezza: 15.24 centimetri
  • Larghezza: 14.732 centimetri
• Codice UPC: 042511198111
• Numero di parte del produttore: 280-6000

Garanzia e supporto

For specific warranty information regarding your Denso 280-6000 Starter, please refer to the documentation provided with your purchase or visit the official Denso website. Warranty terms and conditions can vary based on region and retailer.

For technical support, product inquiries, or assistance with warranty claims, please contact Denso customer service directly through their official channels. You can typically find contact information on the Denso websito o sulla confezione del prodotto.