Introduzione
This manual provides essential information for the safe and effective operation of your Icom R6 Sport Wide Band Handheld Communications Receiver. Please read this manual thoroughly before using the receiver to ensure proper functionality and to prevent damage.
The Icom R6 Sport is a versatile and compact receiver designed for wideband frequency coverage, offering superior sensitivity and resistance to interference. It is capable of receiving a broad range of communications, including amateur radio, AM/FM broadcasts, shortwave, and various utility signals.
Davanti view of the Icom R6 Sport Wide Band Handheld Communications Receiver, showing the display, control buttons, and antenna. The screen displays '1309.995 FM'. Below the screen are control buttons labeled 'BAND', 'TS SET', 'MODE SCAN', and 'V/M S.MW SKIP', along with navigation arrows and a power button.
Caratteristiche principali
- Wideband Coverage: Receives frequencies from 100kHz to 1309.995MHz.
- Memoria estesa: 1300 alphanumeric memory channels with 22 memory banks.
- Scansione ad alta velocità: Capable of scanning up to 100 channels per second.
- Voice Squelch Control (VSC): Opens squelch only for modulated signals, ignoring unmodulated noise.
- Audio forte: 150mW audio output with internal speaker.
- Automatic LCD Backlight: Migliora la visibilità in diverse condizioni di illuminazione.
- Priority Watch Function: Monitors a priority channel while scanning.
Impostare
1. Installazione della batteria
The Icom R6 requires two (2) AA alkaline batteries. Ensure correct polarity when inserting the batteries into the compartment located on the rear of the unit. Close the battery cover securely.
2. Attacco dell'antenna
Screw the supplied antenna (FA-S270C) clockwise onto the antenna connector at the top of the receiver until it is finger-tight. Do not overtighten.
3. Accensione iniziale
Premere e tenere premuto il tasto Energia button (labeled with a circle and vertical line) located on the front panel to turn the unit on. The LCD backlight will illuminate, and the display will show the current frequency.
Istruzioni per l'uso
1. Sintonizzazione della frequenza
Use the large rotary knob at the top of the unit to adjust the frequency. Alternatively, use the Up E Giù arrow buttons on the front panel for step-by-step tuning.
2. Selezione della modalità
Premere il tasto MODE SCAN button to cycle through available reception modes (e.g., FM, AM). The current mode is displayed on the LCD.
3. Funzioni di scansione
The R6 offers various scanning capabilities:
- Scansione VFO: Scans continuously within the selected frequency range.
- Scansione della memoria: Esegue la scansione dei canali di memoria programmati.
- Bank Link Scan: Allows scanning of selected memory banks.
To initiate a scan, press the MODE SCAN button until 'SCAN' appears, or refer to the detailed instructions in the full manual for specific scan types.
4. Memory Channel Programming
The receiver has 1300 alphanumeric memory channels. Programming can be complex via the front panel. It is highly recommended to use optional PC programming software and a cable for easier management of memory channels and settings. Consult the full manual for manual programming steps.
5. Voice Squelch Control (VSC)
The VSC function automatically opens the squelch only when a modulated signal is detected, effectively reducing noise from unmodulated beat signals. This is particularly useful when scanning for voice communications.
Manutenzione
1. Sostituzione della batteria
When the battery indicator on the LCD shows low power, replace both AA batteries promptly to ensure continuous operation. Always use fresh, high-quality alkaline batteries.
2. Pulizia
Wipe the receiver's exterior with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water and a mild detergent, then wipe dry. Do not use strong chemicals or abrasive cleaners.
3. Conservazione
If storing the unit for an extended period, remove the batteries to prevent leakage and corrosion. Store the receiver in a cool, dry place away from direct sunlight and extreme temperatures.
4. Resistenza all'acqua
The Icom R6 Sport is water resistant. However, it is not waterproof. Avoid submerging the unit in water or exposing it to heavy rain. Ensure all covers and ports are securely closed to maintain water resistance.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'unità non si accende. | Batterie scariche o installate in modo errato. | Sostituire le batterie con altre nuove, assicurandosi che la polarità sia corretta. |
| Nessuna ricezione o segnali deboli. | Antenna not properly attached; out of range; local interference. | Check antenna connection. Move to an area with better signal. Adjust squelch level. |
| Difficulty programming frequencies. | Complex manual programming interface. | Considera l'acquistoasing third-party PC programming software and a compatible cable for easier programming. |
| L'audio è distorto o troppo basso. | Volume too low; poor signal quality; internal speaker issue. | Adjust volume knob. Ensure strong signal. If problem persists, contact service. |
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | IC-R6 Sport |
| RX Frequencies | 100 kHz - 1309.995 MHz |
| Numero di canali | 1300 (with 22 memory banks) |
| Fonte di alimentazione | 3 Volts (2 x AA alkaline batteries) |
| Uscita audio | 150mW (internal speaker) |
| Peso dell'articolo | 14.4 once |
| Dimensioni del pacco | 8.62 x 6.57 x 2.95 pollici |
| Colore | Nero |
| Tecnologia sintonizzatore | Frequenza ultra-alta |
| Livello di resistenza all'acqua | Resistente all'acqua |
| Componenti inclusi | Antenna (FA-S270C), Belt clip, Hand strap |
Garanzia e supporto
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ICOM websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
If you encounter issues not covered in this manual or require service, please contact ICOM customer support or an authorized service center.
