1. Prodotto finitoview
The Aiphone GF-3B is a three-module backbox designed to serve as the foundational mounting component for modular entrance panel systems. It is specifically compatible with Aiphone GF, GH, and GT Series modular multi-tenant entry security systems. This backbox facilitates the secure installation of up to three modular components vertically, creating a robust and integrated entry panel solution.
The backbox is constructed from durable plastic and is intended for wall-mounting applications.
2. Contenuto della confezione
Dopo aver aperto la confezione, verificare che siano presenti tutti i componenti:
- Aiphone GF-3B backbox
- (2) Joint pipes
- Mounting gauge
3. Installazione e configurazione
The GF-3B backbox is designed for wall-mounting to establish the base for your modular entry panel system. Follow these general steps for installation:
- Selezione del sito: Choose a suitable wall location for the entry panel system. Ensure the surface is flat and capable of supporting the weight of the backbox and subsequent modules.
- Marcatura: Use the provided mounting gauge to accurately mark the drilling points on the wall.
- Perforazione: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., masonry, drywall).
- Mounting the Backbox: Secure the GF-3B backbox to the wall using appropriate fasteners (not included, typically supplied with the modular components or purchased separately based on wall type). Ensure the backbox is level and firmly attached.
- Integrazione del modulo: Once the backbox is securely mounted, individual Aiphone GF, GH, or GT series modular components (sold separately) can be inserted and secured into the backbox vertically. The backbox is designed to accept three such modules.
- Cablaggio: Route necessary wiring for the modular components through the designated openings in the backbox. Refer to the specific installation manuals for the modular components for detailed wiring instructions.
Figure 1: The Aiphone GF-3B Three-Module Backbox. This image shows the black, rectangular backbox designed to house three modular components vertically. It features mounting tabs along its sides for secure installation.
4. Funzionamento
The Aiphone GF-3B backbox itself does not have operational functions. Its purpose is to provide a secure and structured enclosure for the operational modular components of the Aiphone GF, GH, and GT Series multi-tenant entry security systems. Refer to the instruction manuals of the specific modular components (e.g., camera modules, audio modules, keypad modules) for their respective operational procedures.
5. Manutenzione
The GF-3B backbox requires minimal maintenance. To ensure longevity and proper function of the overall system:
- Pulizia: Periodically wipe the exterior of the backbox with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic material.
- Ispezione: Occasionally inspect the mounting points and the integrity of the backbox for any signs of damage or loosening. Ensure all modular components remain securely seated within the backbox.
- Condizioni ambientali: Ensure the backbox is installed in an environment consistent with the operating conditions specified for the modular components it houses.
6. Risoluzione Dei Problemi
As a passive mounting component, the GF-3B backbox typically does not experience "trouble" in the traditional sense. Most issues will relate to its installation or the performance of the modular components it houses.
- Montaggio allentato: If the backbox feels loose on the wall, re-tighten fasteners. If the wall material is compromised, consider using different anchors or relocating the unit.
- Difficulty Inserting Modules: Ensure the backbox is not warped or damaged. Verify that the modular components are correctly oriented and aligned before attempting to insert them. Do not force modules into place.
- Malfunzionamento del sistema: If the overall entry security system is not functioning, consult the troubleshooting guides for the specific Aiphone GF, GH, or GT series modular components installed within the backbox. The backbox itself is unlikely to be the cause of electronic malfunctions.
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | GF-3B |
| Dimensioni del prodotto (A x L x P) | 11-5/8 x 4-5/16 x 1-3/4 pollici (295 x 110 x 44 mm) |
| Overall Product Dimensions (Packaged) | 12 x 4.8 x 2.2 pollici; 12 once |
| Materiale | Plastica |
| Compatibilità | Aiphone GF, GH, and GT Series modular multi-tenant entry security systems |
| Capacità del modulo | Three modular pieces (vertical orientation) |
8. Garanzia e supporto
Per informazioni sulla garanzia del prodotto, sul supporto tecnico o sull'assistenza, fare riferimento al sito ufficiale Aiphone website or contact Aiphone customer service directly. Aiphone meets International Organization for Standardization (ISO) standards 9001 and 14001.
Sede centrale di Aiphone in Nord America: Bellevue, WA
For the most current support resources, visit: www.aiphone.com
