Feit Electric LEDR56/827 Dimmable LED Retrofit Kit User Manual

1. Prodotto finitoview

The Feit Electric LEDR56/827 Dimmable LED Retrofit Kit is an energy-efficient lighting solution designed to replace traditional incandescent bulbs in 5-inch and 6-inch recessed can fixtures. This kit provides 1250 lumens of 2700K soft white light, equivalent to a 120-watt incandescent bulb, while consuming only 20.5 watts. It is fully dimmable and offers instant brightness, with an estimated lifespan of up to 50,000 hours (approximately 45.7 years based on 3 hours/day usage). The kit is Energy Star approved and includes a standard base adapter and a pre-mounted trim for easy installation.

Feit Electric LEDR56/827 Dimmable LED Retrofit Kit product packaging

Image 1.1: Packaging for the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, highlighting its 120W equivalent brightness and energy efficiency.

Caratteristiche principali:

Efficienza energetica: 20.5W power consumption, 120W incandescent equivalent.
Alta luminosità: 1250 lumen.
Temperatura del colore: 2700K Soft White.
Dimmerabile: Fully dimmable for adjustable light levels.
Lunga durata: Up to 50,000 hours (45.7 years).
Compatibilità: Fits most 5-inch and 6-inch recessed cans.
Certificazioni: Energy Star approved.

2. Informazioni sulla sicurezza

Before installing or servicing this product, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione dal fusibile o dall'interruttore automatico prima dell'installazione o della manutenzione.
AVVERTIMENTO: Risk of fire. Do not install this product in a luminaire that exceeds the wattage del bulbo.
This product is for use with 120V, 60Hz circuits.
Adatto per damp posizioni.
Do not use with standard dimmers unless specified as compatible. Use only with dimmers designed for LED products.
Ensure the recessed can fixture is properly grounded.
Non tentare di modificare il prodotto. Qualsiasi modifica potrebbe invalidare la garanzia e creare rischi per la sicurezza.
Tenere lontano dalla portata dei bambini.

Avvertenza sulla Proposta 65: Questo prodotto può contenere sostanze chimiche note allo Stato della California come causa di cancro, difetti alla nascita o altri danni riproduttivi.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione.

1x LED Retrofit Kit (integrated LED trim)
1x Standard Base Adapter (E26 screw-in adapter)

Components of the Feit Electric LED Retrofit Kit, showing the LED trim and the E26 screw-in adapter.

Image 3.1: The LED retrofit kit components, including the main LED light unit and the screw-in adapter.

4. Istruzioni per l'installazione

This retrofit kit is designed for easy installation into existing 5-inch or 6-inch recessed can housings. No tools are typically required.

Spegnimento dell'alimentazione: Before starting, ensure the power to the recessed fixture is turned off at the circuit breaker or fuse box to prevent electrical shock.
Rimuovere la lampadina e la modanatura esistenti: Carefully remove the existing light bulb and any old trim from the recessed can fixture.
Adattatore a vite: Screw the provided standard base (E26) adapter into the light socket of the recessed can. Ensure it is securely tightened.
Collegare il cablaggio: Locate the orange connector on the LED retrofit kit. Plug this connector into the corresponding connector on the standard base adapter.
Insert into Can: Gently push the LED retrofit kit into the recessed can opening. The spring clips on the sides of the LED unit will secure it in place against the ceiling. Ensure the trim is flush with the ceiling.
Ripristina alimentazione: Once the kit is securely installed, restore power at the circuit breaker.
Luce di prova: Accendere l'interruttore della luce per verificarne il corretto funzionamento.

Avvicinamento view of the Feit Electric LED Retrofit Kit showing the spring clips and electrical connector for installation.

Image 4.1: Detail of the LED retrofit kit, illustrating the spring clips for securing it in the recessed can and the connector for the E26 adapter.

5. Istruzioni per l'uso

The Feit Electric LEDR56/827 retrofit kit operates like a standard light fixture but offers dimming capabilities.

Accensione/spegnimento:

Use your existing wall switch to turn the light fixture on or off. The LED will provide instant full brightness.

Funzione di attenuazione:

This LED retrofit kit is fully dimmable. To utilize the dimming feature, ensure you have an LED-compatible dimmer switch installed. Adjust the dimmer switch to achieve your desired light level. The 2700K Soft White color temperature provides a warm, inviting glow, ideal for living rooms, bedrooms, and dining areas.

Comparison of different light color temperatures: Soft White (2700K), Bright White (3000K), and Daylight (5000K), showing the visual effect of each.

Image 5.1: Visual representation of various color temperatures. This product provides 2700K Soft White light.

Chart illustrating different color temperatures (Soft White, Bright White, Cool White, Daylight) and their recommended uses in various room settings.

Image 5.2: A guide to choosing light temperatures, indicating that Soft White (2700K-3000K) is ideal for living rooms and resembles standard incandescent bulbs.

6. Manutenzione

The Feit Electric LEDR56/827 LED Retrofit Kit requires minimal maintenance due to its long lifespan and integrated LED design.

Pulizia: Ensure power is off before cleaning. Wipe the trim and diffuser with a soft, dry, or slightly damp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura o i componenti elettrici.
Sostituzione LED: The LEDs are integrated and not user-replaceable. The unit is designed for a long operational life. If the LED fails, the entire unit should be replaced.
Ispezione: Ispezionare periodicamente l'apparecchio per verificare la presenza di eventuali danni o collegamenti allentati. In caso di problemi, spegnere l'alimentazione e consultare un elettricista qualificato.

7. Risoluzione Dei Problemi

If you experience issues with your LED retrofit kit, refer to the following common problems and solutions:

Problema	Possibile causa	Soluzione
La luce non si accende.	Nessuna alimentazione al dispositivo. Collegamento allentato. Faulty fixture or LED unit.	Controllare l'interruttore o il fusibile. Ensure adapter is screwed in tightly and connector is secure. Contact customer support if steps above do not resolve the issue.
La luce tremola o si attenua in modo anomalo.	Interruttore dimmer incompatibile. Collegamento del cablaggio allentato.	Ensure an LED-compatible dimmer is used. Check all connections are secure (with power off).
La luce non è a filo con il soffitto.	Le clip a molla non sono completamente inserite. Obstruction in the recessed can.	Gently push the unit further into the can until clips engage. Remove any debris or obstructions from the can.

8. Specifiche

Numero di modello	LEDR56/827
Marca	Feit elettrico
Cosatage	20.5 Watt
Equivalente a incandescenza	120 Watt
Luminosità	1250 Lumens (1245 Lumens listed in some specs)
Temperatura del colore	2700K bianco morbido
Dimmerabile	SÌ
Durata	50,000 ore (circa 45.7 anni)
Voltage	120 Volt
Base della lampadina	E26 (Standard)
Tipo di apparecchio	Recessed Retrofit Kit
Compatibilità	5 & 6 Inch Recessed Cans
Uso interno/esterno	Interno (Adatto per damp località)
Certificazioni	Energy Star, UL, cUL
Peso dell'articolo	0.66 libbre (10.5 once)

9. Garanzia e supporto

According to the product specifications, there is no explicit warranty provided for this item. For technical support or inquiries regarding the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, please contact Feit Electric customer service.

Di solito puoi trovare le informazioni di contatto sul sito ufficiale del produttore websito o sulla confezione del prodotto.

Feit elettrico Websito: www.feit.com