Manuale utente del tagliabordi/tagliabordi a batteria Ryobi RY40201A 40V

1. Informazioni sulla sicurezza

AVVERTIMENTO: To reduce the risk of injury, the user must read and understand this instruction manual before using this product.

• Always wear safety glasses and gloves during operation.
• Be aware of potential flying debris and cut hazards.
• Seguire sempre attentamente le istruzioni di montaggio.
• Tenere i bambini e gli astanti a distanza di sicurezza.
• Do not operate the tool in wet conditions.

2. Prodotto finitoview

The Ryobi RY40201A is a versatile 40V cordless string trimmer and edger designed for efficient lawn maintenance. This bare tool requires a compatible 40V battery and charger (not included).

Figura 1: generale view of the Ryobi 40V Cordless String Trimmer/Edger.

Figure 2: Close-up of the trimmer head and shaft, highlighting the cutting mechanism.

Figura 3: parte inferiore view of the trimmer head, showing the line exit point and protective guard.

3. Impostazione

3.1 Montaggio

This product requires assembly. Refer to the included assembly guide for detailed instructions on attaching the shaft, handle, and guard. Ensure all connections are secure before use.

3.2 Installazione della batteria

1. Ensure the trimmer is turned off and the trigger is disengaged.
2. Align the 40V lithium-ion battery with the battery port on the tool's handle.
3. Inserire la batteria nella porta finché non scatta in posizione.
4. Per rimuoverla, premere il fermo di rilascio della batteria e farla scorrere fuori.

4. Istruzioni per l'uso

4.1 Starting the Trimmer/Edger

1. Assicurarsi che la batteria sia completamente carica e installata saldamente.
2. Tenere saldamente il tagliabordi con entrambe le mani.
3. Press the safety lock-out button (if applicable) and then squeeze the trigger to start the motor.
4. Rilasciare il grilletto per arrestare il motore.

4.2 Operazione di rifinitura

• Hold the trimmer with the cutting head parallel to the ground.
• Move the trimmer slowly and steadily across the area to be trimmed.
• Maintain a safe distance from obstacles and other individuals.

4.3 Operazione di bordatura

• To convert to edger mode, rotate the trimmer head 90 degrees. This model features a wheel for easier edging.
• Position the wheel on the hard surface (e.g., driveway, sidewalk) and guide the cutting line along the edge of the lawn.
• Apply gentle pressure and move at a consistent pace for a clean edge.

Figure 4: User demonstrating the Ryobi 40V Trimmer/Edger in action.

5. Manutenzione

5.1 Sostituzione della linea

• Always remove the battery before performing any maintenance.
• Refer to the product manual for specific instructions on how to open the trimmer head and replace the cutting line.
• Use only the recommended line diameter for optimal performance.

5.2 Pulizia e conservazione

• After each use, clean the trimmer head and guard of any grass clippings or debris.
• Conservare l'utensile in un luogo asciutto e sicuro, fuori dalla portata dei bambini.
• Remove the battery during storage to prevent accidental startup.

6. Risoluzione Dei Problemi

7. Specifiche

• Marca: RYOBI
• Numero modello: RY40001 W/ RY40022
• Fonte di energia: Battery Powered (40V Lithium-ion, battery and charger sold separately)
• Colore: Verde
• Peso dell'articolo: 8 libbre
• Larghezza di taglio: 15 inches (approximate, based on typical string trimmer specifications for this model type)
• Dimensioni del prodotto: 33.5 x 8.1 x 9.2 pollici
• Assemblaggio richiesto: SÌ
• Codice UPC: 046396005779

8. Garanzia e supporto

For warranty information and customer support, please refer to the documentation included with your product or visit the official RYOBI websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.