Introduzione
The Braun Series 5 52S Electric Shaver Replacement Head is designed to restore your Braun Series 5 electric shaver to 100% performance. Over time, the cutting parts of your shaver will gradually wear out, leading to a less close and comfortable shave. Replacing the shaver head ensures your shaver maintains its maximum performance and provides an efficient, comfortable shave.
Image: Braun Series 5 52S Replacement Head in its retail packaging, highlighting restored performance.
Compatibilità
This replacement head (Model 52S) is compatible with the following Braun Series 5 electric shaver models:
- Braun Series 5 (Models 5030, 5040, 5090)
- Braun Series 5 (Models 5090/5190cc, 5040/5140s, 5030s, 5147s, 5145s, 5195cc, 5197cc)
Image: A hand holding a Braun Series 5 electric shaver, demonstrating the shaver with its head.
Installazione
Replacing your Braun Series 5 shaver head is a simple process. Follow these steps to ensure proper installation:
- Ensure your shaver is turned off and unplugged from any power source.
- Grip the sides of the existing shaver head and gently pull it upwards to detach it from the shaver body.
- Unpack the new Braun Series 5 52S replacement head.
- Align the new head with the shaver body and press down until it clicks securely into place.
- Verify that the head is firmly attached before turning on the shaver.
Video: Official Braun guide demonstrating the replacement process for the Series 5 52S Electric Shaver Head.
Image: A man using a Braun electric shaver, illustrating the product in action.
Operating with New Head
Once the new 52S replacement head is installed, your Braun Series 5 shaver will deliver optimal performance. The advanced cutting elements are designed to capture more hair in fewer strokes, providing a close and comfortable shave with minimal skin pressure and reduced irritation.
For best results, shave against the direction of hair growth, holding the shaver at a 90-degree angle to your skin. Apply gentle pressure and stretch your skin with your free hand to ensure all hairs are captured.
Manutenzione
Regular maintenance of your shaver head is crucial for sustained performance and hygiene. Braun recommends changing your shaver head every 18 months to maintain maximum performance and prevent skin irritation.
Pulizia della testina del rasoio
- After each use, turn off the shaver and remove the head.
- Rinse the shaver head under warm running water to remove hair clippings and debris.
- For a more thorough cleaning, use a cleaning brush (if provided with your shaver) to gently remove stubborn hair particles.
- Allow the shaver head to air dry completely before reattaching it to the shaver body or storing it.
- If your shaver is compatible with a Clean&Charge station, use it regularly for automatic cleaning, lubrication, and charging.
Image: The Braun Series 5 52S Replacement Head, emphasizing the recommended 18-month replacement cycle.
Image: Braun Clean&Charge refill cartridge, used for automatic cleaning and maintenance of compatible shavers.
Risoluzione dei problemi
If you experience issues after replacing your shaver head, consider the following:
- Prestazioni di rasatura ridotte: Ensure the new head is securely attached. If performance remains low, verify that the replacement head is genuine Braun and compatible with your specific Series 5 model.
- Irritazione cutanea: Always handle the shaver with care. If irritation occurs, ensure the shaver head is clean and that you are not applying excessive pressure during shaving. Allow your skin to adapt to the new head for a few shaves.
- Rumore o vibrazione: Check that the shaver head is correctly seated and locked into place. A loose head can cause unusual noise or vibration.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | 52S |
| Compatibilità | Braun Series 5 Electric Shavers |
| Sostituzione consigliata | Ogni 18 mesi |
| Dimensioni del prodotto | 4.02 x 1.1 x 4.37 pollici |
| Peso dell'articolo | 0.73 once |
| Produttore | Procter & Gamble |
| Codice UPC | 069055873540 |
Image: The Braun Series 5 52S Replacement Head, featuring the 'Designed in Germany' emblem.
Garanzia e supporto
For information regarding product warranty, returns, or additional support, please refer to the official Braun websito o contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto.
You can visit the official Braun Store for more information and support: Negozio Braun su Amazon
