Introduzione
This manual provides instructions for the installation, operation, and maintenance of your SOMFY Situo RTS Pure radio wall transmitter. This device is designed for the manual control of one or more radio-controlled Somfy drives, such as blinds, awnings, or roller shutters. Please read this manual carefully before using the product to ensure safe and correct operation.
Istruzioni di sicurezza
- Tenere il dispositivo lontano dall'umidità e dalle temperature estreme.
- Non tentare di aprire o riparare il dispositivo da soli. Per qualsiasi intervento di assistenza, rivolgersi a personale qualificato.
- Assicurarsi che la batteria sia inserita correttamente rispettando la polarità indicata.
- Smaltire le batterie usate in modo responsabile secondo le normative locali.
- Questo dispositivo è destinato esclusivamente all'uso in ambienti interni.
Prodotto finitoview
The SOMFY Situo RTS Pure is a sleek, handheld radio transmitter designed for intuitive control of your Somfy RTS products.
Questa immagine mostra la parte anteriore view of the SOMFY Situo RTS Pure radio wall transmitter. It is a white, rectangular device with three gray circular buttons arranged vertically in the center: an 'up' arrow, a 'my' button, and a 'down' arrow. Below the buttons, there is a small black indicator light. The Somfy logo is subtly embossed at the bottom.
Componenti chiave:
- Pulsante Su (^): Moves the connected drive upwards (e.g., opens blinds).
- My Button (my): Stops the drive or recalls a pre-programmed favorite position.
- Pulsante Giù (v): Moves the connected drive downwards (e.g., closes blinds).
- Spia luminosa: Provides visual feedback on commands and battery status.
- Programming Button (rear): Used for pairing the transmitter with Somfy RTS drives.
Impostare
1. Installazione della batteria
- Gently slide open the battery compartment cover on the back of the transmitter.
- Insert the supplied battery (type CR2430) ensuring correct polarity (+/-).
- Chiudere saldamente il coperchio del vano batterie.
2. Pairing with a Somfy RTS Drive
To control a Somfy RTS drive, the transmitter must first be paired. This process typically involves using an existing paired transmitter or the drive's programming button.
- Using an existing transmitter: Take an already programmed RTS transmitter that controls the desired drive. Press and hold its programming button (usually on the back) until the drive moves briefly.
- Immediately after the drive moves, take your new Situo RTS Pure transmitter. Press and hold its programming button (located on the back, often recessed) until the drive moves briefly again. This confirms successful pairing.
- Without an existing transmitter: Refer to the specific instructions for your Somfy RTS drive to put it into programming mode. Once the drive is in programming mode, press the programming button on your Situo RTS Pure transmitter until the drive moves briefly.
Note: If you are pairing with multiple drives, repeat the process for each drive or group of drives.
Istruzioni per l'uso
Controllo di base:
- To move the drive up (e.g., open blinds), press the ^ pulsante.
- To move the drive giù (e.g., close blinds), press the v pulsante.
- A fermare the drive at any point, press the my pulsante.
Setting a Favorite Position ('my' position):
- Move the drive to your desired favorite position using the ^ or v pulsanti.
- Once at the desired position, press and hold the my button until the drive moves briefly. This saves the position.
Recalling a Favorite Position:
- From any position, a short press of the my button will move the drive to its pre-programmed favorite position.
Manutenzione
Sostituzione della batteria:
When the indicator light on the transmitter no longer illuminates or the range decreases significantly, it is time to replace the battery.
- Slide open the battery compartment cover on the back of the transmitter.
- Rimuovere la vecchia batteria CR2430.
- Insert a new CR2430 battery, observing the correct polarity (+/-).
- Chiudere il coperchio del vano batterie.
Note: Dispose of old batteries according to local environmental regulations.
Pulizia:
Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il trasmettitore non risponde. | Batteria scarica. | Sostituire la batteria. |
| Autonomia operativa ridotta. | Low battery or radio interference. | Replace battery. Check for sources of interference (e.g., large metal objects, other radio devices). |
| Drive does not respond after pairing. | Pairing unsuccessful or drive is not powered. | Repeat the pairing process. Ensure the drive has power. |
Specifiche
- Modello: Situo RTS Pure
- Numero di modello del produttore: 322147
- Marca: Somfy
- Frequenza radio: 433.42 MHz
- Rolling Code System: SÌ
- Allineare: Approximately 20 meters (indoors, depending on environment)
- Tipo di batteria: CR2430 (incluso)
- Dimensioni: 1 x 1 x 1 cm (approximate, as per product data); 60 grams
- Uso previsto: Al chiuso
Garanzia e supporto
Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale Somfy website or contact your local Somfy dealer. Keep your proof of purchase for warranty claims.
Risorse online: www.somfy.com
