1. Introduzione
This user manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Utility Shop Light, model 917972. This versatile LED shop light is designed to provide bright, efficient illumination for various indoor spaces such as garages, basements, game rooms, utility rooms, workshops, cabinets, closets, and attics.

Figure 1: Feit Electric LED Utility Shop Light (Model 917972) packaging, highlighting its features and design.
2. Informazioni sulla sicurezza
Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di installare o utilizzare questo prodotto. La mancata osservanza di queste istruzioni potrebbe causare scosse elettriche, incendi o altre lesioni.
- Scollegare sempre l'alimentazione prima dell'installazione o della manutenzione.
- Do not install near heat sources or in wet locations. This product is designed for indoor use only.
- Assicurarsi che la superficie di montaggio possa sostenere il peso dell'apparecchio.
- Non guardare direttamente la sorgente luminosa a LED quando è accesa.
- Utilizzare solo con alimentazione 120 V CA.
- Se il cavo flessibile esterno o il filo di questa lampada risulta danneggiato, dovrà essere sostituito esclusivamente dal produttore, dal suo agente di assistenza o da una persona qualificata, per evitare pericoli.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Feit Electric LED Utility Shop Light Fixture (Model 917972)
- Two (2) 6-inch (15 cm) Hanging Cables
- Two (2) Mounting Screws for flush mount installation
4. Configurazione e installazione
The Feit Electric LED Utility Shop Light offers two primary installation methods: hanging and flush mount.
4.1. Installazione sospesa
- Identify the desired location for the shop light. Ensure it is near a power outlet.
- Attach the two 6-inch (15 cm) hanging cables to the designated slots on the top of the shop light fixture.
- Securely attach the other end of the hanging cables to a sturdy overhead structure (e.g., ceiling joists, chains, or hooks) using appropriate hardware (not included, unless specified in package contents). Ensure the fixture is level and stable.
- Plug the power cord into a standard 120V AC grounded outlet.
4.2. Flush Mount Installation
- Determine the exact mounting points on the ceiling or wall where the fixture will be installed. Mark these points accurately, ensuring they align with the mounting holes on the fixture.
- Drill pilot holes at the marked locations, if necessary, suitable for the provided mounting screws.
- Align the fixture's mounting holes with the pilot holes.
- Insert and tighten the two mounting screws to secure the fixture firmly against the surface. Do not overtighten.
- Plug the power cord into a standard 120V AC grounded outlet.
5. Istruzioni per l'uso
The Feit Electric LED Utility Shop Light is designed for simple operation.
- Once properly installed and plugged into a live 120V AC outlet, the light will illuminate instantly.
- To turn the light ON/OFF, use the wall switch connected to the outlet, or unplug the fixture from the outlet. Note: This fixture does not include an integrated ON/OFF switch or pull chain.
- The LED technology provides instant full brightness with no humming.
6. Manutenzione
The Feit Electric LED Utility Shop Light requires minimal maintenance.
- Pulizia: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- LED: The integrated LED lights are designed for long life and are not replaceable. Do not attempt to open the fixture or replace the LEDs.
- Ispezione: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Risoluzione Dei Problemi
If you experience issues with your shop light, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | No power to the outlet; fixture not properly plugged in; faulty outlet or wall switch. | Check if the outlet has power (test with another device). Ensure the plug is fully inserted. Check the circuit breaker. Verify the wall switch is ON. |
| La luce tremola o si affievolisce. | Loose connection; incompatible dimmer switch (this fixture is not dimmable); voltage fluttuazioni. | Ensure the plug is secure. Do not use with a dimmer switch. If flickering persists, consult an electrician. |
| Rumore ronzante. | Not applicable for this LED fixture. | This LED fixture is designed for no humming. If humming occurs, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact Feit Electric customer support.
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Feit elettrico |
| Numero di modello | 917972 |
| Tipo di sorgente luminosa | GUIDATO |
| Temperatura del colore | 4100 Kelvin (bianco freddo) |
| Cosatage | 38 Watt |
| Potenza luminosa | 3700 lumen |
| Ore di vita | 50,000 ore |
| Voltage | 120 Volt (CA) |
| Materiale | Copper, Metal (Fixture) |
| Dimensioni del prodotto | 47 x 6 x 3 pollici |
| Peso dell'articolo | 2.1 libbre |
| Uso interno/esterno | Al chiuso |
| Tipo di installazione | Flush Mount, Hanging |
9. Garanzia e supporto
Feit Electric products are designed for durability and performance. This product is warrantied for five years from the date of purchase against defects in workmanship and materials. For warranty claims or technical support, please contact Feit Electric customer service.
Feit Electric Customer Service:
- Websito: www.feit.com
- Telefono: Refer to the official Feit Electric websito per i numeri di contatto attuali.
Si prega di conservare la ricevuta d'acquisto come prova d'acquisto ai fini della garanzia.





